[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".
View of the input side of the 24VDC dual relay module View of the output side of the 24VDC dual relay module Closeup view of the output side of the 24VDC dual relay module Closeup view of the input side of the 24VDC dual relay module Closeup view of the top of the relay of the 24VDC dual relay module Long dimension of the 24VDC dual relay module at 2 inches Short dimension of the 24VDC dual relay module at 2 inches Dimension of the mounting holes that are farthest apart of the 24V dual relay module at 1.82 inches Short mounting dimension of 1.59 inches of the 24Vdc dual relay module
View of the input side of the 24VDC dual relay module View of the output side of the 24VDC dual relay module Closeup view of the output side of the 24VDC dual relay module Closeup view of the input side of the 24VDC dual relay module Closeup view of the top of the relay of the 24VDC dual relay module Long dimension of the 24VDC dual relay module at 2 inches Short dimension of the 24VDC dual relay module at 2 inches Dimension of the mounting holes that are farthest apart of the 24V dual relay module at 1.82 inches Short mounting dimension of 1.59 inches of the 24Vdc dual relay module
Price Options Your Cart
24VDC Dual Relay
$10.95
Introduction:

Control high powered devices with this dual 24V relay.

Description:

Requires a 24VDC input to turn the relay on and off.

The relay features:

- NC (Normally Closed) and NO (Normally Open) operation

- 10 amps at 250 volts or 15 amps at 125 volts AC

- LED indication of which relay is engaged

- LED indication of power from a 24V source

- Active high or low operation for each input

- Optoisolated communication between the input and the relay coil so there will be no harmful back current from the relay coil

- Screw terminals for easy wiring

This dual relay is great for controlling CNC devices like spindles. Use with dual relay with our popular Mach3 USB Controller

Dimensions of the board is 2 in x 1.8 in. Mounting dimensions are 1.82 in x1.59 in


Related Tutorials
Thumbnail: greenLean instructional image Installing the Spoilboard on the greenLean CNC Machine
Here is a tutorial on setting and permanently mounting the Spoilboard on the greenLean 4x8 Vertical CNC Machine. We recommend you use a 2nd person to help you lift and place the board. You should also mount your machine to the wall before permanently attaching the Spoilboard.
CNC Electronics Tutorial Image CNC Electronics and Wiring
This tutorial will make you an expert in wiring CNC electronics using a parallel breakout board and standard stepping motors and stepping motor drivers.
Thumbnail: USB Controller wired to one driver and one stepper motor Wiring the CNC Motion Electronics with the USB Interface
Here is a tutorial on connecting drivers and stepping motors to the USB Interface for CNC machines. We offer the USB interface/controller for those that have a laptop, or don't have a parallel port on their computer, and who prefer to use the Planet-CNC software. Here I show a video on the entire process to get your USB Interface connected to the stepper drivers and stepper motors correctly and in a simple and trouble free way.