• primary image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • primary thumbnail of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • variant image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • variant image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • variant image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
1 5

BuildYourCNC

LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank

LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank

$145.45 USD
$145.45 USD
Sale Sold out
Title

LMT Onsrud 60-171MW LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter Designed for maximum life when cutting in high wear applications. Unique geometries and carbides improve the wear characteristics of the tool under abrasive applications with superior part finish. Use on double sided laminated and vaneered materials.

View full details

Questions & Answers

Have a Question?

Ask a Question

  • what is the recommended firmware for the awc708c laser controller? I see this download on the Sinjoe site: AWC708 Lite Update Firmware 160901L1

    We have not had any issues with stock firmware on the AWC708lite. Upgrading the firmware will be at your own risk. We can contact our supplier and see if they can provide a suggestion for updating firmware. Contact customerservice@buildyourcnc.com to inquire with a person who can help. Additional Information: Working area setting Additional Information: Working area setting

  • How should I connect the limit switches to my laser controller?

    If you are using the AWC708 or equivalent laser controller, the limit switches will connect between the EL input terminal and the GND terminal in normally open (NO) connection. Most limit switches can be connected as NO, or normally closed (NC). For instance, a limit switch for the X- limit will be connected from the ELX- terminal to the NO connection of the limit switch, then a connection from the GND terminal on the laser controller to the COM connection to the same limit switch.

  • Do you have instructions how to mount the AWC708 DSP on the blackTooth?

    We are working on getting these on the blackTooth page Additional Information: Ok, thanks. Do you use a separate 24V P/S for the supply voltage on the AWC708C or tap into the stepper motor P/S?