BuildYourCNC - 1/4" x 1 1/2" Flat Head Machine Screw

1/4 inch x 1 1/2 inch UNC 20 TPI Flat Head

1/4" x 1 1/2" Flat Head Machine Screw

Price Options Your Cart

Screw 1/4 x 1 1/2 Flat Head Screw (5 Pack)

$0.87

Introduction:

This is a flat head machine screw with a length of 1 1/2 inches and a diameter of 1/4 inches. The length is the total length of the screw including the head of the screw since the head is intended to be flush with the surface of the material by countersinking the hole into which the screw will be inserted. The thread is UNC (Unified National Coarse) which is for this 1/4 inch screw is 20 TPI (Threads per inch).

Description:

Ask a question about the 1/4" x 1 1/2" Flat Head Machine Screw:

Previously answered questions:

Click on the question to reveal the answer.

No previous questions. Be the first to ask a question about this product.

----

Related Tutorials

Thumbnail: How to modify the cable carrier. Removing the pin.

Cable Carrier Demonstration and Modification Instructions
We started carrying these new cable carriers that contain yellow hinge pins. The construction of the cable carrier is sturdy, but still has great flexibility. With this sturdiness comes the non-intuitive method of modifying the cable carrier. How is it possible to remove links, or put two cable carriers together? Also, how many wires, cables and tubes fit within the cable carriers.

Image of the electronics inside of a plug and play cnc electronics system

Diagnosing and Fixing a Non-working Axis
Are you pulling your hair out trying to solve issues with your CNC machine? Maybe the X-axis has decided to play hard to get? Don't fret. In this video, I'll walk you through the intricate maze of CNC electronics, from transformers and drivers to contactors and controllers. We'll diagnose a real-world problem with the X-axis of a CNC machine, using nothing but methodical testing and common sense. So, grab your multimeter and let's turn that blinking error light into a green light of glory.

Two motors moving in opposite directions

How To Have Two Motors on a Single Axis Spinning in Opposite Directions on a CNC Machine
In this tutorial we will demonstrate how to have two motors on a single axis spinning in opposite directions with the use of a hex inverter.

Related Products

1/4" x 1" Machine Screw

1/4" x 2 1/2" Machine Screw

1/4" x 1 1/2" Machine Screw

1/4" Hex Nut

5 1/4 x 3 inch screws shown with a mechanical pencil for scale.

1/4" x 3" Machine Screw

1/4" x 4" Machine Screw

----