[ Log In ]
[ Register ]
Price Options Your Cart
Porter Cable Series 690 / 7500 Kit. Out of Stock
$105.95

Includes free technical support.Learn More
Bosch (1617/1618/1619) Kit
$105.95 Out of Stock

Includes free technical support.Learn More
Introduction:

Here is a kit with all of the collets (1/8", 1/4" and 1/2"), nut and spanner wrench. Additionally, this kit contains a cleaning and lubricating solution that has a special blend of ingredients to clean out all of the gunk, rust and other foreign materials that you don't want in your router. This will insure that your tool has minimal runout.

Description:

Kit Contents:
1. 1/8" collet
1. 1/4" collet
1. 1/2" collet
1. Collet cleaning solution

Ask a question about the Complete Router Collet Kit:
Previously answered questions:

Click on the question to reveal the answer.
No previous questions. Be the first to ask a question about this product.
--
Related Tutorials
DIY tramming a cnc router Tramming the Router or Spindle (Making Sure it's Perpendicular to the Table)
Tramming the head (spindle or router) of a CNC router can be done with a simple old machinist trick using a long bar bent in a special way so that you can very accurately ensure the router or spindle is perpendicular to the bed (table) of the CNC machine.
Step 30: Router Mount Part 1
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The first of the videos for the router mount is finally edited and ready to post. The z-axis bearing supports were made in the current shape to be able to hold the router with a piece of stock in-between containing a hole for the router. This hole will need the ability to tighten against the router for stability and leveling. For my machine, I'm making one mount. This router mount will be positioned around the upper part of the router housing. Later, I will be installing a vacuum connection which will also serve as increased support for the router.
Step 33: Router Mount Part 4
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. This is the final step for the first phase of the router mount. I say first phase, because I will build a vacuum attachment that will also serve as an additional router mount. You will see the method at which I mount the router in this video. Instead of routing out a perfect circle, and we all know how good I am at routing out circles, and squeezing the circle around the router housing, the router mount will come in two parts and act like a vice. I did not want to put any undue stress on the wood by using the squeeze method, but it woks fine. I used it on my last machine and I had no problems and I even used only 1/2" thick MDF for the mount.
--
Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.