Tech Video Clips
Programming: Making the Hobby Servo Turn the Ho...
The values are 800 (.8 ms) and 2200 (2.2 ms). These numbers can be further tweaked to turn the horn more towards its limits. The OCR1A for the first position...
Programming: Making the Hobby Servo Turn the Ho...
The values are 800 (.8 ms) and 2200 (2.2 ms). These numbers can be further tweaked to turn the horn more towards its limits. The OCR1A for the first position...
Programming: Making the Hobby Servo Turn the Ho...
The OCR1A for the first position is moved into the while(1) never ending loop. A delay is introduced because it takes time for the servo to get to the intended...
Programming: Making the Hobby Servo Turn the Ho...
The OCR1A for the first position is moved into the while(1) never ending loop. A delay is introduced because it takes time for the servo to get to the intended...
Programming: Making Sure Library is Compiled on...
All libraries (header files .h) that are created for c or c++ programs must have code in them to make sure they are not compiled more than once. The use...
Programming: Making Sure Library is Compiled on...
All libraries (header files .h) that are created for c or c++ programs must have code in them to make sure they are not compiled more than once. The use...
Programming: LCD Sending a Command and Character
This is an example of sending a command to clear the screen of the LCD and sending a character to the LCD.
Programming: LCD Sending a Command and Character
This is an example of sending a command to clear the screen of the LCD and sending a character to the LCD.
Programming: LCD Code for the Sending a Command...
To send a command to the LCD, the data port connected to the LCD must have the data on that bus and the data will remain on that bus while...
Programming: LCD Code for the Sending a Command...
To send a command to the LCD, the data port connected to the LCD must have the data on that bus and the data will remain on that bus while...
Programming: LCD Code for the Sending a Charact...
To send a character to the LCD, the data port connected to the LCD must have the data on that bus and the data will remain on that bus while...
Programming: LCD Code for the Sending a Charact...
To send a character to the LCD, the data port connected to the LCD must have the data on that bus and the data will remain on that bus while...