Tech Video Clips

Datasheet, Paper and Programming: Timer/Counter...

The prescaling is investigated using the CS10, CS11 and CS12 prescaler control bits in the TCCR1B timer/counter control register.

Datasheet, Paper and Programming: Timer/Counter...

The prescaling is investigated using the CS10, CS11 and CS12 prescaler control bits in the TCCR1B timer/counter control register.

DARPA Robotics Challenge 2013 - Team SCHAFT - D...

Team SCHAFT successfully opens the second door which requires the robot to pull the door rather than push the door. Team SCHAFT's robot then walks through the second door. The...

DARPA Robotics Challenge 2013 - Team SCHAFT - D...

Team SCHAFT successfully opens the second door which requires the robot to pull the door rather than push the door. Team SCHAFT's robot then walks through the second door. The...

DARPA Robotics Challenge 2013 - Team SCHAFT - D...

Team SCHAFT successfully opens the first door.

DARPA Robotics Challenge 2013 - Team SCHAFT - D...

Team SCHAFT successfully opens the first door.

Darlington Transistors, the Benefits and Downfa...

Darlington transistors are a couple of transistors connected together. The benefit of using a darlington transistor over a standard transistor is the higher beta value. The higher beta value allows...

Darlington Transistors, the Benefits and Downfa...

Darlington transistors are a couple of transistors connected together. The benefit of using a darlington transistor over a standard transistor is the higher beta value. The higher beta value allows...

Cutting a Breakaway Header

One way to cut breakaway header strips using a pair of wire cutters or snips. Pliers can also be used and best if two pliers are used. Fingers are also...

Cutting a Breakaway Header

One way to cut breakaway header strips using a pair of wire cutters or snips. Pliers can also be used and best if two pliers are used. Fingers are also...

Creating a Folder to Store the C Program (main.c)

Creating a folder to store the program and project files and saving files into for the C or AVR-GCC project using programmers notepad for WINAVR. The main program should be...

Creating a Folder to Store the C Program (main.c)

Creating a folder to store the program and project files and saving files into for the C or AVR-GCC project using programmers notepad for WINAVR. The main program should be...