Tech Video Clips
Connecting the USBTiny to the Computer
Connecting the USBTiny AVR Pocket Progrmmer to the computer using a USB cable.
Connecting the USBTiny to the Computer
Connecting the USBTiny AVR Pocket Progrmmer to the computer using a USB cable.
Connecting the SPI to the Microcontroller
Connecting the SPI ribbon cable from the USBTiny AVR Pocket Progrmmer to the convenient interface connector so the connector can reach the appropriate pins on the AVR microcontroller.
Connecting the SPI to the Microcontroller
Connecting the SPI ribbon cable from the USBTiny AVR Pocket Progrmmer to the convenient interface connector so the connector can reach the appropriate pins on the AVR microcontroller.
Connecting Power All Around a Breadboard (2 Bre...
Connecting two breadboards and powering all of the GND - and VCC + rails on the breadboards. Wires are connected between the two breadboards and wires are connected between the...
Connecting Power All Around a Breadboard (2 Bre...
Connecting two breadboards and powering all of the GND - and VCC + rails on the breadboards. Wires are connected between the two breadboards and wires are connected between the...
Connecting a Motor to a Battery
To make a motor spin, a battery can be connected to a DC motor.
Connecting a Motor to a Battery
To make a motor spin, a battery can be connected to a DC motor.
Configuring: How to Change Syntax Color and Fon...
In this case, the brackets {} or [] and Parenthesis () are changed to highlight their positions which allows better visual of the containing code or condition. To changes these...
Configuring: How to Change Syntax Color and Fon...
In this case, the brackets {} or [] and Parenthesis () are changed to highlight their positions which allows better visual of the containing code or condition. To changes these...
Concept of Transferring a Program to a Microcon...
Introduction to the concept of transfering a program from the computer to the microcontroller using a programmer like the USBTiny.
Concept of Transferring a Program to a Microcon...
Introduction to the concept of transfering a program from the computer to the microcontroller using a programmer like the USBTiny.