[ Log In ]
[ Register ]
80W Laser Power Supply 80W Laser Power Supply
80W Laser Power Supply 80W Laser Power Supply
Price Options Your Cart
80W CO2 Laser Power Supply - 110V
80W CO2 Laser Power Supply - 220V

Connect this power supply to an 80 Watt CO2 Laser Tube to create the lasing.


This 80W laser power supply is standard onboard with our Vertical Laser XL machine. It pairs with the 80W laser tube. This unit comes with laser wire and connector for CO2 laser tubes.

Technical Specifications

  • AC Input Voltage: AC220V or AC110V
  • DC Input Voltage: DC300V or DC150V
  • AC Input Frequency: 47~440Hz
  • Voltage Output: 25KV
  • Maximum Current: 20mA (depending on the laser tubes of different manufacturers)
  • Overcurrent Protection: 130% of maximum current
  • Open Circuit Protection: Yes (short term)
  • Structure: Fan cooling
  • High Electric Level Control Voltage Range =3V
  • Low Electric Level Control Voltage Range =0.8V
  • Working Temperature: -30°C~+65°C
  • Relative Humidity: 20~85%RH (no condensation)
  • Insulation Resistance=50MO (DC500V)
  • Earth Leakage Current=1mA(AC220V) =0.5 mA(AC110V)
  • Vibration Resistance Amplitude: 0.5mm frequency 10~55Hz 3D direction 2 hours
  • Test Time at Full Load and 60°C: 12 hours
  • Power Supply Switch Test within 7 Seconds: 500 times

Ask a question about the 80 Watt Laser Tube Power Supply:
Previously answered questions:

Click on the question to reveal the answer.
Related Tutorials
40 Watt CO2 Laser Bulb with yellow sticker. How to Test a CO2 Laser Tube for Power
In this tutorial we'll explain the process for properly testing a CO2 laser tube for power. In this example we are testing a 40W CO2 laser tube and 40W power supply.
Vertical Laser XL graphic Press Release: BuildYourCNC Announces New Vertically-Oriented Laser Engraving Machine
BuildYourCNC is pleased to announce the new Vertical Laser XL: 4x8 80W CO2 Laser Engraver.
Laser mirror alignment Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.
Get Help with:
This Product
Tech Support
This Product
Order Query
Tech Support
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.