• 80W Laser Power Supply
  • 80W Laser Power Supply
1 2

BuildYourCNC

80 Watt Laser Tube Power Supply

80 Watt Laser Tube Power Supply

$299.99 USD
$299.99 USD
Sale Sold out
Title
Connect this power supply to an 80 Watt CO2 Laser Tube to create the lasing. This 80W laser power supply is standard onboard with our Vertical Laser XL machine. It pairs with the 80W laser tube. This unit comes with laser wire and connector for CO2 laser tubes. Technical Specifications
  • AC Input Voltage: AC220V or AC110V
  • DC Input Voltage: DC300V or DC150V
  • AC Input Frequency: 47~440Hz
  • Voltage Output: 25KV
  • Maximum Current: 20mA (depending on the laser tubes of different manufacturers)
  • Overcurrent Protection: 130% of maximum current
  • Open Circuit Protection: Yes (short term)
  • Structure: Fan cooling
  • High Electric Level Control Voltage Range =3V
  • Low Electric Level Control Voltage Range =0.8V
  • Working Temperature: -30°C~+65°C
  • Relative Humidity: 20~85%RH (no condensation)
  • Insulation Resistance =50MO (DC500V)
  • Earth Leakage Current =1mA(AC220V) =0.5 mA(AC110V)
  • Vibration Resistance Amplitude: 0.5mm frequency 10~55Hz 3D direction 2 hours
  • Test Time at Full Load and 60°C: 12 hours
  • Power Supply Switch Test within 7 Seconds: 500 times
View full details

Questions & Answers

Have a Question?

Ask a Question

  • I need some help, can I pay you for your time? I have a old Golden Laser has 2 co2 lasers 80 watts each, trying to put a new Ruida 6445G contorller in it.

    Yes, if you wish to get help with a product that was not purchased at buildyourcnc.com, you can go to this link and purchase a token: https://www.buildyourcnc.com/item/sub-assemblies-Technical-support-token