BuildYourCNC - 4th Axis with Tail Stock 100mm Chuck

New 3D Resins Comparison Table:
We've just launched a new, comprehensive 3D Resins Comparison Table to help you find the perfect resin for any application. Explore now and elevate your 3D printing experience with ease and precision. Say goodbye to searching all over the web for scattered information.

Livestreams Every Weekday at 1:00 pm Eastern
Join me and likeminded others on a livestream I host every weekday where I experiment, learn and discover. Topic for Tuesdays and Thursdays: CNC Discussion and Random Experiments. Topic for Mondays, Wednesdays and Fridays: Microcontroller programming and circuit building.

Headstock shown with 3 additional jaws and mechanical pencil for scale (not included)

Tailstock shown with mechanical pencil for scale.

4th Axis with Tail Stock 100mm Chuck

Price Options Your Cart

CNC Rotary 4th Axis with 3 Jaw Chuck,K11-100mm Hollow Shaft with 65mm Tailstock,Reducing Ratio:6:1

$280.00

Our Amazon Pick

4th Axis with Tail Stock 100mm Chuck 65mm Height to Center

$340.00

Includes free technical support.

Introduction:

This is a 4th axis which will add additional functionality to your machine. It comes with head stock, tail stock, and integrated stepper motor. It also includes 2 sets of Jaws for inside or outside diameter gripping.

Description:

The 4th axis adds a great deal of additional functionality to your CNC machine that you wouldn't normally get otherwise. A 4th axis can be used to cut along an arc, or be used in what is called indexing mode or continuous mode, meaning the cutting is done from a stationary point or while in full (continuous) rotation. The 4th axis makes machining something complex like a gear possible.

Specifications for 4th Axis:

Chuck: K11 100mm (3.93") 3-jaw chuck Center hight: 65mm (2.55") Hollow shaft diameter: 21mm (0.826") Total height: 115MM (4.52") Angle: 0.3 degrees / stepReduction ratio: 6:1Stepper motor: Nema 23 stepper motor Dimension: 210x168x115mm 8.26"x6.61"x4.52" Gross weight: 10.5kg (23.14 lbs)

Tailstock:Center Height: 65MMStretch distance: 50MMWeight: 2.1KG

How to wire the stepping motor that is attached to the 4th axis:The motor will have red, green, yellow and blue wires coming from the motor. The connections are as follows:- Red to A+- Green to A-- Yellow to B+- Blue to B-

Ask a question about the 4th Axis with Tail Stock 100mm Chuck:

Previously answered questions:

Click on the question to reveal the answer.

[4th Axis with Tail Stock 100mm Chuck] Will this work with the OneFinity Elite series with the MASSO controller?

Yes, this 4th axis system will work with the Masso controller. The 4th axis has a standard stepper motor. You will need a driver between the Masso controller and the stepper motor.
Click the link to add information to this solution:
[410] Will this work with the OneFinity Elite series with the MASSO controller?
[4th Axis with Tail Stock 100mm Chuck] is therer a harmonic or planitary gearbox in nthe headstock, or is it just driven by the pully?

No, the motor shaft is directly coupled to the chuck via timing belts and drive pulleys. The mechanical advantage in this system is by using a small drive pulley on the motor shaft to the larger drive pulley on the shaft of the chuck.
Click the link to add information to this solution:
[410] is therer a harmonic or planitary gearbox in nthe headstock, or is it just driven by the pully?
[4th Axis with Tail Stock 100mm Chuck] what I need to buy to make this work on my GreenBull machine and the redfly?

Since this 4th axis already comes with a stepper motor, you will need a driver and some cable to connect to the driver from where the 4th axis will be placed. If you have extra space in the redFly electronics enclosure, you can fasten the driver there. You will also need some wire to connect the driver to the breakout baord.
Click the link to add information to this solution:
[410] what I need to buy to make this work on my GreenBull machine and the redfly?
[4th Axis with Tail Stock 100mm Chuck] will this 4th axis work on laguna 1q cnc

The Laguna 1Q has 154 mm of gantry clearance which is enough to clear the 100mm chuck and base of the 4th axis.
Click the link to add information to this solution:
[410] will this 4th axis work on laguna 1q cnc