[ Log In ]
[ Register ]

Strip Brushes are really useful for aiding in the capture of dust and chips being ejected from the milling process on the CNC machine (the router or spindle cutting process). The dust shoe that can be found on most of our CNC machines uses this strip brush. The strip brush encloses the cutting area and the vacuum creating an area of negative pressure, so the chips or dust will be carried directly to the vacuum end. The strip brush also serves as a wall or barrier that the chips will hit rather than getting ejected into the air. Just make a groove the same width of the rubber side of the brush and glue the brush in.


Color black
Bristles on track are 2 1/2" long by 1/4" thick.

Ask a question about the 2" Flexible Strip Brush (Great for making dust shoes for the router or spindle):
Previously answered questions:

Click on the question to reveal the answer.
  • [2" Flexible Strip Brush (Great for making dust shoes for the router or spindle)] What is the backing material and it's dimensions.

    The backing material of the strip brush is .23 inches wide and .18 inches high. The material is unknown, but can easily be bent at a radius of 3 inches.

    Click the link to add information to this solution:
    [92] What is the backing material and it's dimensions.

  • [2" Flexible Strip Brush (Great for making dust shoes for the router or spindle)] How long is this?

    The length is continuous. The quantity purchased is the length of strip brush that you will receive.

    Click the link to add information to this solution:
    [92] How long is this?

Related Tutorials
Step 21: Driver Caps, Resistor Networks and Mosfets
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The resistors are in, right? Ah, I know, you want to see the complete assembly before you dig in. Ok, on to this part of the assembly. Please don't ask me what Mosfets are, but the word sound cool! I can tell you that they stand for Metal Oxide Semiconductor Field Effect Transistor. I have personally read about fifty descriptions of this electronic animal and I still can't figure it out. It doesn't say much for a Berkeley grad! Well, I'm open to some plain English interpretations without the word "drain" in them. Are you still with me?
Laser mirror alignment Laser Mirror Alignment Tutorial for Vertical Laser XL
In this series we'll be explaining how to align the laser mirrors on your Vertical Laser XL machine. Note that these techniques can also be used for alignment on the blackTooth laser cutter and engraver.
thumbnail for assembling CNC closed-loop electronics for a customer Assembling Closed-Loop Electronics with a 7.5kW Spindle
Watch this video to learn about the assembly process of closed-loop CNC electronics, including component arrangement, wiring considerations, and challenges faced. Discover valuable insights and tips for ensuring proper functionality and effective shielding.
Get Help with:
This Product
Tech Support
This Product
Order Query
Tech Support
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.