• Tumbnail: image of the 2 inch strip brush for the dust shoe for CNC Machines and CNC Routers
1 1

BuildYourCNC

2" Flexible Strip Brush (Great for making dust shoes for the router or spindle)

2" Flexible Strip Brush (Great for making dust shoes for the router or spindle)

$0.80 USD
$0.80 USD
Sale Sold out
Title
Strip Brushes are really useful for aiding in the capture of dust and chips being ejected from the milling process on the CNC machine (the router or spindle cutting process). The dust shoe that can be found on most of our CNC machines uses this strip brush. The strip brush encloses the cutting area and the vacuum creating an area of negative pressure, so the chips or dust will be carried directly to the vacuum end. The strip brush also serves as a wall or barrier that the chips will hit rather than getting ejected into the air. Just make a groove the same width of the rubber side of the brush and glue the brush in. Color black
Bristles on track are 2 1/2" long by 1/4" thick.
View full details

Questions & Answers

Have a Question?

Ask a Question

  • Having issues not used laser cutter for a while now it only cuts transversal lines not image lines any ideas

    Are both the x and y axes moving? If engraving, is the machine doing the swing movements? Additional Information: both x and y move the laser turns on at the traverse lines and off at the image lines Additional Information: both x and y move the laser turns on at the traverse lines and off at the image lines Additional Information: Can you make a video and put a link to the video here? Additional Information: https://www.youtube.com/watch?v=LtV0pc92Dl0 Additional Information: solved software issue went back to an older version all set Additional Information: solved software issue went back to an older version all set

  • Hi....do you have this: https://buildyourcnc.com/item/strip-brush available in 3" long?

    No, at this time, we only have this strip brush in 2" bristle measurements. You are the first to request a longer length. If we see more interest, we will get the longer bristle lengths.

  • During my first install, I set my units in inches. I later had to switch to millimeters and was told to uninstall and re-install my Mach 3. However when I did my re-install, my (config.) settings repopulated to the values I had set previously. How do I wipe my config settings clean?

    Select the Mach3 Loader icon on the desktop and create a new profile. Make sure "Default Profile Values" is checked.

  • does the skirt come with combo #1

    No the skirt does not come with the kit. Here's a link to where you can buy it https://www.buildyourcnc.com/item/strip-brush.

  • BRUSH STRIP 7518 ROUTER

    Specifically for a blackToe/blackFoot the total length for a 7518 router brush strip is 19 1/2" inches.

  • What should the "glue groove" width be for flexible strip brush?

    The width and height that we have on our brush piece for our cnc machines, is 1/4" width and .30" depth , the length is dependent on your specific dimension of brush and the design of the brush piece.

  • Are there contour type brushes available for leadscrews and round rails

    Yes, you can use these flexible strip brushes and create a mount for the contour that you need: https://www.buildyourcnc.com/item/strip-brush

  • Does the 2in flexible strip brush also come in 4in lengths for the bristle?

    At this time, we only have 2 inch bristle length. How would you apply the 4 inch bristle? Would it be used for a CNC machine, or another application? We might be able to supply this longer bristly length if we can see a good market for it.

  • What is the backing material and it's dimensions.

    The backing material of the strip brush is .23 inches wide and .18 inches high. The material is unknown, but can easily be bent at a radius of 3 inches.

  • How long is this?

    The length is continuous. The quantity purchased is the length of strip brush that you will receive.