BuildYourCNC
1" x 0.87" Cable Carrier Bracket Set
1" x 0.87" Cable Carrier Bracket Set
These are the brackets for each side of the 1" x 0.87" cable carrier. This set includes both end brackets. The brackets are used to fasten the cable carrier to the machine, one end at a stable point and the other end at the moving part. You will need one bracket set for each axis that will have a cable carrier.
Share
Questions & Answers
Have a Question?
-
WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?
If you take the standard parallel cable BoB (Break Out Board), then you will need control software (Mach 3 or EMC2) and CAM software to make your G-Code (such as CamBam). Personally I use CamBam and Mach 3, they work beautifully but don't expect to turn them on and know how they work out of the box. Give yourself a few weeks to get familiar with the basics. CamBam is VERY powerful software for it's price. I'm surprised how much I keep learning on what I can do with it...I highly recommend it if you want as much control as possible. Mach 3 + CamBam as a bundle costs $310. EMC2 will give you a free replacement for Mach 3 and is exclusively for Linux. If you use the USB BoB, it will cost an extra $75 + $75 for the software. This is an all-in-one package so no need for Mach 3 or CamBam. For etching rasters (jpeg, bmp, tiff, non-vectors, photos), I highly recommend PicEngrave. It has been a labor of love for the past 9 years and John has done a wonderful job with it. It easily compares in quality compared to software that is in the $200-$300 range. John's software runs $40 and can be found here: http://picengrave.com/ (don't let the modest website fool you, this stuff can do amazing things). DotG and the Mach3 engrave plugin are two other options and instructions can be found on Dustans page in the gallery on buildyourcnc.com website. Additional Information: Additional Information: Additional Information: