• Industrial Water Chiller for 60-80 watt laser
1 1

BuildYourCNC

Industrial Water Chiller for 60-80W CO2 Laser

Industrial Water Chiller for 60-80W CO2 Laser

$399.99 USD
$399.99 USD
Sale Sold out
Title
This is an industrial water chiller used to circulate coolant to a 60-80W CO2 laser tube. These chillers are specifically made to work on 110v mains. This is the same water chiller that is included with our 80W Vertical Laser XL machine. The chiller features a radiator that cools via forced wind. It has an alarm system when the water is at a high temperature. Includes drainage line for easy draining and refilling. The CW-3000 is recommended for use with 60-80W Laser Tubes. You may use purified water as coolant, changed out periodically (every couple weeks). If using rough water, replace more frequently. Note: May not come with 110V power cord. A standard 110V power cable (commonly known as a PC power cord) will work fine with this unit.
  • Power Supply: AC 100-120V, 60Hz
  • Current: 0.9A (AC100-120V)
  • Cooling: Forced Cooling - Radiator
  • Tank Capacity: 9L
  • Amount of Cooling: 50W / Degrees Celsius
View full details

Questions & Answers

Have a Question?

Ask a Question

  • Can this be used with Glycol to cool to -3�?

    Glycol can be problematic used in chillers unless the chiller is made specifically for glycol. Glycol can become more corrosive over time and cause damage to various parts of the chiller, including the pump. If you frequently change the fluid, you may be safe, but you will want to monitor the condition of the pump and other parts of the chiller. A concentration of 30% glycol and purified deionized water with a pH level between 7.0 and 8.2 will be a good mixture that may prevent corrosion over a period of 2 to 3 months.