You want an ARM microcontroller kit that will have the components to get you deep into circuits that take advantage of many of the STM32 feature set. Consider this microcontroller kit based around the STM32F0 series. This kit includes everything you will need to accomplish almost any ARM microcontroller circuit and development project. Our advanced kit is composed of the components for the serious developer and includes a variety of passive components, sensors, communication components and the STM32F0 series ARM microcontroller on a breakout board to ease the development process. The ARM development board uses the included three breadboards to enable the STM32 microcontroller to have two tie strips for every pin!! That will give you nine total connections for each pin where four positions is on one tie strip and five on the other. The kit includes the following components:
STM32F030 Microcontroller and breakout board
ST-LinkV2 Programmer
Cable to connect the ST-LinkV2
(3) Breadboards
Ultrasonic Range Finder
ADXL345 3 Axis Accelerometer
16x2 LCD Character Display Module
20x4 LCD Character Display Module
(3) 10k Trimmer Potentiometer
50k Potentiometer
5V Low Dropout Regulator MAX603
3V Low Dropout Regulator MAX604
Quad Buffer Line Driver
16 MHz Crystal
18.432 MHz Crystal
FTDI USB to Serial Converter with Cable (Great for USART development)
5V 1.5A Voltage Regulator
(2) 22pF 200V Capacitor (mainly for use with the crystals)
40 Pin Male Header
Resistors: (4) 1k, (4) 10k, and (20) 330 ohm
(4) Push Buttons
(12) Green LEDs
(2) Red LEDs
Solid Core Jumper Set with 140 total hookup wires of different lengths and colors
