Cool your "Water Cooled" spindle for your CNC Router or CNC Machine with this compact kit of pump, water reservoir, fan, radiator, G1/4 fittings and silicone tubing.

This is a 4 pin threaded connector also a replacement for typical spindles used in CNC routers and CNC machines but can be used in many other applications.

This is a 4 pin threaded connector also a replacement for typical spindles used in CNC routers and CNC machines but can be used in many other applications.

This is a 4 pin replacement connector that is found on the back of typical spindles.

This is a 4 pin replacement female spindle connector with a 20mm threaded connection for mechanically securing this connector to the spindle.

Want to solidify your Spindle with an aluminum mount? This is a the way to do it.

This is a 1.5 kilowatt Variable Frequency Drive (VFD or Inverter) that accepts 220v single or three phase. The inverter max frequency is 400Hz . The inverter comes with an instruction manual.

This is a 1.5 kilowatt spindle which roughly translates to 2.01 HP. The spindle is water cooled which requires a pump and tubing. We are using a 300 gal/hr pump that can be purchased from the home improvement store submerged in a bucket of water, but a chiller can also be used. Do not attempt to wire your VFD or spindle on your own. Consult with a professional electrician before following the diagram.

This is a 1.5 kilowatt spindle which roughly translates to 2.01 HP. The spindle comes with the inverter (Variable Frequency Drive) that accepts 110v or 220v depending on the option selected.

This is a 2.2 kilowatt Variable Frequency Drive (VFD or Inverter). The inverter max frequency is 400Hz . The inverter comes with an instruction manual. Note: connecting the inverter to mains power will require wiring of the plug to the inverter. We recommend seeking a licensed electrician for this part of the wiring.

Order the 2.2kW Water Cooled Spindle for more efficient, quiet CNC routing! Ships from the United States. Warranty & Support available now. High quality stainless steel casing. Speed: 0-24000 R/min.

Order the 2.2kW Water Cooled Spindle and Inverter Combo for more efficient, quieter CNC routing. Ships from USA. Warranty and Support available. Do not attempt to wire your VFD or spindle on your own. Consult with a professional electrician before following the diagram.

This is the fitting for your water cooled spindle.

This collet will accept tools with a 3/8" (9.525mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of less than 0.01 mm, or 0.0004 inches.

This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spindles with the ER-11 specification. This collet will accept tools with a 4mm shank.

This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spindles with the ER-11 specification. This collet will accept tools with a 6mm shank.

This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spindles with the ER-11 specification. This collet will accept tools with a 1/4" (6.35mm) shank.

This is the part of the spindle that will hold and grip the end mill at the spinning part of the spindle. This is a collet for smaller spindles with the ER-11 specification. This collet will accept tools with a 1/8" (3.175 mm) shank.

This collet will accept tools with a 1/2" (12.7mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of less than 0.01 mm, or 0.0004 inches.

This collet will accept tools with a 1/4" (6.35mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of less than 0.01 mm, or 0.0004 inches.

This collet will accept tools with a 1/8" (3.175mm) shank. This is a clamping precision grade collet with a TIR (Total Indicated runout) of less than 0.01 mm, or 0.0004 inches.