Tech Video Clips
Breadboarding: Connecting a Relay to the Microc...
The pin of the microcontroller is connected to a transistor that will switch on the current that will fire the coil of the relay so the relay can switch on....
Breadboarding: Connecting a Relay to the Microc...
The pin of the microcontroller is connected to a transistor that will switch on the current that will fire the coil of the relay so the relay can switch on....
Breadboarding: Connecting a Push Button Switch ...
The push button switch is connected to the first pin of the microcontroller (PORTB Pin 0) and the other end of the button is connected to ground since the pin...
Breadboarding: Connecting a Push Button Switch ...
The push button switch is connected to the first pin of the microcontroller (PORTB Pin 0) and the other end of the button is connected to ground since the pin...
Breadboarding: Connecting a Pressure Sensor to ...
To have the microcontroller read a pressure sensor, the sensor is connected to the ADC (Analog to Digital Converter). In this case, the sensor is connected to the pin 0...
Breadboarding: Connecting a Pressure Sensor to ...
To have the microcontroller read a pressure sensor, the sensor is connected to the ADC (Analog to Digital Converter). In this case, the sensor is connected to the pin 0...
Breadboarding: Connecting an LED and Resistor t...
The LED is connected to the microcontroller on the second pin (PORTB Pin 1) in series with the 330 ohm resistor the limit the current through the LED
Breadboarding: Connecting an LED and Resistor t...
The LED is connected to the microcontroller on the second pin (PORTB Pin 1) in series with the 330 ohm resistor the limit the current through the LED
Breadboarding: Connecting an LED and Resistor t...
The LED is connected to the microcontroller on the first pin (PORTB Pin 0) in series with the 330 ohm resistor the limit the current through the LED
Breadboarding: Connecting an LED and Resistor t...
The LED is connected to the microcontroller on the first pin (PORTB Pin 0) in series with the 330 ohm resistor the limit the current through the LED
Breadboarding: Connecting an LED and Resistor t...
An LED is connected to PORD Pin 0 of an AVR microcontroller. In this case, the LED is used to represent a motor that will turn on and off according...
Breadboarding: Connecting an LED and Resistor t...
An LED is connected to PORD Pin 0 of an AVR microcontroller. In this case, the LED is used to represent a motor that will turn on and off according...