[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 13531

Question: WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?

Current Solution

The blacktooth ships in 3 boxes.

Structure 38x22x5 #54

Components 14x13x13 #30

Laser Tube 35x7x6 #4

Respond:

Other Possible Solutions to this Question

  • WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

    76" X 40" X 26"
    230 LBS

    Click the link to respond:
    WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

  • WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

    Shipping crate size 121" X 36" X 92"

    Weight 511 LBS

    Click the link to respond:
    WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

  • what are the specs of the blacktooth laser cutter (dimensions and weight) when assembled?

    The blackTooth envelope dimensions and weight:

    - Length and width: 37" x 34"
    - The height: 11.25"
    - The weight: 70 lbs.

    Click the link to respond:
    what are the specs of the blacktooth laser cutter (dimensions and weight) when assembled?

  • WHAT IS THE SHIPPING WEIGHT AND DIMENSIONS FOR GREENLEAN?

    Shipping crate 121" X 36" X 92"

    Weight 511 LBS

    Additional Information:
    ship in india pls

    Additional Information:
    International shipping rates can be determined by:
    - adding products to the cart
    - go to the cart and enter shipped by address
    - and pressing the calculate shipping button

    Click the link to respond:
    WHAT IS THE SHIPPING WEIGHT AND DIMENSIONS FOR GREENLEAN?

  • What´s the size and weight of the blacktooth shipping box?

    For our blackTooth laser cuter and engraver, the specified packages in shipment may vary to option chosen and additional purchases.

    3 packages:
    40" x 21" x 5"/54 lb.
    17" x 12" x 12"/27 lb.
    40" x 10" x 7"/5 lb.

    Click the link to respond:
    What´s the size and weight of the blacktooth shipping box?

  • WHAT IS SHIPPING DIMENSIONS AND WEIGHT FOR THE VERTICAL LASER.

    Shipping crate size 121" X 36" X 92"

    Weight 511 LBS

    Click the link to respond:
    WHAT IS SHIPPING DIMENSIONS AND WEIGHT FOR THE VERTICAL LASER.

  • WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

  • What are the physical dimensions of the 2.2kw VFD?

    On Monday, when I get back into the office, I will provide the dimensions for the 2.2kW spindle and I will also provide a drawing of these dimensions on the spindle 2.2kW page. Thanks.

    Additional Information:
    Spindle dimensional specifications:

    - Overall diameter is 80mm
    - The length of the outer housing is 200 mm
    - Diameter of the extension just below the spindle is 36mm and the length is 12mm
    - The Collet shaft diameter is 11.318 and the collet nut diameter is 16.75mm and both extend from the extension approximately 52.5 mm
    - The overall length is 264.5mm not including the air ports and the electrical connector (outer housing 200mm + extension 12mm + collet shaft and nut 52.5 mm).
    - The air ports extend 20 mm from the top of the spindle

    Click the link to respond:
    What are the physical dimensions of the 2.2kw VFD?

  • What are the overall dimensions for a greenbull 5x10

    The overall size (Foot Print(Roughly)) is:
    W: 90" x L: 142.5" x H: 35"

    Height:
    Is from table top to highest point and not from the floor to highest point.(H for the 5X/6X can vary in size due to the height of the table/frame, since it can be adjusted to the specific needs of the customer)).

    Additional Information:

    Click the link to respond:
    What are the overall dimensions for a greenbull 5x10

  • What are the overall dimensions of the black toe 2x4?

    The overall foot print of the blackToe 2' x 4', from farthest point to point are:
    Gantry only (kit):
    W: 37"-1/2"
    L: 18"
    H: 35"

    Gantry (kit) with the optional table (add-on):
    W: 37"-1/2"
    L: 36"
    H: 60"

    Click the link to respond:
    What are the overall dimensions of the black toe 2x4?

  • What are the dimensions of the 24v 8.3A power supply?

    The dimensions for our power supplies will be the same.

    Dimensions:
    L: 8.5" / 215.9mm
    W: 4.5" / 114.3mm
    H: 2" / 50.8mm

    Click the link to respond:
    What are the dimensions of the 24v 8.3A power supply?

  • What are the overall dimensions of the GreenLean Machine?

    The overall dimensions of the GreenLean Machine are approximately 86 inches Tall by 116 inches wide.

    Click the link to respond:
    What are the overall dimensions of the GreenLean Machine?

  • WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

    If you take the standard parallel cable BoB (Break Out Board), then you will need control software (Mach 3 or EMC2) and CAM software to make your G-Code (such as CamBam). Personally I use CamBam and Mach 3, they work beautifully but don't expect to turn them on and know how they work out of the box. Give yourself a few weeks to get familiar with the basics. CamBam is VERY powerful software for it's price. I'm surprised how much I keep learning on what I can do with it...I highly recommend it if you want as much control as possible.

    Mach 3 + CamBam as a bundle costs $310. EMC2 will give you a free replacement for Mach 3 and is exclusively for Linux.

    If you use the USB BoB, it will cost an extra $75 + $75 for the software. This is an all-in-one package so no need for Mach 3 or CamBam.

    For etching rasters (jpeg, bmp, tiff, non-vectors, photos), I highly recommend PicEngrave. It has been a labor of love for the past 9 years and John has done a wonderful job with it. It easily compares in quality compared to software that is in the $200-$300 range. John's software runs $40 and can be found here: http://picengrave.com/ (don't let the modest website fool you, this stuff can do amazing things). DotG and the Mach3 engrave plugin are two other options and instructions can be found on Dustans page in the gallery on buildyourcnc.com website.

    Click the link to respond:
    WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

  • WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

    I would say mechanically, between the official build instructions, Warren's awesome blog (http://blacktoothlaser.blogspot.com/) and the tips in the forum, the blackTooth is a really simple build. The challenges come with electronics and software. There's a number of different ways to drive the laser and motors. A decent understanding of electronics and computers is a must.

    Click the link to respond:
    WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

  • What are the outside dimensions of the Laser Mirror Mounts?

    The outside dimensions for the laser mirror mounts found here:
    https://www.buildyourcnc.com/item/Laser-Component-Mirror-Mount-20mm
    and here:
    https://www.buildyourcnc.com/item/Laser-Component-Mirror-Mount-20mm

    Are 55.88mm (2.2") x 55.88mm x 44.5mm (1.76") thick. This includes the set screws that protrude on the back and the mirror holder that protrudes on the front. Not including the protrusions, the thickness is 22.23mm (0.875")

    Click the link to respond:
    What are the outside dimensions of the Laser Mirror Mounts?

  • what are the table dimensions for 4' by 8' heavy duty greenbull?

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    what are the table dimensions for 4' by 8' heavy duty greenbull?

  • What are the table dimensions for the greenBull so I can build it.

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to respond:
    What are the table dimensions for the greenBull so I can build it.

  • WHAT ARE THE BLACKTOOTH LENS SIZES AND FOCAL LENGTH SPECIFICATIONS?

    The lens is 20mm wide and a 50.6mm focal length (the one included). This lens will stand up to at least 30PSI air assist.

    The mirrors are 25mm wide mirrors.

    Focal length is the distance from the lens to the material for the laser converge into the best focal point. If a lens is listed as 2". You measure 2" from the lens to the material, this will be the tightest point the laser can go before it starts to re-expand again losing focus.

    Click the link to respond:
    WHAT ARE THE BLACKTOOTH LENS SIZES AND FOCAL LENGTH SPECIFICATIONS?

  • What are the mounting hole dimensions of the 1/2" Anti-Backlash Lead Nut

    The mounting hole dimension for the 1/2" 10 TPI 5 starts antibacklash nut is 1.13" or 28.7 mm. I added a drawing to the antibacklash nut product webpage so you can see other dimensions.

    Antibacklash nut product webpage: https://www.buildyourcnc.com/item/mechanical-leadscrews-antibacklash-nut-!5-5-starts-10-tpi

    Thanks

    Additional Information:
    You can also see the drawing directly here: https://www.buildyourcnc.com/images/Antibacklash_nut_1_2_drawing-800.JPG

    Click the link to respond:
    What are the mounting hole dimensions of the 1/2" Anti-Backlash Lead Nut

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.