The blackFoot CNC machine kit does not include a table. The table can be made as long or shot as you need. for instance, if you are looking for a travel of 4 fet x 4 feet, then the table will need to be about 6 feet long to get the full 4 feet of travel.

The electronics are very straight forward using the connection diagram for the breakout board that you select. Use the videos for a general idea and then use the connection diagram to verify the correct connections for the interface of your choosing.

Yes,the USB interface replaces the breakout board, but remember that you will need to use the planet-cnc software with the USB interface.

Additional Information:
The electronics does accompany the cnc machine kits as long as you select the option "with electronics". There are option to purchase the machines without electronics and that would be necessary if you either have your own electronics, or you prefer the plug and play cnc computer system we call the redLeaf, or redSprout. This will also be necessary if you prefer the electronics that use the USB interface rather than the parallel interface.

Additional Information:

Click the link to add information to this solution:
WHERE ARE THE ELECTRONICS WIRING VIDEOS?

The electronics and wiring videos are located under the tutorials section (click Tutorials on the top menu. The Title is "CNC Electronics and Wiring". The actual link to these videos is: https://www.buildyourcnc.com/CNCElectronicsandWiring.aspx

Additional Information:
You will also find the electronic wiring videos for the USB controller at: https://www.buildyourcnc.com/tutorials/tutorial-Electronics-USB-Interface-Wiring

Click the link to add information to this solution:
WHERE ARE THE ELECTRONICS WIRING VIDEOS?

Locate the switch as close to where you will normally be as possible and in clear sight.

Click the link to add information to this solution:
WHERE IS GOOD PLACE TO PUT THE E-STOP SWITCH?

Howie D. was in the Backstreet Boys Band.

Click the link to add information to this solution:
WHAT POP GROUP WAS HOWIE D. IN?

Information regarding influenza surveillance is available October through May from the CDC influenza website at www.cdc.gov/flu/weekly/fluactivity.htm.

In addition, periodic updates about influenza are published in the MMWR. State and local health departments should be consulted regarding availability of influenza vaccine, access to vaccination programs, information about state or local influenza activity, and for reporting influenza outbreaks and receiving advice regarding their control.

Click the link to add information to this solution:
WHERE CAN I GET INFORMATION ON INFLUENZA (THE FLU) AND ITS SURVEILLANCE?

You can find the wiring diagrams for the blackTooth on step 105 and 106 on the list of instructions on the blackTooth page. Step 105 pertains to the parallel breakout board and step 106 pertains to the USB interface board.

Additional Information:
wire size

Click the link to add information to this solution:
WHERE ARE THE WIRING DIAGRAMS FOR BLACKTOOTH LASER CUTTER IN INSTRUCTIONS?

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
I PURCHASE BUILD YOUR OWN CNC MACHINE. WHERE CAN DOWNLOAD PDF SO PRINT LARGE

Boxing is the sport Muhammad Ali was the world champion.

Additional Information:
Where was ricky martin born

Additional Information:

Click the link to add information to this solution:
WHAT SPORT WAS MUHAMMAD ALI THE WORLD CHAMPION?

Boxing is the sport Muhammad Ali was the world champion.

Additional Information:
Where was ricky martin born

Additional Information:

Click the link to add information to this solution:
IN WHICH SPORT WAS MUHAMMAD ALI THE WORLD CHAMPION?

If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.

Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?