The mxl 0.08" pitch is fine for moving the weight of a gantry that contains a 40 watt laser tube and optics. I would not advise this timing belt for CNC applications that need to move heavy items such as spindles, routers, and heavier structures that are required to move these spindles and routers around.

The mxl 0.08" pitch timing belt is also great for 3d printers.

Click the link to add information to this solution:
Originally bought the Blacktooth Laser kit, but the upgraded laser tube size and needed a larger casing. With that I need to upgrade the belts to a 36" run. Can you advise whether the mxl.08" timing belt is sufficent or do I need the .2"in.

Yes, we have cut many fabrics with the laser. Or CO2 lasers can generally cut fabrics and textiles without a problem. What types of textiles (materials) do you need to use with the laser machine? Is there a layering of materials?

Additional Information:
We would cut multiple heights of different carpets and even hard surfaces such as Vinyl composition tile, Luxury vinyl tile,etc. and I'm wanting to explore etching into plain color carpets using the laser.
I'm contemplating your 5' x 12' machine with the laser/spindle combo.
Is it possible to make a site visit to your location and see the capabilities of the equipment ?

Additional Information:
Carpets are not a problem as long as there are no materials in the carpet or in the carpet binding layers that will off-gas toxic fumes. Check the manufacturer's materials of all of the parts of the carpet.

The vinyl should not be a problem, just make sure there is no material mixed within the composite that will off-gas harmful fumes such as chloride. The chloride will mix with the hydrogen in the air and form HCL (hydrochloric acid) which can be harmful if inhaled, but can also affect some of the metallic parts in the machine.

We have cut vinyl with the laser with great results.

Click the link to add information to this solution:
I own a custom rug shop where we design a fabricate custom floors of many types, Have you performed any type of testing using your 40 watt and or 80 watt laser for the cutting of thse textiles.

If you are using a router that will not fit into the router mount, it is best to have the mount requested from us. The mounts were designed with the appropriate thickness of material for structural purposes and to maintain this structure under load.

Click the link to add information to this solution:
Can I make the whole for the router larger? This is for a blacktoe and the whole is about 1/4 inch in diameter too small.

The cutting area is 20" x 40" for the book machine. This area is determined by the 2'x4' sheets that make up the bed of the machine. You can increase this area if you use larger sheets and adjust the gantry width by the same difference of the width of the sheets.

You can also use the plans from Woodsmith magazine to build a larger machine.
https://www.woodsmith.com/article/build-a-cnc-router-for-your-own-shop/

Additional Information:
need cutting area of 25 x 49 what size of gantry


Additional Information:
need cutting area of 25 x 49 what size of gantry

Click the link to add information to this solution:
I am building the 24" x 48" machine from the original book and i was wondering if anyone can provide me with the actual cutting area possible with that machine.

We offer a laser/spindle Z-axis attachment for our 4x8 greenBull CNC. The blackFoot 4x8 does not have a large enough gantry to accommodate the 40W laser tube.

Additional Information:


Additional Information:
We do sell the parts to convert your CNC milling machine to a laser, but you will need to develop the mounts that will hold all of the laser parts to the machine, if the machine was design and built by you.

We can offer guidance for this conversion.

The laser parts can be found here:
https://www.buildyourcnc.com/LaserComponents.aspx

Click the link to add information to this solution:
I already built a 4 x 8ft carving machine, I would like to modify for laser cutting wood. Do you sell a conversion kit? I use Mach3 software and steppers. Thanks Ray

As shown in the instructions the laser tube that was used was a different model which had the metal end, compared to our full glass tube models we currently ship with the machines.
So there is no difference besides appearance between the two tubes.
The focus lens should be placed in the laser nozzle assembly and not on the laser tube itself.


Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I bought a blacktooth laser from you about a year ago.. I am finally getting around to installing the laser tube and I noticed that my tube does't have the metal end on it like all the pictures I've seen. is this a focus lense and can I purchase one?

The limitation of our machines lies with the width of our gantry, so extending the blackToe to 2' x 6' will not be a problem. Adding the required aluminum rails and chain is the essentials that we sell on our website(http://www.buildyourcnc.com/CNCMachineMechanicalParts.aspx). The table extension is something we do not offer. Please contact (customerservice@buildyourcnc.com) for custom requests.

Click the link to add information to this solution:
I have a Black Toe CNC with your optional table, and wish to extend the x-axis to 6' of cutting length. Is is as easy as ordering another section of table, longer x-axis chain, and longer x-axis rails? If so, would you sell these items?

The connections between the driver and the breakout board(USB/Parallel)22-24 AWG wire is preference also going from the potentiometer going to LSPS(laser power supply) , now going from the power supply to the drivers/laser power supply 16-18 AWG wire is our preference.

Click the link to add information to this solution:
I'm about to order your laser cutter , item 279 and a little confused.. in your faq it states you need wire and connectors for assembly, can you be specific on amount and guage of wire or tell me where to find that information?

We do have a relay board that words like a standard relay.

Here is the URL of the relay board that we offer:

https://www.buildyourcnc.com/item/electronicsAndMotors-breakout-Relays-relay-board-250V-12A-5V

Click the link to add information to this solution:
I HAVE YOUR MACH3 USB BOB, DO YOU GUYS SELL A TORCH CONTROL RELAY CAN WIRE UP TO TURN MY PLASMA ON AND OFF HOW WOULD WIFE THAT TOO THIS BOB?

Currently our only location is in Katy, Texas at this current time, we can help you assemble the machine and if any issues occur we can always help you with the problems, but will have to be managed through email or phone (which ever is your preference).

Click the link to add information to this solution:
I live in China and my company would like to buy the 40w laser cutting machine. I am wondering if you can help us assemble and maintain the machine in China? Do you have any service point here? Thank you

We do have a relay board that words like a standard relay.

Here is the URL of the relay board that we offer:

https://www.buildyourcnc.com/item/electronicsAndMotors-breakout-Relays-relay-board-250V-12A-5V

Click the link to add information to this solution:
I have your mach3 USB BoB, do you guys sell a torch control relay I can wire up to turn my plasma torch on and off and how I would wife that too this BoB?

Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Additional Information:
Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens, and nozzle. You will also need some mechanical parts and some motors, drivers, and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

The lasing area for the blackTooth v2 is 20" x 24" or 580 x 600 mm.

The dimensions for the machine in general will be on the main product page when the videos are completed.

Thank you for the kind words.

Additional Information:
The lasing area for the blackTooth v2 is 20" x 24" or 580 x 600 mm.

The dimensions for the machine in general will be on the main product page when the videos are completed.

Thank you for the kind words.

Click the link to add information to this solution:
Hi, question about blacktoothv2 laser engraver, what is the cutting area of the laser machine as I don't have clue how big it is, and are you’ll just use it like that ore it’ll have a moving Z axis, waiting for video 5, interested how it will progress. It’ll be very useful if you’d mention some dimensions during the installation. Thanks and keep up good work

The lasing area for the blackTooth v2 is 20" x 24" or 580 x 600 mm.

The dimensions for the machine in general will be on the main product page when the videos are completed.

Thank you for the kind words.

Click the link to add information to this solution:
Hi, question about blacktoothv2 laser engraver, what is the cutting area of the laser machine as I don't have clue how big it is, and are you’ll just use it like that ore it’ll have a moving Z axis, waiting for video 5, interested how it will progress. It’ll be very useful if you’d mention some dimensions during the installation. Thanks and keep up good work

Mach3 and Mach4 typically use specific controller cards that are compatible with the software. If your controller connects to your computer using either a USB or Ethernet connection, then you will probably need to change the controller card as well, unless your controller card contains a plug-in that works with the Mach3 or Mach4 software.

Click the link to add information to this solution:
I have cnc fiber laser cutting machines it has operating software cypcut and I need to change it to Mech 3 or 4 do I have to buy the driver card with the software or only the software?

Most motherboard do contain parallel ports, but the port connector may not be at the back (in the section where external connectors will be connected). Instead, the motherboard may contain an LPT ribbon connector on the actual face of the motherboard (usually along one of the edges). You will need a ribbon connector to a DB25 female connector.

If your motherboard does not contain an LPT header on the motherboard, you can purchase a parallel printer adapter that plugs into one of the PCI slots. The price of the adapter is very inexpensive and sometimes is actually less costly than the actual ribbon connector.

Click the link to add information to this solution:
As I am building my 20" x 24" laser engraver cutter, I notice that there is no parallel port on the onboard computer and I have the parallel breakout board any answers?

What material is the 0.1mm and 0.2mm board?

Additional Information:
Steel sheet


Additional Information:
Steel Sheet

Additional Information:
Thanks for the response. CO2 lasers unfortunately cannot cut metallic materials. Metals are best cut with other types of lasers, or by using oxygen assist. The oxygen assist method is not encourages as the combination or CO2 laser and oxygen is very volatile.

Additional Information:
and I can not do this laser to cut the steel plate, but instead of the CO2 tube I put the oxygen tube, or do not I know ?! Do I have a chance in the products on the site to create a laser for 0.1mm and 0.2mm steel sheets?

Additional Information:
I can help with an answer, Thanks!

Additional Information:
I can help with an answer, Thanks!

Additional Information:
Can you help me with an answer? Thank you! **

Click the link to add information to this solution:
If I build a Laser with the components on this site, can I cut the 0.1mm and 0.2mm board? Is it cut in optimal conditions, or if not what you recommend ?!

Our hold down method is screws. For a 4'x8' 3/4" sheet, we use 6 screws around the perimeter of the sheet. This provides sufficient hold down for milling. For the vertically oriented machine, the sheet also rests on a small ledge, making it easy for the board to maintain position while fastening.

Click the link to add information to this solution:
Can the vertical CNC router do about what a horizontal router can, like cutting out 3/4" cabinet doors from a 4'X8' formica clad sheet? If so, how do you hold it - with Vacuum? Is a vacuum system available?