[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 14411

Question: What is the flange diameter, and the flat to flat dimension on the spring loaded 1/2-10 lead screw nut?

Current Solution

Hi, the dimension flange thickness for the 1/2" 5 start 10 TPI antibacklash nut is 0.27 inches or 6.858 mm. The flange diameter is 1.5 inches or 38.1 mm. The flange has two flats that measure 1 inch or 25.4 mm from flat to flat.

The drawing can be seen here:
https://www.buildyourcnc.com/images/Antibacklash_nut_1_2_drawing-800.JPG

Or you can click on the drawing image on the product page:
https://www.buildyourcnc.com/item/mechanical-leadscrews-antibacklash-nut-!5-5-starts-10-tpi

Respond:

Other Possible Solutions to this Question