If you received fewer parts than is called for in the instructions, we will send the proper parts to you. Please call us to have these parts sent to you.

Click the link to add information to this solution:
I ordered the blacktooth laser cutter, there were only 4 red spade terminals, but the instructions pictures show that there should be more and would include blue spade terminals

As shown in the instructions the laser tube that was used was a different model which had the metal end, compared to our full glass tube models we currently ship with the machines.
So there is no difference besides appearance between the two tubes.
The focus lens should be placed in the laser nozzle assembly and not on the laser tube itself.


Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I bought a blacktooth laser from you about a year ago.. I am finally getting around to installing the laser tube and I noticed that my tube does't have the metal end on it like all the pictures I've seen. is this a focus lense and can I purchase one?

Hello, I was wondering if the Blactooth laser cutter can engrave in 3d, different depths in the same piece of wood?

Additional Information:

Click the link to add information to this solution:
I was wondering what the max depth is for something to go into the 40W C02 Laser cutter and engraver with blacktooth

Yes, if you need a replacement part on your machine please call us at 281-815-7701.

Click the link to add information to this solution:
I have a blacktooth laser engraver. The Y Axis stepper motor needs to be replaced. Can you please provide me with the information I would need to replace this motor.

We have the image at that size to encourage the purchase of the kit from us. This helps to keep buildyourcnc alive and allows us to fund development of other awesome low cost machines.

Click the link to add information to this solution:
could you make available a larger size picture of the exploded view of the BlackTooth laser cutter? I would like to use for reference when building my laser cutter, but it is too small to be really useful.

We have one in the works. It is a 4'x8' machine that will house the 80w laser tube on the gantry. The machine is bout 2 months out as of 1/7/2014.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Do you have a larger kit for the Blacktooth Laser? I need a laser with at least 80watts of power.

Exhausting the blackTooth laser cutter is a very important consideration and should be taken seriously, especially if you are cutting materials that give off toxic fumes when the material is burned. You will want a 4 inch hose to connect from the blackTooth to a blower, and another 4 inch hose to connect from the blower to the outside. The blower should be sufficient to provide completely negative pressure within the laser enclosure so there will be no escape of gasses.

The connections at the machine, at the blower and at the location the hose exhausts outside should be thoroughly checked for leaks. Use a gasket, or silicone. Once complete, try cutting a non-toxic material that will give off an odor (wood, or non-toxic plastic) and try the system and determine if the smell is present.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I have been asked to provide an exhaust for the Blacktooth Laser Cutter CO2 40W. I see no specifications or guidelines for exhausting fumes from the machine. Can someone help me?

To verify, you are still getting the laser tube to fire, but the laser beam is weak and cannot cut or engrave any materials correct?

Have you checked your tube's tungsten post terminals to make sure they are getting good contact?
The Laser tube and laser power supply both have manufacture warranty, please email customerservice@buildyourcnc.com for further assistance.

Click the link to add information to this solution:
Hello, I have a blacktooth laser cutter, the machine has 10hrs of work, suddenly in the middle of a job the laser beam lost all power, I can still se the purple plasma beam but with no power or intensity, the tube is fine, water is running through and there is no arcing to the chasis or some other part. I think it might be a faulty PS how can I test it, Do I have a warranty on it?

Most motherboard do contain parallel ports, but the port connector may not be at the back (in the section where external connectors will be connected). Instead, the motherboard may contain an LPT ribbon connector on the actual face of the motherboard (usually along one of the edges). You will need a ribbon connector to a DB25 female connector.

If your motherboard does not contain an LPT header on the motherboard, you can purchase a parallel printer adapter that plugs into one of the PCI slots. The price of the adapter is very inexpensive and sometimes is actually less costly than the actual ribbon connector.

Click the link to add information to this solution:
As I am building my 20" x 24" laser engraver cutter, I notice that there is no parallel port on the onboard computer and I have the parallel breakout board any answers?

The blackTooth's 40 watt laser tube can be cooled with simple tap water. A bit of anti-freeze keeps the tap water clean and free of algae. The cooler the water, the better output you will get from the laser. A great source of information can be found here: http://www.buildyourtools.com/phpBB3/viewtopic.php?f=8&t=3452

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
What kind of cooling system should we set up for the Blacktooth laser cutter laser tube? Can tap water be used? Is water temperature critical?

A standard 40W CO2 laser will cut up to 1/4" thick of material, be it wood, acrylic, card stock, leather, fabric, foam, cork, etc. (Decent speed and final cut are heavily dependent on a strong air assist upgrade)

Metals cannot be cut due to the power level and wavelength of the CO2 laser. But it can be marked with special solutions like Cermark or Thermark.

Click the link to add information to this solution:
WHAT THICKNESS OF MATERIAL CAN THE BLACKTOOTH LASER CUT?

Depth of Field. This is how far the focal point goes before re-expanding again. With a 2" lens, you have approximately 2-3mm of DOF. This means that you'll have 2-3mm of perfectly focused laser before it starts to re-expand again. If you have a 4" lens, you will have up to 7mm of DOF.

Additional Information:

Click the link to add information to this solution:
WHAT IS D.O.F OR DEPTH OF FIELD FOR THE BLACKTOOTH LASER AND LENS?

For our machines our steps for the build process can be found on the actual machine page with images to reference (please read carefully all the instructions) (https://www.buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx).
You can get further help here (http://blacktoothlaser.blogspot.ca/2013/04/index-for-blacktooth-laser.html?view=sidebar) a post made by one of our customers!

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
where is the build manual for the blacktooth laser? online? I didnt get one with my machine

You can use our shopping cart to determine the shipping. Add the machine and the parts you want to purchase, enter your shipping address and click on the Calculate Shipping Button to get a price for shipping. The shipping charges are determined directly from the carriers at the time of pressing that button.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Hi, I live in Australia and am looking at purchasing the Blacktooth laser cutter and engraver. I am wondering what the cost to ship to Australia would be?

There is some variation in the outward appearance of laser power supplies due to sourcing through different vendors. However, the basic wiring requirements are the same in each case. For the unit with integrated laser controller, follow the diagram found here: https://buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx#prettyPhoto/0/. The terminals on the signal side will have a 6 connection terminal block -- these are the ones labeled 5V, IN, G, P (or WP), L (or TTL-L), and H (or TTL-H). The High Power side will have 3 inputs for AC power, one high voltage lead, and one return line. Connect these as shown in the diagram as well: the return line goes on the "front" (beam exit end) terminal of the laser tube, the high voltage lead goes to the "back" terminal of the tube, the FG terminal (or G) receives the earth ground wire of the AC power cable, and the two AC terminals receive the line and neutral wires of the AC power cable (it doesn't matter in this case which wire goes to which terminal).

Click the link to add information to this solution:
I purchased the blackTooth Laser Engraver with integrated Laser Control Unit and have been following your instructions. I noticed that the laser tube power supply is different that what is shown in your instructions. Do you have any better wiring guides that I can follow for the version that I received?

For all of our kits, it is highly recommended that the instructions are completed read. This will determine if the customer has the ability to take on a project of this complexity.

Depending on the specific blackTooth option purchased, the kits include the following (if the parts is listed in the instructions, it is included in the kit unless otherwise specified within the price option):

- Structural components: Plexiglas panels and MDO structural parts that form the overall machine.
- All of the hardware necessary to assembly the structural components and to fasten the electronics and laser components.
- The electronic components to move and power the machine including power supplies, motors, drivers, interface and computer components if that option was purchased.
- Laser components including laser tube, mirrors, lens, nozzle, air pump and mounts.
- Mechanical components including drive pulleys, bearings, rails, and timing belts.

Click the link to add information to this solution:
I cant find a list or description of what the kits actually contain.. Pictures would be nice befor I spend 2 grand "The BlackTooth will be provided in kit form" is a bit limited.. Thank you

The mxl 0.08" pitch is fine for moving the weight of a gantry that contains a 40 watt laser tube and optics. I would not advise this timing belt for CNC applications that need to move heavy items such as spindles, routers, and heavier structures that are required to move these spindles and routers around.

The mxl 0.08" pitch timing belt is also great for 3d printers.

Click the link to add information to this solution:
Originally bought the Blacktooth Laser kit, but the upgraded laser tube size and needed a larger casing. With that I need to upgrade the belts to a 36" run. Can you advise whether the mxl.08" timing belt is sufficent or do I need the .2"in.

Temperature probe monitor. Very valuable. This keeps you up to date on your coolant temperature levels.

Voltage meter. This will tell you the exact level of voltage/power you are running telling the laser to run at instead of an arbitrary mark on a drawn wheel around your POT.

Ammeter sensitive to 1mA. This will be sure your not over driving your tube and reducing it's life significantly.

Hour meter. This will tell you exactly how long your system has been 'on' giving you a more accurate bead on the length of your tubes life.

Exhaust fan upgrade. The current fan included is 100CFM. You can buy 120mm fans that push 250CFM and I have included a guide on how to go about doing this here. http://buildyourtools.com/phpBB3/viewto ... 8cdd1802bf

To push the exhaust fan even further, if you have the room/power, I would highly recommend investing in a 600+ CFM "Dust Collector" system. 250CFM is still not suffice to draw all the smoke that can come off of 3mm or 1/8 MDF cutting job.

A cutting surface. I bought myself a aluminum 'egg crate' mesh from my local HVAC company. They are used a cover for fluorescent lights and work great for low impact cutting surface. They come in 4'x8' sheets and are easily cut to fit. The other side is if you can find a steel honeycomb cutting bed to fit. These can be quite costly or fairly affordable depending where you are looking. The benefit of a steel honeycomb is you can use high power magnets to hold material down.

Click the link to add information to this solution:
WHAT ARE SOME USEFUL MODIFICATIONS CAN APPLY TO THE BLACKTOOTH LASER CUTTER?

A cutting surface. I bought myself a aluminum 'egg crate' mesh from my local HVAC company. They are used a cover for fluorescent lights and work great for low impact cutting surface. They come in 4'x8' sheets and are easily cut to fit. The other side is if you can find a steel honeycomb cutting bed to fit. These can be quite costly or fairly affordable depending where you are looking. The benefit of a steel honeycomb is you can use high power magnets to hold material down.

Click the link to add information to this solution:
WHAT CAN USE BELOW MY WORKPIECE AS SUBSTRATE IN BLACKTOOTH LASER CUTTER?