BuildYourCNC - PoStep60-256 Stepper Driver

Price Options Your Cart

PoStep60-256 Stepper Driver

$64.99

Includes free technical support.

The PoStep60-256 is a stepper motor driver with 6.0 Amps Phase Current

up to 6.0 Amps Phase Current

Simple current, microstep and other settings with software via USB

Compatible with 4, 6, and 8 wire stepper motors of any voltage

+10 VDC to +50 VDC Power Supply

1, 2, 4, 8, 16, 32, 64, 128 and 256 Micro-steps per Step

Mixed decay mode for smoother moving of motors

3,3V and 5V logic compatible isolated inputs

250 KHz Max Step Rate

0 °C To 70 °C Operating Temperature

LED Power, VM, Status, Fault and Stal indicator

On board temperature sensor

Improved thermal managing

It can be driven from USB without controller

Small Size: 54 mm X 75 mm

Click on the question to reveal the answer.

[PoStep60-256 Stepper Driver] When clicking the manual link, it wont let me switch to the American version. How do I get that link?

If you are referring to the polabs website that presents in another language, on that site, there is a button on the top right that says "options" with a down arrow. Click that and click turn off translation.
Click the link to add information to this solution:
[659] When clicking the manual link, it wont let me switch to the American version. How do I get that link?

Related Tutorials

Step 23: Driver Part 4
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The driver is almost to a completion! We have installed all of the tiny components. Now to the big components. This is the logical process of putting together any circuit kit. The small components are difficult to insert if the larger components are installed already. Believe me, I've tried. Especially if there are jumper wires or resistors needed underneath chips and sockets.

Step 20: Stepper Driver Part 1 - Resistors
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. Well... here we are, finally getting started with the electronics portion of the video series. The entire structure of the CNC machine is complete with the exception of the router mount. We will get to that a little later. For now, we will start on the assembly of the HobbyCNC 3 axis chopper unipolar stepper driver.

3 and 4 Axis Stepper Motor Driver Board Based on the Allegro Chip
So, what exactly is a 3 and 4 axis stepping motor driver board. Actually, I am presenting the 3 axis stepping motor driver board in this article, but there is another much smaller board that will connect to this one that will provide an additional driver, making it useful for those wonderful 3D projects that use an indexer.