[ Log In ]
[ Register ]

Question #: 115

Question: What is your favorite music?

Current Solution

The brain likes to hear Drumm and Bass (DnB).

Respond:

Other Possible Solutions to this Question

  • what is buildyourcnc email address

    You can contact us using the email address mailto: customerservice@buildyourcnc.com

    This "customer service live" option to contact us is recommended because it benefits all of our users and builds the response database so that questions can be answered more accurately over time.

    Click the link to respond:
    what is buildyourcnc email address

  • WHAT IS THE WARRANTY ON YOUR PRODUCTS

    We provide a one year warranty from the date the item is delivered.

    Click the link to respond:
    WHAT IS THE WARRANTY ON YOUR PRODUCTS

  • what is your name?

    My name is "The Brain!!"

    Click the link to respond:
    what is your name?

  • What is your largest format cnc router

    The largest CNC machine we make at this time (12/04/2015) is the GreenBull 6'x12' model. This model has 2 options for Z-axis travel.

    The short-z option has a total Z travel of 5.75 inches. From that you would subtract the length of the end mill used and the thickness of the spoil board to determine the maximum material thickness. (Example: If the end mill extends 1.25" from the collet and the spoil board is .75", then the material could be up to 5.75 - 1.25 - 0.75 = 3.75 inches in thickness). This is good for most sheet-type materials.

    The long-z option, used mainly for large 3D carvings, requires a custom frame and allows for up to 36" of travel.

    Click the link to respond:
    What is your largest format cnc router

  • What is the width of your strip brushes?

    The strip brush is .2 inches (5.23 mm) wide, so a slot of that width or slightly wider will work. We use a .25 inch groove and use glue to adhere the strip brushes in our dust shoe.

    The material of the bristles and the strip that holds the bristles are nylon.

    Click the link to respond:
    What is the width of your strip brushes?

  • What is the warranty on your 2.2KW spindle

    We honor a one year warranty on most parts like main machine components, structural parts, mechanical parts and some electronic parts including spindles.

    Click the link to respond:
    What is the warranty on your 2.2KW spindle

  • What Is Your Service Any County Any Products

    We provide a one year warranty from the date the item is delivered.

    Click the link to respond:
    What Is Your Service Any County Any Products

  • What is the tolerance on your 1/2" acme thread?

    The tolerance of our 1/2" 5 start lead screw is +/-0.05mm

    Click the link to respond:
    What is the tolerance on your 1/2" acme thread?

  • WHAT SIZE COLLET IS IN YOUR 1.5 KILOWATT SPINDLE?

    The collet in the 1.5 kW spindle is an ER-11 and cannot reach the 1/2" size. I would consider the 2.2 kW spindle instead.

    Click the link to respond:
    WHAT SIZE COLLET IS IN YOUR 1.5 KILOWATT SPINDLE?

  • What is the z-axis travel for your largest machine?

    The largest CNC machine we make at this time (12/04/2015) is the GreenBull 6'x12' model. This model has 2 options for Z-axis travel.

    The short-z option has a total Z travel of 5.75 inches. From that you would subtract the length of the end mill used and the thickness of the spoil board to determine the maximum material thickness. (Example: If the end mill extends 1.25" from the collet and the spoil board is .75", then the material could be up to 5.75 - 1.25 - 0.75 = 3.75 inches in thickness). This is good for most sheet-type materials.

    The long-z option, used mainly for large 3D carvings, requires a custom frame and allows for up to 36" of travel.

    Click the link to respond:
    What is the z-axis travel for your largest machine?

  • What is the wavelength coming from your laser tubes?

    The CO2 laser tubes that we sell have an output light wavelength of 10500 nm (nanometer). Our goggles provide protection for this wavelength of light.

    Click the link to respond:
    What is the wavelength coming from your laser tubes?

  • What is the maximum runout on your water-cooled spindles?

    TIR specifications for the ER-20 collet used on 2.2KW Spindles is .0004 inches.

    Click the link to respond:
    What is the maximum runout on your water-cooled spindles?

  • DO NEED LIMIT SWITCHES, IF SO WHAT IS YOUR RECOMMENDATION?

    Limit switches are not really needed for this level of a machine, but if you do want to use them, then you will need to connect them with shielded cable and ground the shield at both ends and any other non-used wire in the cable. Limit switches are very susceptible to the motor interference. You will also need to adjust the debounce in the software you will use.

    Click the link to respond:
    DO NEED LIMIT SWITCHES, IF SO WHAT IS YOUR RECOMMENDATION?

  • What is the price for your laser kit, to be shipped assembled

    For a custom quote on an assembled blacktooth, please contact sales@buildyourcnc.com

    Click the link to respond:
    What is the price for your laser kit, to be shipped assembled

  • WHAT DOES YOUR HEART PUMP?

    Your heart pumps blood.

    Click the link to respond:
    WHAT DOES YOUR HEART PUMP?

  • What is the dimensions and material of the spine on your Strip brushes?

    The strip brush is .2 inches (5.23 mm) wide, so a slot of that width or slightly wider will work. We use a .25 inch groove and use glue to adhere the strip brushes in our dust shoe.

    The material of the bristles and the strip that holds the bristles are nylon.

    Click the link to respond:
    What is the dimensions and material of the spine on your Strip brushes?

  • wHAT IS THE SMALLEST LENGTH SHAFT I CAN USE FOR YOUR #25 DRIVE SPROCET?

    The hub length of the drive sprocket and the other mechanical devise that is used to connect on the shaft will determine the length of the shaft needed for use with the drive sprocket.

    The hub lengths for our drive sprockets are 1/2". So if you are connecting the drive sprocket to a motor, your motor shaft will need to be at least 1/2" in length.

    Click the link to respond:
    wHAT IS THE SMALLEST LENGTH SHAFT I CAN USE FOR YOUR #25 DRIVE SPROCET?

  • What are the tolerances of your machines?

    The tolerance of our machines, like any machine, depends on several variables. The major variables include the manufacturing tolerance, the type of machine control used, the precision of assembly, the thoroughness of maintenance, and the initial and ongoing calibration of the machine. Because we sell kits only most of these variables are outside our control. Therefore, we are hesitant to guarantee a certain level of tolerance for an end user. However, in our experience, tolerances of .001" are readily achievable with our machines.

    Additional Information:
    What is the likely tolerance one could achieve without continual frustration and months of tinkering?

    Additional Information:
    We actually do very little tinkering with our production machine. The wood has a very small coefficient of linear expansion as compared to metals and plastic, so calibration is reduced to a very infrequent state.

    As with all machines, the determination of backlash in all parts of the machine is important, managing the tightening of these points of adjustment is necessary, but are still done infrequently.

    Click the link to respond:
    What are the tolerances of your machines?

  • What size collet comes with your spindles?

    All of our spindles come standard with a 1/4" collet. The 2.2kw, and 4.0kw, can be upgraded to a 1/2" collet with a separate purchase.

    Click the link to respond:
    What size collet comes with your spindles?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.