[ Log In ]
[ Register ]

Question #: 13442

Question: What are the dimensions of the VLXL cabinet? With space saving lauded as a feature, a critical bit of information.

Current Solution

The overall dimensions of the machine when mounted to a wall will be 119" from side to side and 25-1/2" inches out (from the wall to the longest part which is the bottom). Height of the machine (clearance) is about 76" maximum.

Respond:

Other Possible Solutions to this Question

  • What are the bolt dimensions for the SBR20 linear rails, can they work with 8020 Aluminum extrusions?

    Our SBR20 rails use M8 bolts and are suitable for use with 8020 aluminum or any other common machine material. We suggest the use of our ball bearing pillow blocks with these rails, which you can find on our website here: https://buildyourcnc.com/item/mechanical-rails-linear-ball-bearing-block

    Additional Information:
    HOW TO FIND WIDH 38 HEIGHT 26 LINER GUIDE RAIL

    Click the link to add information to this solution:
    What are the bolt dimensions for the SBR20 linear rails, can they work with 8020 Aluminum extrusions?

  • What are the overall dimensions of the 2.5A small stepper drivers? Is there a CAD model available?

    The overall dimensions of our 2.5 modular stepper divers is:

    L: 1.875"/ 47.625mm
    W: 1.433"/ 36.3982mm
    H: .585"/ 14.859mm (height might change due to different terminal block height (other we have on hand is .464"/ 11.7856mm))

    Currently we do not have a CAD model on hand.

    Click the link to add information to this solution:
    What are the overall dimensions of the 2.5A small stepper drivers? Is there a CAD model available?

  • What are the overall dimensions of the USB interface board? Is there a CAD model available?

    The dimensions for our USB breakout board are:

    L: 2.745"/ 69.723mm
    W: 2.244"/ 56.9976mm
    H: .501"/ 12.7254mm

    Currently we do not have a CAD model on hand.

    Click the link to add information to this solution:
    What are the overall dimensions of the USB interface board? Is there a CAD model available?

  • What are the mounting hole dimensions of the 1/2" Anti-Backlash Lead Nut

    The mounting hole dimension for the 1/2" 10 TPI 5 starts antibacklash nut is 1.13" or 28.7 mm. I added a drawing to the antibacklash nut product webpage so you can see other dimensions.

    Antibacklash nut product webpage: https://www.buildyourcnc.com/item/mechanical-leadscrews-antibacklash-nut-!5-5-starts-10-tpi

    Thanks

    Additional Information:
    You can also see the drawing directly here: https://www.buildyourcnc.com/images/Antibacklash_nut_1_2_drawing-800.JPG

    Click the link to add information to this solution:
    What are the mounting hole dimensions of the 1/2" Anti-Backlash Lead Nut

  • What are the dimensions of the 24v 8.3A power supply?

    The dimensions for our power supplies will be the same.

    Dimensions:
    L: 8.5" / 215.9mm
    W: 4.5" / 114.3mm
    H: 2" / 50.8mm

    Click the link to add information to this solution:
    What are the dimensions of the 24v 8.3A power supply?

  • WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

    Shipping crate size 121" X 36" X 92"

    Weight 511 LBS

    Click the link to add information to this solution:
    WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

  • THEY ARE ASKING FOR THE ACTIVATION CODE AND SERIAL NUMBER USB BOARD. HOW CAN GET THAT INFORMATION?

    To get the activation code, all you need to do is plug the USB board into the computer using a USB cable, go to machine -> firmware -> update. After the firmware is updated the program will present to you a dialog box containing the activation code.

    Additional Information:
    MUAR-QVXU-CAYW-CBWQ


    Additional Information:
    MUIS-RQPB-PTHB-QTTB

    Additional Information:
    MUIH-EERP-IADB-TRIP

    Additional Information:
    9zYWBVf5TxKSK7hEr8gFX3EBw5wa0AMMllQqgftIAnKvZ8DXItLxaPbOB3jWvnpczl/sM/De0scRPHfSxWGmcA==

    Additional Information:
    Key: LUQR-BQYI-SCEW-QVBT

    Additional Information:


    Additional Information:
    after i copy the code in the lower case i recived the same message (more than 8 times) ,, this is a evaluation...,, what i need to do to register properly?

    Click the link to add information to this solution:
    THEY ARE ASKING FOR THE ACTIVATION CODE AND SERIAL NUMBER USB BOARD. HOW CAN GET THAT INFORMATION?

  • WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

    76" X 40" X 26"
    230 LBS

    Click the link to add information to this solution:
    WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

  • WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?

    The blacktooth ships in 3 boxes.

    Structure 38x22x5 #54

    Components 14x13x13 #30

    Laser Tube 35x7x6 #4

    Click the link to add information to this solution:
    WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?

  • WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to add information to this solution:
    WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

  • I have a project very similar to cnc machine. I need 3 lead screws of 1.8 m with all set (supports, bearings...etc). and 3 NEMA 42 motors that I can connect with. if those are available, I need the information about shipping to Oman or UAE.

    We carry several sizes of lead screw and stepper motors on our website, for example here https://buildyourcnc.com/Item/mechanical-leadscrews-lead-screw-!5-5-starts-10-tpi and here https://buildyourcnc.com/ProductSearchResults.aspx. Please call us at 281-815-7701 to discuss the particular lengths you would need and shipping options.

    Additional Information:
    https://buildyourcnc.com/ProductSearchResults.aspx is not working

    Click the link to add information to this solution:
    I have a project very similar to cnc machine. I need 3 lead screws of 1.8 m with all set (supports, bearings...etc). and 3 NEMA 42 motors that I can connect with. if those are available, I need the information about shipping to Oman or UAE.

  • I have a blacktooth laser engraver. The Y Axis stepper motor needs to be replaced. Can you please provide me with the information I would need to replace this motor.

    Yes, if you need a replacement part on your machine please call us at 281-815-7701.

    Click the link to add information to this solution:
    I have a blacktooth laser engraver. The Y Axis stepper motor needs to be replaced. Can you please provide me with the information I would need to replace this motor.

  • What are the dimensions for a black toe torsion box? The machine dimensions are https://www.buildyourcnc.com/FAQ/1178 but I do not know the required overhang. I assume the overhang needs to be 3/4 inch ...
  • Are the VFDs and pumps compatible with the european electric circuit (230V/50Hz) and what kind of connectors will be delivered?

    The VFD (Variable Frequency Drive) is not supplied with plugs, cable or connectors. You provide the cable and power plug or connector for the VFD. All you need to do is get an extension cable and expose the three wires of the cable and connect them to R, T and Ground. Please see the datasheet on this page for wiring information: https://www.buildyourcnc.com/item/spindle-inverter-2!2kw-spindle-novfd

    Our pumps only have a 110 volt input, so you will need to purchase the pump in your country.

    Click the link to add information to this solution:
    Are the VFDs and pumps compatible with the european electric circuit (230V/50Hz) and what kind of connectors will be delivered?

  • WHAT IS SHIPPING DIMENSIONS AND WEIGHT FOR THE VERTICAL LASER.

    Shipping crate size 121" X 36" X 92"

    Weight 511 LBS

    Click the link to add information to this solution:
    WHAT IS SHIPPING DIMENSIONS AND WEIGHT FOR THE VERTICAL LASER.

  • WHAT IS THE SHIPPING WEIGHT AND DIMENSIONS FOR GREENLEAN?

    Shipping crate 121" X 36" X 92"

    Weight 511 LBS

    Additional Information:
    ship in india pls

    Additional Information:
    International shipping rates can be determined by:
    - adding products to the cart
    - go to the cart and enter shipped by address
    - and pressing the calculate shipping button

    Click the link to add information to this solution:
    WHAT IS THE SHIPPING WEIGHT AND DIMENSIONS FOR GREENLEAN?

  • I AM TAKING THE FINAL YEAR PROJECT IN BASE STATIONS AND AIR INTERFACE. WOULD LIKE TO HAVE SOME INFORMATION.

    The Federal Communications Commission (FCC) is the primary federal agency responsible for safety aspects of modern-day wireless telecommunications systems. The FCC's Internet address is shown below. Recently FCC published an excellent report, cited below, to assist citizens and local governments dealing with siting of telecommuncations towers. This report contains charts and figures describing the characteristics and performance of telecommunications antennas. The report also contains practical guidance on application of provisions of the Telecommunications Act of 1996, which is the governing legislation regarding safety and siting of wireless telelcommunications facilities. Web page: RF Safety Program Page. Report title: "A Local Government Official's Guide to Transmitting Antenna RF Emission Safety: Rules, Procedures, and Practical Guidance." The Local and State Government Advisory Committee (LSGAC) and the FCC have developed this guide to aid local governmental officials and citizens in understanding safety issues related to radiofrequency emissions from telecommunications towers. Gary Zeman, Sc.D., CHP Lawrence Berkeley National Laboratory

    Click the link to add information to this solution:
    I AM TAKING THE FINAL YEAR PROJECT IN BASE STATIONS AND AIR INTERFACE. WOULD LIKE TO HAVE SOME INFORMATION.

  • I'M SEARCHING FOR INFORMATION ABOUT THE HEALTH RISKS OF CELLULAR ANTENNAS' RADIATION. I NEED SCIENTIFIC (SCIENTIFIC PAPERS IN JOURNALS) THIS.

    Cellular telephone base stations are low-powered radiofrequency (RF) transmitters which operate at around 850-900 or 1800-1900 MHz (depending on the technology and region of the world). RF energy in a similar frequency range is used by many other technologies such as microwave ovens, UHF television, other communications systems, and radar. Health and safety issues related to RF energy have been studied for many years and there is an immense literature on the subject. Here are some sources that review health and safety issues related to RF energy from cellular base stations.

    A fact sheet published by the World Health Organization. There is also a Spanish version available on the WHO EMF website.
    Also see the IEEE EMBS Committee on Man and Radiation Report. Other reports are available through its website.
    The International Commission on Nonionizing Radiation Protection (ICNIRP) has published a lot on health and safety of RF energy. See its website. The ICNIRP published an article that describes the ICNIRP exposure limits for RF energy and their scientific rationale. See "Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic, and Electromagnetic Fields (up to 300 GHz)," Health Physics Vol. 74, No 4, pp 494-522, 1998.
    A very detailed assessment of the scientific evidence related to health and safety of mobile telephones and base stations is in the recent (May 2000) report by the Independent Expert Group on Mobile Phones (IEGMP) titled "Mobile Phones and Health" This study concludes "the balance of evidence to date suggests that exposures to RF radiation at levels below [international exposure guidelines] do not cause adverse health effects to the general population" but that "there may be biological effects at exposures below those guidelines." Public exposure to RF energy from cellular base stations is invariably far below the ICNIRP exposure guidelines.

    Kenneth R. Foster
    Professor, Bioengineering
    University of Pennsylvania

    Click the link to add information to this solution:
    I'M SEARCHING FOR INFORMATION ABOUT THE HEALTH RISKS OF CELLULAR ANTENNAS' RADIATION. I NEED SCIENTIFIC (SCIENTIFIC PAPERS IN JOURNALS) THIS.

  • The plans available for download for the "whiteAnt 3D Plastic Printer" do not have dimensions. Are the dimensions shown in the book? Is there a DWG file available?

    The plans for the whiteAnt 3D Printer will have the dimesions, and the dimensions will be on the individual pieces(cut to spec). The machine is relatively small, so maybe you expected the size(dimensions) to be larger.

    Click the link to add information to this solution:
    The plans available for download for the "whiteAnt 3D Plastic Printer" do not have dimensions. Are the dimensions shown in the book? Is there a DWG file available?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.