[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 14519

Question: How much would shipping be to 03741 zip New Hampshire for 4 Hiwin 78" rails

Current Solution

Since that item is over the $50 free shipping threshold, the shipping is free unless you desire a specific carrier. For a large, heavy and long parcel, the shipping will most likely go through FedEX or UPS.

Respond:

Other Possible Solutions to this Question

  • I want to order 8 Hiwin Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US.

    Prices on amazon are fixed costs for shipping. The website generally reports high costs for international shipments but we can give you a better quote if you care to email sales@buildyourcnc.com

    Click the link to respond:
    I want to order 8 Hiwin Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US.

  • Dear Sir or Madam, I wonder how much the greenbull 5x shipping will cost to Lebanon.

    To determine the shipping cost of a machine (i.e. greenBull 5x):

    - You can add the greenBull 5x to the cart by going to the machine page and clicking on the add to cart button

    - In the checkout process, enter your address and then click on get shipping rates. You will be presented by a list of shipping costs to your location.

    Click the link to respond:
    Dear Sir or Madam, I wonder how much the greenbull 5x shipping will cost to Lebanon.

  • I want to order 8 HIWIN Linear Guide Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US

    Prices on amazon are fixed costs for shipping. The website generally reports high costs for international shipments but we can give you a better quote if you care to email sales@buildyourcnc.com

    Click the link to respond:
    I want to order 8 HIWIN Linear Guide Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US

  • how long is the build time for a black toe 2x4 roller chain router and shipping time to ny?

    All of our machines are a week lead time, other than the greenLean which is 2 weeks. Depending where your current location is,shipping will take anywhere from 1 week in the US, 1-5 weeks over seas.

    Click the link to respond:
    how long is the build time for a black toe 2x4 roller chain router and shipping time to ny?

  • I would like some longer HIWIN rails and ballscrews for my x-axis, 9 feet or 108 inches. You list maximums as 78 inches.

    Yes, however, if you are needing a length of the HIWIN specification rail longer than our 78" max length, then you can abut more than one rail together to increase the length of the rail. We do this for our long X-Axis travels on our Fabricator pro machine.

    Click the link to respond:
    I would like some longer HIWIN rails and ballscrews for my x-axis, 9 feet or 108 inches. You list maximums as 78 inches.

  • What are the Part numbers / specs for the HIWIN Rails? HG series? RG Series?

    The HIWIN rail we stock are part number HGR20 series. 20mm guide length.

    Click the link to respond:
    What are the Part numbers / specs for the HIWIN Rails? HG series? RG Series?

  • CAN YOU PLEASE TELL ME THE AVAILABILITY OF 12X36 BLUE CHICK 4.2, AND COST FOR SHIPPING TO ZIP 72802 IN RUSSELLVILLE, ARKANSAS?

    Yes, the blueChick kits are available. You can get the shipping rates automatically in the shopping cart. There will be a calculate shipping button on the enter shipping information section of the shopping cart.

    Click the link to respond:
    CAN YOU PLEASE TELL ME THE AVAILABILITY OF 12X36 BLUE CHICK 4.2, AND COST FOR SHIPPING TO ZIP 72802 IN RUSSELLVILLE, ARKANSAS?

  • I ordered a 2.2kW spindle as a guest on March 3rd. How long does it take for you to provide shipping information?

    I will check

    Additional Information:
    The license was purchased and the developer is sending you the license shortly.

    Click the link to respond:
    I ordered a 2.2kW spindle as a guest on March 3rd. How long does it take for you to provide shipping information?

  • HOW MUCH SILICONE TUBE DO I NEED FOR A GREEN LEAN TO CONNECT THE SPINDLE

    The greenlean requires 56 feet of 1/4 Inside Diameter and 3/8 Outside Diameter silicon tube for the spindle.

    Additional Information:
    20

    Additional Information:
    20

    Click the link to respond:
    HOW MUCH SILICONE TUBE DO I NEED FOR A GREEN LEAN TO CONNECT THE SPINDLE

  • Hello, I'm wondering if you could make a larger laser cnc if someone asks for it? Something like 36" x 52". And how much would it be?

    We are developing a 4 foot by 8 foot (48" x 96") laser with 80 watts of power. If you need a laser at 36" x 52", you could use the 4'x8' laser and just build a shorter table. We will have this machine available in the latter portion of 2015.

    Click the link to respond:
    Hello, I'm wondering if you could make a larger laser cnc if someone asks for it? Something like 36" x 52". And how much would it be?

  • What is your shipping costs for the greenLean CNC machine to Perth Western Australia

    You can determine if the country is serviceable by:
    - selecting the items you want to purchase on the website
    - go to the cart (shopping cart top left of any webpage)
    - log in, or register
    - Enter the address and click on calculate shipping.

    The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

    The shipping times are determined by the service you select in the shopping cart. If a machine is purchased, we generally have a one week lead time unless otherwise stated in the description of the machine's product page.

    Click the link to respond:
    What is your shipping costs for the greenLean CNC machine to Perth Western Australia

  • How feasible would a vacuum hold-down system be for a vertical CNC like the greenLean?

    Building a vacuum table, for any CNC machine is possible but doing it right might take a adequate amount of information and extensive planning. Depending on the overall complexity you want to build.
    Example, you want sections, and valves that can be operated to close sections of the table to allow vacuum to a specific spot of you material.
    It is possible and would be a very precise method to hold down your material.


    Additional Information:
    Thanks. It may be something I'd like to try on my greenLean at some point. Dan Spangler wrote a nice article on building a "Universal" CNC vacuum table in the latest issue of Make magazine, volume 41.

    Click the link to respond:
    How feasible would a vacuum hold-down system be for a vertical CNC like the greenLean?

  • how much would your vertical laser kit cost without the wood components and door plastic shipped to Canada

    Good question. I will need to add up the cost. However, the complete kit with the wood components will cost in the range of $300 to $500 using freight.

    Additional Information:
    I will add a price option on the Vertical Laser XL page that shows the assembly price without the wood structural parts. Are you wanting the rails included in the price?

    Additional Information:
    Hi, I was expecting an email answer, I did not know that you answered. Also I am in Fiji, not Canada. There is a flaw with your question form, It would not accept Fiji because we have no postal codes, so I put in my old Canadian code so that it would accept my question.

    Yes we would need the rails and any mechanical and electrical components. Our plan is to build it against a wall in a shipping container.

    If you do not have a suitable freight forwarder I can ask at this end because people frequently receive shipping containers.

    Thank you,

    George

    Click the link to respond:
    how much would your vertical laser kit cost without the wood components and door plastic shipped to Canada

  • What would be your recommendation for "power supply 2 (24vdc)" connecting to USB motion card?

    A 24V connection to the USB motion card is only needed if you are using limit switches (inputs), powering the spindle/VFD speed and direction, and for the outputs, for powering other devices (mist, coolant, etc.).

    If you are using a VFD (Variable Frequency Drive, also called Inverter) for a spindle, they typically have a 24V out terminal that can be used with our USB motion card. If you are not using a spindle/VFD (we highly recommend one), then you will need to purchase a 24v power supply to power that side of the board.

    The outputs mentioned above are to connect to external devices and will require a relay (a mechanical switch that is controlled by a digital signal). This mechanical switch can turn on a device like coolant and mist, or even a router, if you are using one. A relay is required to turn on these devices because the devices are typically higher voltage, like mains (110v or 220v). So, a relay can turn on or off a high voltage device with a lower voltage (24v) signal.

    Click the link to respond:
    What would be your recommendation for "power supply 2 (24vdc)" connecting to USB motion card?

  • what options can you offered to international customers to assist in them building one of your machines? International shipping of a kit would be too expensive.

    We are able to ship internationally but unfortunately we cannot control the shipping costs incurred for international customers. However, if you are associated with educational programs or Makerspaces and/or Fab Labs we do offer certain discounts in some cases. Please send an email to customer service for more information on receiving a quote.

    Click the link to respond:
    what options can you offered to international customers to assist in them building one of your machines? International shipping of a kit would be too expensive.

  • I just submitted an order but would like to add an item to it before it ships

    In regards to adding more items to a previous purchase, please email or call: customerservice@buildyourcnc.com/281-815-7701, so we can stop the previous shipment and add the items you wish to add to the previous order.

    Also depending on size and weight of the new item, a additional coverage price for shipping might be required.

    Click the link to respond:
    I just submitted an order but would like to add an item to it before it ships

  • IT POSSIBLE TO BUY THE CAD FILES FOR BLACK FOOT MACHINE, MECHANICAL PARTS AND ELECTRONICS BUT NOT WOODEN PARTS, SAVE SHIPPING COSTS? IN THAT CASE I WOULD INSTRUCT SOMEONE MILL ME.

    The files and hardware option for our machines has been removed from the site due to the following reasons:
    Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
    The abuse of these files over the internet.
    Ultimately may reduce the sales of machines keeping us in business.
    Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

    Additional Information:
    NO, is not possible, I can help with the shipping cost

    Click the link to respond:
    IT POSSIBLE TO BUY THE CAD FILES FOR BLACK FOOT MACHINE, MECHANICAL PARTS AND ELECTRONICS BUT NOT WOODEN PARTS, SAVE SHIPPING COSTS? IN THAT CASE I WOULD INSTRUCT SOMEONE MILL ME.

  • How much is shipping time

    All of our machines are a week lead time, other than the greenLean which is 2 weeks. Depending where your current location is,shipping will take anywhere from 1 week in the US, 1-5 weeks over seas.

    Click the link to respond:
    How much is shipping time

  • just placed an order for 2 nema 34 and 1 24 stepper motors i meant to have be 1, 34 and 2, 24 stepper motors. I need to change that before shipping