We carry several sizes of lead screw and stepper motors on our website, for example here https://buildyourcnc.com/Item/mechanical-leadscrews-lead-screw-!5-5-starts-10-tpi and here https://buildyourcnc.com/ProductSearchResults.aspx. Please call us at 281-815-7701 to discuss the particular lengths you would need and shipping options.

Additional Information:
https://buildyourcnc.com/ProductSearchResults.aspx is not working

Additional Information:



Additional Information:

Click the link to add information to this solution:
I have a project very similar to cnc machine. I need 3 lead screws of 1.8 m with all set (supports, bearings...etc). and 3 NEMA 42 motors that I can connect with. if those are available, I need the information about shipping to Oman or UAE.

To determine the status of your order, simply log in and click on the "[My Account]" link at the top of the page. If you purchased as a guest, you will need to call the office to determine the status and get the tracking number for your order.

The office phone number can be found by clicking "Need Help?" is located at the top right of all buildyourcnc.com web pages.

Click the link to add information to this solution:
I placed an order for a 4th axis with tailstock on Wednesday and was just wanting to check on the shipment status. I'm needing the item early next week and need to confirm that it will arrive in time. Thank you.

I can provide a paypal invoice for the difference in price. Just give me an email at customerservice@buildyourcnc.com and then I can send you the invoice.

Additional Information:
I can provide a paypal invoice for the difference in price. Just give me an email at customerservice@buildyourcnc.com and then I can send you the invoice.

Additional Information:
thats great thank you. please send it to james_moya@hotmail.com and i will be paying with my cc.

Additional Information:
thats great thank you. please send it to james_moya@hotmail.com and i will be paying with my cc.

Click the link to add information to this solution:
i placed an order with you on 5.27.20 for 3 stepper motors. i realize now i need the rest of the electronics (drivers, breakout board power supply etc...) i see you offer a bundle and would like to know how i can get the rest of the bundle. im looking at the $390 bundle without the motors obviously. please advise. thank you

We just received our new inventory of motors and that specific stepper motor ski came back with only one shaft. I’m not at the office to look at this inventory, so if that is true, they will all be single shaft. We may have other stepper motors with included rear shafts, but I will have to see on Monday.

If I don’t have the double shaft, we will provide a refund upon receipt of the motors. My apologies for this error.

Additional Information:
Hi, I'm sending these motors back today. As I understand you, you might have some motors from the previous lot still in stock, and these would be double shaft but otherwise you don't have any and won't be getting any. If you do have two double shaft versions of this motor please send them; if you don't have two of them please let me know--today if possible--so I can start looking elsewhere. Thanks, Ted Armen

Click the link to add information to this solution:
we just received two nema 11 stepper motors per our order--USR2-2, however they are single shaft, we need double shaft, I thought that's what we ordered. We're sending them back, let me know if you do have the double shaft version and I'll try again to order them. I notice the model number on the motor ends in "A", where the packing slip shows "B".

Absolutely, I can answer this type of question and anything other questions you may have with your new-to-you CNC router.

Additional Information:
20

Click the link to add information to this solution:
[789] Can you help me with selecting a power supply ( and a few other components ) for the stepper motors that came with a homemade CNC Router I just purchased.

Here is the answer to your first questions regarding the blueChick motors:
https://buildyourcnc.com/FAQ/9024

The shipping of the blueChick CNC will depend on if the machine is assembled or not. There is a duty for international orders, but I am unsure of the cost in other countries other than the US.

Thanks

Click the link to add information to this solution:
What are the specs for the stepper motors on the Bluechick? How much for shipping to Toronto, ON, Canada? Is there duty for shipping to Canada?

Sure, let me check.

Additional Information:
Your order was shipped out on Tuesday (10/20/2020). I noticed that your email was not stored in the customer record when the order was made. I will send you the tracking number via email now.

Click the link to add information to this solution:
Placed an order for the cable set for the Pokeys57cnc interface on 10/20 but it is not showing up in My Account as being ordered. It was charged to my credit card and I have not had any info that it was received by you.

If your motors are hot to the touch, this is normal. Current is being drawn by the motor coils as the motor moves and as the motor stays at a position. If the motor is not using the current in the coils to move (holding it's position), the energy will be translated as heat (rather than motion, sound or light). Even while moving, some of the energy will be lost as heat. Remember that energy cannot be created nor destroyed.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Are the stepper motors on x and y axis suppose to be hot after running for approximately 30 min. I can touch them but they are hot.

No, the 3.1 version will not support slaving the X axis. You will either need to wire the two x axis driver to the same X signal pins, or use the DDCS v4.1 which does support slaving an axis.

Click the link to add information to this solution:
[823] I plan to use a DDCS stand alone controller for a CNC router build which will have two stepper motors on the x axis, one on Y and one on Z. Will the 3.1 version handle two motors synched on the X axis or will I need the 4.1 version?

We recommend checking the dip switch settings on your drivers, having the correct microstepping/amp settings along with the steps/unit will help the motors run as effective as possible.
This is a default parameter that we use while we test our motors:
Driver dip switch settings will be at a 1/16 microstepping and 2.7amp (11001100) for x/y-axis and the z-axis will be at 1/4 microstepping and 2.7amp (10101100).

In planet-cnc with increasing the motor speed, you will have to modify the settings in planet-cnc (File/settings/setup) you will modify the initial speed, maximum speed, and the acceleration.
X/Y-axis step/unit: 1422.22 initial speed:500 maximum speed:750 acceleration:25
Z-axis step/unit: 1600 initial speed:100 maximum speed:300 acceleration:25
The initial speed and maximum speed will have to be roughly tested and adjusted per application.
Make sure to adjust the JOG slide bard underneath the axis controls on screen to about 750, to compensate for your x/y-axis adjustments. If left alone the speed will max out at the default setting.

Here is a video tutorial to calculate the steps required depending on your mechanical linear motion components. (

Click the link to add information to this solution:
I bought Nema 24 motors and driver package with usb board. What do i need to have more speed? Cant even jog past 25 ipm without the motor stalling (not having enough torgue)

Did you install the Mach3 USB plug-in?

Make sure that you followed all of the steps and diagrams on the following page:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Click the link to add information to this solution:
ABSOLUTELY NOTHING WORKS. I HAVE ALL STRUCTURE AND MECHICAL PARTS OF THE BLACKTOOTH CUTTER DONE. HOWEVER WHEN WIRE UP STEPPER MOTOR TO DRIVER. THAT MACH 3 USB CONTROLLER BOARD, TRY JOG MOTOR, WORKS! PREVIOSULY HAD PLANET CNC BREAKOUT HOWRVER, ONLY MOVED MOTORS IN ONE DIRECTION COULDNT CHANGE IT. ANY HELP WOULD BE APRECIATED

Yes, the redLeaf plug-and-play CNC electronics can include a THC (Torch Height Controller) and motors of any size. The limit of the number of motors that this package can include is 8 motors in total.

Click the link to add information to this solution:
Will the redleaf package allow me to run a torch height controller and 2 nema 34 motors for my gantry? I would prefer to have motors on both sides of the machine with a heavy gantry

Yes, absolutely. If you need two motors for a single axis, you will want to use the same terminals for pulse and direction from the breakout board.

More specifically, you will wire the step/pulse pin to both drivers, and the direction pin to both drivers. If the motors need to turn in different directions, simply swap the A and B coil connections on one of the motors.

Additional Information:
i have checked the cnc machine for any flex and there is none but i still cannot cut circles they end up square.have checked calibration and it is correct but if i run at 4000 mm feed all comes out correct but if i change feed to say 2000 mm it makes the part small, like in tiny.

Click the link to add information to this solution:
I'm going to use 2 stepper motors for my X-axis. Can I use the same connections on the B/O board to do this knowing I will need 2 separate driver boards.

It is usually best to mount the motor in a way so it is spinning clockwise to avoid confusion.

Additional Information:
ok, but lets say the motors turn clockwise. if you mount it to ether side of the y axis it will pull to that side so what are the correct positions of the stepper motors. is it the left side or the right side of the y axis and also is it the front or back of the x axis?

Additional Information:
cw250 with mach3 controller

Click the link to add information to this solution:
What side of the x and y axis do you mount the stepper motor to? If it does not matter what side, do I have to change something in mach3?

Have you considered reversing the A and B coils on one of the motors to the drivers? This will cause the motor to spin in the opposite direction. This is the easiest method. Using the HEX inverter is a more complex method and not recommended for simple driving tasks.

Click the link to add information to this solution:
I have two nema 34 motors on my gantry and ordered a hex inverter, now I need to wire it correctly. What type of wiring hardware do I need and I will need a wiring diagram also. Please help.

Have you considered reversing the A and B coils on one of the motors to the drivers? This will cause the motor to spin in the opposite direction. This is the easiest method. Using the HEX inverter is a more complex method and not recommended for simple driving tasks.

Click the link to add information to this solution:
I have two nema 34 motors on my gantry and ordered a hex inverter, now I need to wire it correctly. What type of wiring hardware do I need and I will need a wiring diagram also. Please help.

Prices on amazon are fixed costs for shipping. The website generally reports high costs for international shipments but we can give you a better quote if you care to email sales@buildyourcnc.com

Click the link to add information to this solution:
I want to order 8 Hiwin Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US.

The most likely issue here is that your email did not save in our system. Please email us to determine your shipping status and tracking number at customerservice@buildyourcnc.com

Click the link to add information to this solution:
I ordered the Mach 3 usb controller board on the 1st and I have not received an order conformation or shipping confirmation. My account was charged however.

We currently do not have an available kits for adapting other versions of electronics (motors) to our drivers, other than our complete kits including our steppers.

For further custom related kits or requests please contact us: customerservice@buildyourcnc.com

Additional Information:


Additional Information:
Use one acorn cnc product. I have one and is great

Click the link to add information to this solution:
I have an emco vmc 100 mill with a rotary head tool changer I would like to use existing stepper motors do you have a kit you would recommend?