[ Log In ]
[ Register ]

Question #: 5760

Question: What are the Part numbers / specs for the HIWIN Rails? HG series? RG Series?

Current Solution

The HIWIN rail we stock are part number HGR20 series. 20mm guide length.

Respond:

Other Possible Solutions to this Question

  • About your HIWIN rails. What Carriage block does the 78" rails come with, 2 flange or 2 with no flange?

    The HIWIN rails come with the same flange blocks that are sold individually.

    Click the link to add information to this solution:
    About your HIWIN rails. What Carriage block does the 78" rails come with, 2 flange or 2 with no flange?

  • I just changed my X and Y to the ACME 1/2" 5 start lead screw. What are the motor tuning numbers. I have the book built machine.

    The settings that will have to be change will be your steps per inch in motor tuning (mach 3), or settings/axes(planetCNC). But we do not have the actual numbers/specs that will fit your 10 TPI 5 start lead screw, here is a tutorial video which explains how to get the exact numbers you need! (

    )

    Click the link to add information to this solution:
    I just changed my X and Y to the ACME 1/2" 5 start lead screw. What are the motor tuning numbers. I have the book built machine.

  • What are the technical details/dimensions for the 20mm Linear Guide Rail?

    For our Hiwin rail, you can find the specifications at this URL:
    https://www.buildyourcnc.com/item/mechanical-rails-HIWIN-Linear-20mm-Guide-Rail

    For our standard round linear rail, you can find the specifications at this URL:
    https://www.buildyourcnc.com/item/mechanical-rails-linear-guide-rails-20mm

    Additional Information:

    Click the link to add information to this solution:
    What are the technical details/dimensions for the 20mm Linear Guide Rail?

  • WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

    Shipping crate size 121" X 36" X 92"

    Weight 511 LBS

    Click the link to add information to this solution:
    WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

  • WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

    76" X 40" X 26"
    230 LBS

    Click the link to add information to this solution:
    WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

  • WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to add information to this solution:
    WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

  • WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

    Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
    To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
    The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
    Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


    Link:
    https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

    Click the link to add information to this solution:
    WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

  • What size/ kind of rail is the hiwin rail that you sell?

    My apologies for not having the specifications on the product page for our Hiwin rail and block:

    The specifications are as follows (we will add this information to the product page):

    Rail:
    Rail width: 20mm
    Mounting bolt: M5x16
    Mounting hole center to hole center: 60mm

    Guide Block:
    Width of block: 63mm
    Length of block:77.5mm
    Mounting holes distance in the width direction: 53mm
    Mounting holes distance in the length direction: 40mm

    Both:
    From bottom of rail to top of block: 30mm
    From block bottom to bottom of rail (clearance): 4.6mm

    Click the link to add information to this solution:
    What size/ kind of rail is the hiwin rail that you sell?

  • WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to add information to this solution:
    WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

  • WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Click the link to add information to this solution:
    WHAT ARE THE CABLE LENGTHS FOR BLACKTOE

  • DO YOU HAVE CAD AVAILABLE FOR THE HIWIN GUIDE BLOCKS SELL AND RAIL?

    We don't have cad models of the HIWIN blocks, but you can find the models on McMaster.com. They have can drawings and models for most of these types of parts.

    Click the link to add information to this solution:
    DO YOU HAVE CAD AVAILABLE FOR THE HIWIN GUIDE BLOCKS SELL AND RAIL?

  • DO YOU HAVE CAD AVAILABLE FOR THE HIWIN GUIDE BLOCKS SELL AND RAIL?

    We don't have cad models of the HIWIN blocks, but you can find the models on McMaster.com. They have can drawings and models for most of these types of parts.

    Click the link to add information to this solution:
    DO YOU HAVE CAD AVAILABLE FOR THE HIWIN GUIDE BLOCKS SELL AND RAIL?

  • What are the actual measurements of the 5/8 and 1/2 ID bearings?

    The dimensions for each bearing (5/8" and 1/2"):
    1/2": OD 1.1255" - 28.5877mm / height 0.3150" - 8.001mm

    5/8": OD 1.3750" - 34.925mm / height 0.3440" - 8.7376mm

    Click the link to add information to this solution:
    What are the actual measurements of the 5/8 and 1/2 ID bearings?

  • WHAT LEAD TIME CAN EXPECT FOR BLACKTOE SO PICK UP THE MACHINE?

    You can expect a one week lead time for our machines.

    Click the link to add information to this solution:
    WHAT LEAD TIME CAN EXPECT FOR BLACKTOE SO PICK UP THE MACHINE?

  • WHAT IS D.O.F OR DEPTH OF FIELD FOR THE BLACKTOOTH LASER AND LENS?

    Depth of Field. This is how far the focal point goes before re-expanding again. With a 2" lens, you have approximately 2-3mm of DOF. This means that you'll have 2-3mm of perfectly focused laser before it starts to re-expand again. If you have a 4" lens, you will have up to 7mm of DOF.

    Click the link to add information to this solution:
    WHAT IS D.O.F OR DEPTH OF FIELD FOR THE BLACKTOOTH LASER AND LENS?

  • WHAT IS SHIPPING DIMENSIONS AND WEIGHT FOR THE VERTICAL LASER.

    Shipping crate size 121" X 36" X 92"

    Weight 511 LBS

    Click the link to add information to this solution:
    WHAT IS SHIPPING DIMENSIONS AND WEIGHT FOR THE VERTICAL LASER.

  • WHAT ARE THE BLACKTOOTH LENS SIZES AND FOCAL LENGTH SPECIFICATIONS?

    The lens is 20mm wide and a 50.6mm focal length (the one included). This lens will stand up to at least 30PSI air assist.

    The mirrors are 25mm wide mirrors.

    Focal length is the distance from the lens to the material for the laser converge into the best focal point. If a lens is listed as 2". You measure 2" from the lens to the material, this will be the tightest point the laser can go before it starts to re-expand again losing focus.

    Click the link to add information to this solution:
    WHAT ARE THE BLACKTOOTH LENS SIZES AND FOCAL LENGTH SPECIFICATIONS?

  • WHAT ARE THE HEALTH RISKS OF LIVING NEAR A CELL PHONE TOWER?

    There is very little radiofrequency (RF) energy exposure to people inside a building from a cellular base station located on its roof. There are several reasons for this. First, the transmitters operate at low power levels. Second, the antennas are normally mounted near the edges of the roof and are aimed away from the building. Third, most cellular transmitters use "high gain" or panel antennas. Such antennas transmit most of their energy in a narrow beam (in the vertical direction) from their front surfaces, away from the building. They radiate very little energy downwards towards the roof or backwards from their rear surfaces. Finally, building materials absorb a significant fraction of the RF energy passing through them. As a result, the RF signal levels at any location inside the building are invariably low and far below safety limits. The situation might be different in some locations on the roof itself. RF signal levels close to (within a few feet) and directly in front of cellular base station antennas can easily exceed safety limits. Some precautions are needed to prevent people from walking directly in front of the antennas while they are transmitting. This applies also to paging and other systems that use rooftop antennas, some of which transmit at higher power levels than many cellular base stations. Kenneth R. Foster, Ph.D.

    Click the link to add information to this solution:
    WHAT ARE THE HEALTH RISKS OF LIVING NEAR A CELL PHONE TOWER?

  • WHAT TERMINALS ARE USED TO CONNECT THE INVERTER WALL OUTLET?

    Input to VFD:
    240V Active - R
    240V Neutral - S
    Ground - E

    Click the link to add information to this solution:
    WHAT TERMINALS ARE USED TO CONNECT THE INVERTER WALL OUTLET?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.