[ Log In ]
[ Register ]

Question #: 15571

Question: DOES THIS SUPPORT THC FUNCTIONS.

Current Solution

Yes, this board supports THC functions. I have tested the Proma THC and the PlasmaSens which use fiber optics for communication to reduce EMI.

Respond:

Other Possible Solutions to this Question

  • [596] Does this support THC functions

    Yes, this board supports THC functions. I have tested the Proma THC and the PlasmaSens which use fiber optics for communication to reduce EMI.

    Click the link to add information to this solution:
    [596] Does this support THC functions

  • [596] Does this support THC functions.

    Yes, this board supports THC functions. I have tested the Proma THC and the PlasmaSens which use fiber optics for communication to reduce EMI.

    Click the link to add information to this solution:
    [596] Does this support THC functions.

  • [575] Does this card support THC functions.

    This Mach3 USB controller does not support THC functions. I would recommend using the Pokeys57CNC controller instead.

    Here is a link to the Pokeys57CNC controller:
    https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

    Click the link to add information to this solution:
    [575] Does this card support THC functions.

  • [575] Does this support THC function?

    Unfortunately, all of the attemps I have made to use this controller with a THC did not work, so I would not recommend this board for plasma machines that use a THC. THe Pokeys57CNC controller will work with several THC controllers. I have used the Proma and the PlasmaSens controllers with the Pokeys57CNC.

    Click the link to add information to this solution:
    [575] Does this support THC function?

  • WHAT SIZE WRENCHES DOES THIS SPINDLE TAKE TO TIGHTEN?

    To loosen and tighten the collet nut for the 2.2kW spindle, I use a 22mm wrench (spanner) for the shaft and a 30mm wrench for the nut.

    Click the link to add information to this solution:
    WHAT SIZE WRENCHES DOES THIS SPINDLE TAKE TO TIGHTEN?

  • WHAT THE TECHNICAL SUPPORT FOR STAMPS.COM?

    The stamps.com technical support is developersupport@stamps.com

    Click the link to add information to this solution:
    WHAT THE TECHNICAL SUPPORT FOR STAMPS.COM?

  • GIVE ME THE TECHNICAL SUPPORT INFO FOR STAMPS.COM

    The stamps.com technical support is developersupport@stamps.com

    Click the link to add information to this solution:
    GIVE ME THE TECHNICAL SUPPORT INFO FOR STAMPS.COM

  • [803] Can this THC with another controller than the one mentionned ?

    This torch height controller can be used with any controller that allows three inputs to be assigned within Mach3. The pokeys57CNC is such a controller. The Mach3 USB controller cannot be used with a THC, but another controller that can accept inputs can be used. The three inputs are used to inform Mach3 of ARC up, ARC ok, and ARC down.

    Click the link to add information to this solution:
    [803] Can this THC with another controller than the one mentionned ?

  • DOES THE SOFTWARE WORK ON A MAC?

    There are several CAD/CAM programs out there for MacOS. Here is a list of a few: http://www.macuser.de/forum/f53/3d-2d-cad-395058/#post4499316
    I've also read good things about punchCAD: http://www.punchcad.com/
    Of course, there is always SketchUp if you are in a pinch. There are a few CAM plugins for SketchUp as well, but I've never used them, so I can't vouch for them.

    CAD/CAM will get you as far as designing your parts and producing the g-code, but if you also want to run the CNC machine with your Mac, you will need a piece of software similar to Mach3 or EMC to run the g-code. I haven't been able to find anything like these programs that runs on Mac, so you may have to run Mach3 or EMC in Windows using Boot Camp or a virtual machine such as VMware or Parallels.

    Personally, I would use the Mac to do all the CAD/CAM, then use a cheap PC to run the CNC machine.

    Additional Information:


    Additional Information:
    EasyDNC for OSX
    www.dnc-x.com

    Additional Information:


    Additional Information:
    Hi guys I’m new to the cnc and I’m beginning to learn how to operate and cad-cam software also my cnc runs on Mach3 my questions is if I should use MacBook to do all designs if I can have all this software to run on Mac or I have to use windows software to operate it? I have separate small computer connected to the cnc table who have Mach3 on it please help. Also if you know any other software much easy for beginners please let me know thank you guys!
    My email if needed is r1jastrzebski@gmail.com

    Additional Information:


    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:

    Click the link to add information to this solution:
    DOES THE SOFTWARE WORK ON A MAC?

  • DOES THE SOFTWARE WORK ON AN APPLE?

    There are several CAD/CAM programs out there for MacOS. Here is a list of a few: http://www.macuser.de/forum/f53/3d-2d-cad-395058/#post4499316
    I've also read good things about punchCAD: http://www.punchcad.com/
    Of course, there is always SketchUp if you are in a pinch. There are a few CAM plugins for SketchUp as well, but I've never used them, so I can't vouch for them.

    CAD/CAM will get you as far as designing your parts and producing the g-code, but if you also want to run the CNC machine with your Mac, you will need a piece of software similar to Mach3 or EMC to run the g-code. I haven't been able to find anything like these programs that runs on Mac, so you may have to run Mach3 or EMC in Windows using Boot Camp or a virtual machine such as VMware or Parallels.

    Personally, I would use the Mac to do all the CAD/CAM, then use a cheap PC to run the CNC machine.

    Additional Information:


    Additional Information:
    EasyDNC for OSX
    www.dnc-x.com

    Additional Information:


    Additional Information:
    Hi guys I’m new to the cnc and I’m beginning to learn how to operate and cad-cam software also my cnc runs on Mach3 my questions is if I should use MacBook to do all designs if I can have all this software to run on Mac or I have to use windows software to operate it? I have separate small computer connected to the cnc table who have Mach3 on it please help. Also if you know any other software much easy for beginners please let me know thank you guys!
    My email if needed is r1jastrzebski@gmail.com

    Additional Information:


    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:

    Click the link to add information to this solution:
    DOES THE SOFTWARE WORK ON AN APPLE?

  • HOW LONG DOES IT TAKE TO SHIP

    Unfortunately I am not able to give an estimate of shipping time. This is because there are multiple shipping options, Some of them cost more than others, but ensure the package arrives in a certain number of days. Others do not give a number of days, and many factors could change the length of shipping time, such as weather, or busy season. It would be best to choose an option you are comfortable with the price of, and then Google search the typical times it takes for that option to get to you, or call the shipping company and request that estimated time from them.

    Additional Information:

    Click the link to add information to this solution:
    HOW LONG DOES IT TAKE TO SHIP

  • HOW MANY SIDES DOES A TRIANGLE HAVE?

    The triangle has three (3) sides. The triangle is a polygon that contains three sides and three inner angles and three vertices.

    Additional Information:
    But if a triangle have a front and back side wouldn't the triangle have 5 sides

    Additional Information:
    Interesting slant (pun). A triangle would have 5 sides if the triangle had a thickness and became an object. A triangle drawn on paper with three lines would still only have three sides. A triangle is a primitive form of geometry (polygon) that can only have three sides in its simplest form. If you add complexity to the triangle with a thickness and count two more sides, then it really isn't the simplest form of the triangle anymore and it becomes another geometrical 3D primitive like a triangular prism.

    Additional Information:
    A triangle has multiply answers for number of sides but is made up of 3 lines.. this is because when connecting the 3rd line to form the shape you create an "inside". so you could say a triangle has 2 sides, an "outside" and "inside" or you could say 4 sides, an "inside" and 3 "outside facings" or 6 sides 3 "outside facings" and 3 "inside facings". none of these answers are incorrect technically. the important thing is that a triangle is made up of 3 inner angles adding upto 180 degree's.

    Additional Information:
    A triangle has 6 sides, there are 3 straight edges in AND out side of a triangle.

    Additional Information:
    I am fairly sure that a triangle has 12 sides (3 insides and 3 outsides on each side).

    Additional Information:


    Additional Information:


    Additional Information:


    Additional Information:
    4

    Additional Information:
    4

    Additional Information:
    4

    Additional Information:
    How many sides do a triangle have

    Additional Information:
    How many sides do a triangle have

    Additional Information:
    How many sides do a triangle have

    Additional Information:


    Additional Information:


    Additional Information:


    Additional Information:


    Additional Information:


    Additional Information:
    4


    Additional Information:


    Additional Information:


    Additional Information:

    Click the link to add information to this solution:
    HOW MANY SIDES DOES A TRIANGLE HAVE?

  • WHAT DOES COPYRIGHT PROTECT?

    Copyright, a form of intellectual property law, protects original works of authorship including literary, dramatic, musical, and artistic works, such as poetry, novels, movies, songs, computer software, and architecture. Copyright does not protect facts, ideas, systems, or methods of operation, although it may protect the way these things are expressed

    Click the link to add information to this solution:
    WHAT DOES COPYRIGHT PROTECT?

  • HOW MANY STRINGS DOES A VIOLIN HAVE?

    The violin has four strings.

    Additional Information:
    3

    Additional Information:

    Click the link to add information to this solution:
    HOW MANY STRINGS DOES A VIOLIN HAVE?

  • HOW LONG DOES THE TUBE LAST?

    The average lifespan of a tube is 1000-1500 hours IF ran at a max of 16mA for most of it's life. It's life will go down if you run constantly at it's max rating.

    CO2 laser tubes also have a shelf life. So make sure to only buy a replacement tube close to when you plan to install it, keeping it on a shelf for the future will only compromise it's life span.

    To measure your amperage going through your system. You go from the negative line of the tube and run it THROUGH your multimeter/ammeter and back out to the laser PSU. This will give you your amp usage. It will not hurt your multimeter either. Just be sure your connections are very snug since 20,000V is liable to arc very easily if a connection comes loose.

    Additional Information:
    what is life span of CO2 generator in videojet laser coding machineVJ3320

    Click the link to add information to this solution:
    HOW LONG DOES THE TUBE LAST?

  • WHAT MOTORS DOES THE BLACK TOOTH USE?
  • WHAT MOTORS DOES THE BLACK TOOTH USE?
  • WHAT DOES YOUR HEART PUMP?

    Your heart pumps blood.

    Click the link to add information to this solution:
    WHAT DOES YOUR HEART PUMP?

  • DOES MACH3 WORK ON A MAC?

    There are several CAD/CAM programs out there for MacOS. Here is a list of a few: http://www.macuser.de/forum/f53/3d-2d-cad-395058/#post4499316
    I've also read good things about punchCAD: http://www.punchcad.com/
    Of course, there is always SketchUp if you are in a pinch. There are a few CAM plugins for SketchUp as well, but I've never used them, so I can't vouch for them.

    CAD/CAM will get you as far as designing your parts and producing the g-code, but if you also want to run the CNC machine with your Mac, you will need a piece of software similar to Mach3 or EMC to run the g-code. I haven't been able to find anything like these programs that runs on Mac, so you may have to run Mach3 or EMC in Windows using Boot Camp or a virtual machine such as VMware or Parallels.

    Personally, I would use the Mac to do all the CAD/CAM, then use a cheap PC to run the CNC machine.

    Additional Information:


    Additional Information:
    EasyDNC for OSX
    www.dnc-x.com

    Additional Information:


    Additional Information:
    Hi guys I’m new to the cnc and I’m beginning to learn how to operate and cad-cam software also my cnc runs on Mach3 my questions is if I should use MacBook to do all designs if I can have all this software to run on Mac or I have to use windows software to operate it? I have separate small computer connected to the cnc table who have Mach3 on it please help. Also if you know any other software much easy for beginners please let me know thank you guys!
    My email if needed is r1jastrzebski@gmail.com

    Additional Information:


    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:

    Click the link to add information to this solution:
    DOES MACH3 WORK ON A MAC?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.