[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 3658

Question: What is the runout on the 2.5 KW spindle and how many bearings?

Current Solution

The runout on our 2.2kW spindle and number of bearings are:
Radial runout: 0.01mm - 0.000393701 inches, 3 Bearings

Respond:

Other Possible Solutions to this Question

  • Is the 4kv spindle constructed using two or four bearings and what size collets are included with the spindle/vfd combo?

    Yes, all of the spindles come with collets. The collets have a 1/4" (6.35mm) bore for end mills that have a 1/4" shank. The ER specification is different for the 1.5kW (ER-11) and the 2.2kW (ER-20).

    Click the link to respond:
    Is the 4kv spindle constructed using two or four bearings and what size collets are included with the spindle/vfd combo?

  • What is the maximum runout on your water-cooled spindles?

    TIR specifications for the ER-20 collet used on 2.2KW Spindles is .0004 inches.

    Click the link to respond:
    What is the maximum runout on your water-cooled spindles?

  • Is the 4kv spindle constructed using two or four bearings?

    We are posing that question with the supplier. The information will be provided shortly.

    Additional Information:
    The 4.0 kW spindle has 4 bearings. Tow of them are 7005C and the other two are 7003C

    Click the link to respond:
    Is the 4kv spindle constructed using two or four bearings?

  • Are there instructions to disassemble the 2.2KW spindle (220v)? We need to replace the bearings.

    We actually tried dissassembling one of our spindles in house with no success, but I just found a good thread on CNCZone that has a good set of photos and instructions.

    Here is the link: http://www.cnczone.com/forums/spindles-vfd/129454-water-cooled-chinese-spindle-disassembly.html

    Please let me know if this helps.

    Additional Information:
    Also, If you have no success, let us know and we will make an attempt here on video.

    Click the link to respond:
    Are there instructions to disassemble the 2.2KW spindle (220v)? We need to replace the bearings.

  • on the 2.2Kw water cooled spindle, what is the cooling port thread type and size?

    It is an M8 metric size on the port going into the spindle, and a 1/4" compression on the other side.

    Is the M8 port a M8x1.25 or M8x1?

    If you are referring to the book build, use a chamfer bit that is large enough to create a chamfer for most of the edge of the 3/4" thickness of the board, but still has a sliver of space for the bearing on which to ride.

    Additional Information:
    Mine is M8x1mm. I replaced the stock fitting with a brass hose barb and used "steel wire reinforced vacuum hose" with a 1/4" ID because it resists kinking and collapsing.

    Click the link to respond:
    on the 2.2Kw water cooled spindle, what is the cooling port thread type and size?

  • What is the liquid input and output barb size on your 2.2kw water cooled spindle?

    The spindle water inlet and outlet fittings are 1/4 Inside Diameter and 3/8 Outside Diameter.

    You can find the silicone tubes here:
    https://buildyourcnc.com/item/pneumatic-hydraulic-silicone-tubing

    This fitting will connect to the pump (1/2" male to 1/4" female):
    https://buildyourcnc.com/item/pneumatic-hydraulic-Tube-Fitting-Female-to-Male

    And this fitting will provide a reduced barbed size (1/4") for the tube:
    https://buildyourcnc.com/item/pneumatic-hydraulic-Tube-Fitting-Barbed-to-Male

    Click the link to respond:
    What is the liquid input and output barb size on your 2.2kw water cooled spindle?

  • What are the noise levels of the 1.5 Kw and 2.2Kw spindles?

    The noise level of the 1.5 kW and the 2.2 kW are very similar. The noise level is considerably quieter than typical routers. I am going to add sound db levels to this FAQ a bit later.

    Additional Information:
    The db (decibels) reading for the spindle is 70 and an 890 Porter Cable router (a lower powered tool than the spindle) measured 90 db. Both measurements were taken in the same environment and measured at the same distance from the tool.

    Additional Information:
    Practically silent. The inverter makes more noise!

    Additional Information:
    Practically silent. The inverter makes more noise!

    Click the link to respond:
    What are the noise levels of the 1.5 Kw and 2.2Kw spindles?

  • What is the rpm range of the 2.2kw spindle and inverter?

    The VFD is capable of a maximum of 400 Hz frequency. That converts to 24,000 RPM for the spindle. The minimum frequency is 100 Hz which is 6000 RPM.

    Click the link to respond:
    What is the rpm range of the 2.2kw spindle and inverter?

  • How many poles and pairs does your 2.5 KW spindle have?

    Our spindles are 2 pole, however we do not understand the "and pairs" portion of your question?

    Click the link to respond:
    How many poles and pairs does your 2.5 KW spindle have?

  • What is the recommended unit or brand of CPU cooling system for the 2.2 kw spindle on the Fabricator Pro machine

    There really isn't any specific brand. We purchase the components in a disparate fashion from China. I will product a video today that shows all of the components that we use and also offer the components on the website.

    From the upcoming video, you will be able to identify the parts is you feel you want to search for these components yourself.

    Click the link to respond:
    What is the recommended unit or brand of CPU cooling system for the 2.2 kw spindle on the Fabricator Pro machine

  • What is the warranty on your 2.2KW spindle

    We honor a one year warranty on most parts like main machine components, structural parts, mechanical parts and some electronic parts including spindles.

    Click the link to respond:
    What is the warranty on your 2.2KW spindle

  • I HAVE THE REDFLY SYSTEM AND A 2.2KW SPINDLE - 110V HOW DO CONNECT SPINDAL?

    It is not necessary to connect the spindle VFD (Variable Frequency Drive also called an Inverter) to the computer or CNC motion electronics. The VFD can be controlled independently using the control panel on the VFD. The control panel has the ability to control all aspects of the spindle including Speed, Torque, limits, etc. However, you can connect the VFD to the computer so the CNC control program can control the spindle during the CNC Machine operation. You will need to connect the VFD to the computer via a serial conection (in this case, it is the RS-485 protocol).

    The following are instructions on how to connect the VFD to Mach3 via this RS-485 serial connection.

    The first thing you will need is the dynamic link library to pair with mach3 called the Huanyang VFD Mach3 PlugIn. You can find this file at the mach3 support forum here: http://www.machsupport.com/forum/index.php/topic,14182.0.html

    You will also need to download the Microsoft .net 3.5 framework and install it: https://www.microsoft.com/en-us/download/details.aspx?id=21

    Follow the pdf that comes with the library file, but here is a synopsis of what you need to do (I also added a lot more information that may be useful during this process as the manual does not cover the main connections that need to be done):

    You will need to program your VFD so that it knows how to communicate with mach3 and the computer (go into the programming mode of the VFD and change these parameters):
    - PD001 - value 2 - Enables with communication aspect of the VFD
    - PD002 - value 2 - Enables frequency control from the communcations port
    - PD163 - value 1 - VFD address
    - PD164 - value 1 - Baud rate of 9600 (speed of the communication)
    - PD165 - value 3 - 8N1 RTU - 8 bits (that's the size of the word that gets communicated), N (No parity or no error checking) and 1 (1 stop bit)

    Copy the dll file to the PlugIns folder of mach3.

    Connect the RX and TX lines to your computer. There are a couple ways you can do this, but the recommended way would be to use an FTDI USB device which converts a USB to a serial com port. The device will have Rx and Tx connectors to connect to the VFD terminals with the same labels. This method is recommended since serial ports are not as common in computers these days.

    Next, you will need to configure mach3 to use the plugin library. Start mach3 and click on Menu -> config ->Config Plugins. Enable the new plugin by clicking on the red cross on the left column next to the plug in. Restart mach3 after doing this.

    No you need to configure mach3 to use the HuanyangVFD plugin. Go to the ports & pins configuration and select the spindle setup tab. Make sure that the Disable Spindle Relays checkbox is unchecked. We don't want mach3 to output a signal for a relay since the spindle will start up and turn off within the VFD and not from an external relay.

    Next, go to the HuanyangVFD settings by clicking on Menu -> plugin control -> HuanyangVFD. Set the parameters to the same settings you put into the VFD programming. The com port will be shown as new hardward when you plug in the USB FTDI device. A little bubble will be displayed at the bottom right where it will notify you that a new device is being installed (be patient while windows assigns a com port). Alternatively, you can use the windows device manager to see which port was set for the new USB FTDI device). You may need to restart mach3 several times until you get the correct information displayed in the PD001 and PD002 fields. When the com port is correct and the other parameters, like baud and VFD address is the same as you entered in the programming, then the PD001 and PD002 will show the number 2, otherwise, a 99 will appear which means that communication was not successful.

    You can now control the on/off and RPM of the spindle using the RS485 communication between mach3 and the VFD.

    Additional Information:
    The question was how to connect the spindle to the redfy. I did not receive a VFD.
    I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindle?

    Additional Information:
    If you received a spindle without a VFD, please contact us asap. Our spindle will not work without a VFD.

    Additional Information:
    Hi, how is this setup in mach4?

    Click the link to respond:
    I HAVE THE REDFLY SYSTEM AND A 2.2KW SPINDLE - 110V HOW DO CONNECT SPINDAL?

  • What is the benefit to using a spindle over a standard router?

    This solution will refer to the water cooled spindles that we sell. Generally, routers are air cooled which push air downwards through the router to cool the router motor. This has an undesirable effect for CNC machines that will blow the dust and chips into the air. The water cooled spindle will not blow since it uses water to cool the spindle motor. This allows the chips and dust to be confined within the dust shoe and get removed by the vacuum. Additionally, standard routers have a sound level that far exceeds that of the spindle.

    Click the link to respond:
    What is the benefit to using a spindle over a standard router?

  • I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

    It is not necessary to connect the spindle VFD (Variable Frequency Drive also called an Inverter) to the computer or CNC motion electronics. The VFD can be controlled independently using the control panel on the VFD. The control panel has the ability to control all aspects of the spindle including Speed, Torque, limits, etc. However, you can connect the VFD to the computer so the CNC control program can control the spindle during the CNC Machine operation. You will need to connect the VFD to the computer via a serial conection (in this case, it is the RS-485 protocol).

    The following are instructions on how to connect the VFD to Mach3 via this RS-485 serial connection.

    The first thing you will need is the dynamic link library to pair with mach3 called the Huanyang VFD Mach3 PlugIn. You can find this file at the mach3 support forum here: http://www.machsupport.com/forum/index.php/topic,14182.0.html

    You will also need to download the Microsoft .net 3.5 framework and install it: https://www.microsoft.com/en-us/download/details.aspx?id=21

    Follow the pdf that comes with the library file, but here is a synopsis of what you need to do (I also added a lot more information that may be useful during this process as the manual does not cover the main connections that need to be done):

    You will need to program your VFD so that it knows how to communicate with mach3 and the computer (go into the programming mode of the VFD and change these parameters):
    - PD001 - value 2 - Enables with communication aspect of the VFD
    - PD002 - value 2 - Enables frequency control from the communcations port
    - PD163 - value 1 - VFD address
    - PD164 - value 1 - Baud rate of 9600 (speed of the communication)
    - PD165 - value 3 - 8N1 RTU - 8 bits (that's the size of the word that gets communicated), N (No parity or no error checking) and 1 (1 stop bit)

    Copy the dll file to the PlugIns folder of mach3.

    Connect the RX and TX lines to your computer. There are a couple ways you can do this, but the recommended way would be to use an FTDI USB device which converts a USB to a serial com port. The device will have Rx and Tx connectors to connect to the VFD terminals with the same labels. This method is recommended since serial ports are not as common in computers these days.

    Next, you will need to configure mach3 to use the plugin library. Start mach3 and click on Menu -> config ->Config Plugins. Enable the new plugin by clicking on the red cross on the left column next to the plug in. Restart mach3 after doing this.

    No you need to configure mach3 to use the HuanyangVFD plugin. Go to the ports & pins configuration and select the spindle setup tab. Make sure that the Disable Spindle Relays checkbox is unchecked. We don't want mach3 to output a signal for a relay since the spindle will start up and turn off within the VFD and not from an external relay.

    Next, go to the HuanyangVFD settings by clicking on Menu -> plugin control -> HuanyangVFD. Set the parameters to the same settings you put into the VFD programming. The com port will be shown as new hardward when you plug in the USB FTDI device. A little bubble will be displayed at the bottom right where it will notify you that a new device is being installed (be patient while windows assigns a com port). Alternatively, you can use the windows device manager to see which port was set for the new USB FTDI device). You may need to restart mach3 several times until you get the correct information displayed in the PD001 and PD002 fields. When the com port is correct and the other parameters, like baud and VFD address is the same as you entered in the programming, then the PD001 and PD002 will show the number 2, otherwise, a 99 will appear which means that communication was not successful.

    You can now control the on/off and RPM of the spindle using the RS485 communication between mach3 and the VFD.

    Additional Information:
    The question was how to connect the spindle to the redfy. I did not receive a VFD.
    I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindle?

    Additional Information:
    If you received a spindle without a VFD, please contact us asap. Our spindle will not work without a VFD.

    Additional Information:
    Hi, how is this setup in mach4?

    Click the link to respond:
    I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

  • I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

    It is not necessary to connect the spindle VFD (Variable Frequency Drive also called an Inverter) to the computer or CNC motion electronics. The VFD can be controlled independently using the control panel on the VFD. The control panel has the ability to control all aspects of the spindle including Speed, Torque, limits, etc. However, you can connect the VFD to the computer so the CNC control program can control the spindle during the CNC Machine operation. You will need to connect the VFD to the computer via a serial conection (in this case, it is the RS-485 protocol).

    The following are instructions on how to connect the VFD to Mach3 via this RS-485 serial connection.

    The first thing you will need is the dynamic link library to pair with mach3 called the Huanyang VFD Mach3 PlugIn. You can find this file at the mach3 support forum here: http://www.machsupport.com/forum/index.php/topic,14182.0.html

    You will also need to download the Microsoft .net 3.5 framework and install it: https://www.microsoft.com/en-us/download/details.aspx?id=21

    Follow the pdf that comes with the library file, but here is a synopsis of what you need to do (I also added a lot more information that may be useful during this process as the manual does not cover the main connections that need to be done):

    You will need to program your VFD so that it knows how to communicate with mach3 and the computer (go into the programming mode of the VFD and change these parameters):
    - PD001 - value 2 - Enables with communication aspect of the VFD
    - PD002 - value 2 - Enables frequency control from the communcations port
    - PD163 - value 1 - VFD address
    - PD164 - value 1 - Baud rate of 9600 (speed of the communication)
    - PD165 - value 3 - 8N1 RTU - 8 bits (that's the size of the word that gets communicated), N (No parity or no error checking) and 1 (1 stop bit)

    Copy the dll file to the PlugIns folder of mach3.

    Connect the RX and TX lines to your computer. There are a couple ways you can do this, but the recommended way would be to use an FTDI USB device which converts a USB to a serial com port. The device will have Rx and Tx connectors to connect to the VFD terminals with the same labels. This method is recommended since serial ports are not as common in computers these days.

    Next, you will need to configure mach3 to use the plugin library. Start mach3 and click on Menu -> config ->Config Plugins. Enable the new plugin by clicking on the red cross on the left column next to the plug in. Restart mach3 after doing this.

    No you need to configure mach3 to use the HuanyangVFD plugin. Go to the ports & pins configuration and select the spindle setup tab. Make sure that the Disable Spindle Relays checkbox is unchecked. We don't want mach3 to output a signal for a relay since the spindle will start up and turn off within the VFD and not from an external relay.

    Next, go to the HuanyangVFD settings by clicking on Menu -> plugin control -> HuanyangVFD. Set the parameters to the same settings you put into the VFD programming. The com port will be shown as new hardward when you plug in the USB FTDI device. A little bubble will be displayed at the bottom right where it will notify you that a new device is being installed (be patient while windows assigns a com port). Alternatively, you can use the windows device manager to see which port was set for the new USB FTDI device). You may need to restart mach3 several times until you get the correct information displayed in the PD001 and PD002 fields. When the com port is correct and the other parameters, like baud and VFD address is the same as you entered in the programming, then the PD001 and PD002 will show the number 2, otherwise, a 99 will appear which means that communication was not successful.

    You can now control the on/off and RPM of the spindle using the RS485 communication between mach3 and the VFD.

    Additional Information:
    The question was how to connect the spindle to the redfy. I did not receive a VFD.
    I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindle?

    Additional Information:
    If you received a spindle without a VFD, please contact us asap. Our spindle will not work without a VFD.

    Additional Information:
    Hi, how is this setup in mach4?

    Click the link to respond:
    I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

  • What is the Greenbull average power consumption in conjunction with 2.2KW spindle?

    You can determine you overall CNC machine current consumption be adding your spindle power plus your CNC motion power and the power that your computer requires.

    the formula to understand the current of each component is watts = volts x current, or W = V * I, or with some algebra, Current (I) = Watts (W) / Volts (V)

    For example:

    Spindle:
    The 2.2 kW = 2200 watts and you can find the current by taking the input voltage of 220 volt and get the current using the above formula: 2200 W / 220 V = 10 A (Amps)

    CNC motion electronics:
    The power supply that comes with our machines is generally 8.8 A

    Computer:
    The computer that you use to control the CNC machine will have a specific wattage. Let's say the watts is 500: 500 W / 110 V = 4.5 A

    Add them up: 10 A + 8.8 A + 4.5 A = 23.3 Amps

    Click the link to respond:
    What is the Greenbull average power consumption in conjunction with 2.2KW spindle?

  • what are the dimensions and model number of the 3/8" ID roller bearings on your website?

    The specifications for our 3/8" bearings are R6ZZ. The ZZ means double metal shielded. The metal shielding is to protect the ball bearings between the inner race and outer race.

    Inside diameter: 3/8"
    Outside Diameter: 7/8"
    Width: 9/32"

    Click the link to respond:
    what are the dimensions and model number of the 3/8" ID roller bearings on your website?

  • how much does the 2.2kW spindle and the VFD weigh together?

    The weight of the 2.2kW spindle without the VFD (variable frequency drive or inverter) is 11 lbs or 5 kg.

    The 2.2kW spindle with the VFD is 15 lbs or 6.8 kg.

    Click the link to respond:
    how much does the 2.2kW spindle and the VFD weigh together?

  • Can you tell me what gauge wire is needed for limits switches and the spindle?

    The hookup wires you will need is 22 to 24 AWG stranded and shielded for the wiring of the limit switches and E_Stop. Our kit customers select various places for these switches, so we don't supply the wiring. If you don't use shielded cable, you will need to change the debounce setting in Mach3 (if that is the control program you are using).

    We typically use 14 AWG stranded wire for the VFD to Spindle (U, V, W) connections.

    Click the link to respond:
    Can you tell me what gauge wire is needed for limits switches and the spindle?