For our BYCNC book, we have a pdf file with all the parts you will need to fabricate here: (https://buildyourcnc.com/Documents/CNC%20Kit%201-1.pdf), however some modifications and updates have been made, which you can purchase the new files and DVD here: (https://buildyourcnc.com/cnckitintro.aspx). We do not have any .dxf files available for any machines we currently sell.

Click the link to add information to this solution:
I have the BYO CNC book. Any dxf or cad files available?

The plans for the whiteAnt 3D Printer will have the dimesions, and the dimensions will be on the individual pieces(cut to spec). The machine is relatively small, so maybe you expected the size(dimensions) to be larger.

Click the link to add information to this solution:
The plans available for download for the "whiteAnt 3D Plastic Printer" do not have dimensions. Are the dimensions shown in the book? Is there a DWG file available?

We do not currently provide any plans for our machines. We do provide a scratch build kit with plans, DVD, and hardware. You can find it here https://www.buildyourcnc.com/cnckitintro.aspx

Additional Information:
WE are a technical school and would like to build a laser cutter for the school that can cut up to 6mm plate please help us ti find drawings to build it

Click the link to add information to this solution:
blacktooth cnc laser plans, are they available? I would like to build my own parts. are there 3D cad files available?

You will need a cam program to create machining operations for the geometry in the .dwg file. The CAM program outputs these machining operations into g-code for the control program (planet-cnc) to use.

I have a couple of tutorials that explain this concept.
http://www.buildyourcnc.com/tutorials/Tutorial-sketchup-fabrication-fabricate-cad-cam-dxf

The following is an older video but get's the point across:
http://www.buildyourcnc.com/process1.aspx

Additional Information:

Click the link to add information to this solution:
HAVE CAD FILES (.DWG AND .DWF) FOR THE GUITARS. HOW DO LOAD THEM INTO PLANT CNC SOFTWARE USE?

Dealing with the dimensions of our scratch build kit, you can find the design and dimensions here (https://www.buildyourcnc.com/Documents/CNC%20Kit%201-1.pdf).
You can go to the main CNC book page here (https://www.buildyourcnc.com/Book.aspx).

Click the link to add information to this solution:
I am looking for the dimensions for drilling from the plans in the book

Yes, the CNC machine hardware and plans combo is the same machine as in the book. The machine that we provide the plans for, can be found on the website, here http://buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:



Additional Information:

Click the link to add information to this solution:
IS THE HARDWARE AND PLANS MACHINE SAME AS BOOK MACHINE?

The dimensions for our USB breakout board are:

L: 2.745"/ 69.723mm
W: 2.244"/ 56.9976mm
H: .501"/ 12.7254mm

Currently we do not have a CAD model on hand.

Click the link to add information to this solution:
What are the overall dimensions of the USB interface board? Is there a CAD model available?

My favorite explanation and video onhow to make a torsion box table comes from the Wood Whisperer.

Part 1 of the torsion box video can be found here:

Click the link to add information to this solution:
There was a set of plans for the torsion table needed for the 4x8 machine, I cannot find them.

The overall dimensions of our 2.5 modular stepper divers is:

L: 1.875"/ 47.625mm
W: 1.433"/ 36.3982mm
H: .585"/ 14.859mm (height might change due to different terminal block height (other we have on hand is .464"/ 11.7856mm))

Currently we do not have a CAD model on hand.

Click the link to add information to this solution:
What are the overall dimensions of the 2.5A small stepper drivers? Is there a CAD model available?

We do not offer any free plans. We offer the CNC Scratch Build Kit which includes plans to build a CNC machine from scratch. You can find more information about this by clicking on this link https://buildyourcnc.com/cnckitintro.aspx

Additional Information:
WTF!! It says right on your utube page free plans available. I'll paste it from Utube right here.(DIY CNC Router for Under $900 - Free Plans Available) Very misleading, I spent a lot of time looking for this stuff and am lucky I found this because apparently none of its available for free. Very misleading, dishonest sales tactics. I'm sure you've made money conning honest people out of there money but your not gonna get shit from me. After reading what other people here have written, and the fact that you lie about the cost, at least on UTUBE, It is clear your a liar and a piece of shit. carry on though by all means and continue making money being a liar.

Additional Information:
So maybe you should edit your YT post that says you DO have free plans?

Click the link to add information to this solution:
I was told you have some free CNC machine plans. I can't find them. Where are they?

You can find a diagram that describes the pin-out for the 2.5 am Driver that is intended for the 3D Printer Main Board, but can be used as a standalone driver as well.

Additional Information:
Where is the diagram located?

Click the link to add information to this solution:
Is there a diagram or schematic showing which pin on the 3D printer driver is ABCD?

You can use one of the terminals on the input side of the breakout board to connect the e-stop switch.

Additional Information:

Click the link to add information to this solution:
WHICH WIRES ARE CONNECTED TO THE EMERGENCY STOP BUTTON

Yes, we can provide a laser attachment for the long Z version of the greenBull 4x, 5x and 6x. Please call us to get more information and pricing for the laser attachment.

Click the link to add information to this solution:
I have a greenbull 5x with the long Z. Is there a laser kit that I can get for that model?

Probably.

Click the link to add information to this solution:
Are there supposed to sockets on the breakout board I picked up yesterday?

The blackToe 2'x4' cnc machine is sold as a kit only. We offer plans for the scratch (book) build machine that can be found here for purchase and also comes with a DVD showing the build process: http://www.buildyourcnc.com/cnckitintro.aspx and the plans for build in the book is on the CNC book page: http://www.buildyourcnc.com/Book.aspx.

You can use the same size stepping motors referenced in the book: http://www.buildyourcnc.com/category/elcombo

Click the link to add information to this solution:
I would like to build the 2’x 4’ blackToe2x4v40 CNC router. I have your book. I want to build the latest model blackToe2x4 v40. Are those the correct plans on your web book page ? Is there a bill of materials? If I use a Porter Cable 3-3/4 router motor what size stepper motors do I need?

We do not offer any free plans. We offer the CNC Scratch Build Kit which includes plans to build a CNC machine from scratch. You can find more information about this by clicking on this link https://buildyourcnc.com/cnckitintro.aspx

Additional Information:
WTF!! It says right on your utube page free plans available. I'll paste it from Utube right here.(DIY CNC Router for Under $900 - Free Plans Available) Very misleading, I spent a lot of time looking for this stuff and am lucky I found this because apparently none of its available for free. Very misleading, dishonest sales tactics. I'm sure you've made money conning honest people out of there money but your not gonna get shit from me. After reading what other people here have written, and the fact that you lie about the cost, at least on UTUBE, It is clear your a liar and a piece of shit. carry on though by all means and continue making money being a liar.

Additional Information:
So maybe you should edit your YT post that says you DO have free plans?

Click the link to add information to this solution:
Where can I find the book many of the others have mentioned in their question?

Asia has the biggest population.

Click the link to add information to this solution:
WHICH CONTINENT HAS THE BIGGEST POPULATION?

The settings that will have to be change will be your steps per inch in motor tuning (mach 3), or settings/axes(planetCNC). But we do not have the actual numbers/specs that will fit your 10 TPI 5 start lead screw, here is a tutorial video which explains how to get the exact numbers you need! (

Click the link to add information to this solution:
I just changed my X and Y to the ACME 1/2" 5 start lead screw. What are the motor tuning numbers. I have the book built machine.

What 3d printer do you have?

Additional Information:
whiteant

Click the link to add information to this solution:
HAVE 3D PRINTER THAT WANT TO MAKE CNC ROUTER ,IS THERE ANY GUIDES SHOW ME THE WAY