The plans for the whiteAnt 3D Printer will have the dimesions, and the dimensions will be on the individual pieces(cut to spec). The machine is relatively small, so maybe you expected the size(dimensions) to be larger.

Click the link to add information to this solution:
The plans available for download for the "whiteAnt 3D Plastic Printer" do not have dimensions. Are the dimensions shown in the book? Is there a DWG file available?

You can find the datasheets to our motors be going to the the stepping motor category page https://www.buildyourcnc.com/category/nema and selecting the motor. This will bring you to the product page for the motor and all of the motor information will be found there.

Click the link to add information to this solution:
Do you have the data sheets for the motors so that I can use the dimensions in my model?

Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


Link:
https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

Click the link to add information to this solution:
What are the table dimensions for the greenBull so I can build it.

On the following webpage:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board
there is a diagram with all of the connectors shown. Each connector has the pin number displayed next to the pin. In Mach3 or Mach4, cgo to the plug-ins configuration for the Pokeys57CNC controller and go to the key mappings and select the pin number you would like to use and modify its function by click on the down carat to see all of the available functions.

Click the link to add information to this solution:
I am looking for pin number for the digital input 57cnc, in combination with keymapping. Thanks

Shipping crate size 121" X 36" X 92"

Weight 511 LBS

Click the link to add information to this solution:
WHAT IS SHIPPING DIMENSIONS AND WEIGHT FOR THE VERTICAL LASER.

Shipping crate 121" X 36" X 92"

Weight 511 LBS

Additional Information:
ship in india pls

Additional Information:
International shipping rates can be determined by:
- adding products to the cart
- go to the cart and enter shipped by address
- and pressing the calculate shipping button

Click the link to add information to this solution:
WHAT IS THE SHIPPING WEIGHT AND DIMENSIONS FOR GREENLEAN?

Shipping crate size 121" X 36" X 92"

Weight 511 LBS

Click the link to add information to this solution:
WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER

76" X 40" X 26"
230 LBS

Click the link to add information to this solution:
WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?

Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.


Link:
https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X

Click the link to add information to this solution:
WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?

Mounting the extruder to the whiteAnt can be done a couple of ways. One is to take the 4 mounting holes located at the lower portion of the z-axis rail support and use long screws protruding out. Take a thinner material and drill the four holes matching the locations of the 4 screws and screw on nuts to hold it in place. The other option would be to use the metal bracket and fasten to the edge of the rail support.

Click the link to add information to this solution:
CAN YOU GIVE ME SOME HELP OR POINT IN THE RIGHT DIRECTION TO INCORPORATE MK 7 EXTRUDER WITH BOOK PLANS FOR 3D PRINTER?

The greenBull 4x8 is designed specifically for heavy usage with a larger gantry and 3 large NEMA 34 651oz-in motors on each axis. You can expect superior performance from the greenBull since it is specifically designed for every day production of 4x8 sheets of material.

Additional Information:


Additional Information:
The greenBull response was not an answer to my question. I'd still like to hear from users. There must be some suggestions comments from those that have built the machine?

Additional Information:
Strange that you got the response matching the greenBull answer. That was probably our automated "closest match". I would re-state the question and select the "no, the answer is not related" and let it hang out on the customer service page for a while to see if you get any bites.

Click the link to add information to this solution:
Just getting started with building the "Book Machine". I'm looking for feedback from users. Lessons learned, performance etc.

There is currently no CAD files available with any CNC machines that we currently have on the market.

However for our BYCNC book, we have a pdf file with all the parts you will need to fabricate here: (https://buildyourcnc.com/Documents/CNC%20Kit%201-1.pdf), however some modifications and updates have been made, which you can purchase the new files and DVD here: (https://buildyourcnc.com/cnckitintro.aspx).

Click the link to add information to this solution:
I have the book which has the plans. Are there cad files?

The keyway size for the 3/4" end of this coupling is .1745 inches or 4.4mm. On the 1/2" end of the coupling, the keyway size is .1085 inches, or 2.75mm.

Click the link to add information to this solution:
[518] What is the keyway size? I'm looking for 1/8" width

CP+ to COM
CP- to STEP
CP+ to CW+ (small jumper wire)
CW- to DIR

Additional Information:
If the driver does not have CP or CW labels, the CP is Step and the CW is Direction or DIR. If you connect the 5v to CP+ (or Step+) and CW+ (or DIR+) and the pin to CP- (or Step-) and another pin to CW- (or DIR-), then in software, the configuration for the step on that axis must be active low. Otherwise, if you connect the GND to CP- (or Step-) and CW- (or DIR-) and the pin to CP+ (or Step+) and another pin to CW+ (or DIR+), then in software, the configuration for the step on that axis must be active high.

Additional Information:
If you have a driver that is labeled pul, dir and ena: Pul+ is the Step+ and Pul- is the Step-. Pul is short for pulse. A pulse will create a step. Don't worry about the enable terminals.

On the x-axis, pin #2 can go to pul- and pin #3 can go to dir-. The 5v will go to pul+ and dir+. The configuration for each axis for step will be active low and toggle active low for the dir on each axis to make it go in the direction desired.

Additional Information:


Additional Information:


Additional Information:


Additional Information:

Click the link to add information to this solution:
I am looking for a schematic to wire a C10 BoB to a KL430 driver.

We can special order this part for you. Give us a call and we will either find the part for you, or find a part that we can machine to your specifications.

Click the link to add information to this solution:
HI, I am looking for a drive sproket for a roller chain. The drive sproket should have an ID= 16mm. do you have something like this in your inventory?

Most of our CNC machines have the ability to be customized by length. The greenBull 5X for instance comes standard at 5' x 10' but it is really only the gantry width that is fixed. The length can be easily altered. If you are interested in receiving a custom quote, you can email sales@buildyourcnc.com.

Click the link to add information to this solution:
Do you offer custom sized machines? I am looking for a 5'x5' version.

I will check with some of our suppliers.

Click the link to add information to this solution:
I am looking for a lead screw with a 4mm lead, at least 4 starts and 36" in length, can you help me out?

The only plans we sell for any machine, are the ones that relate to the book we create found here, http://www.buildyourcnc.com/Book.aspx

Here is the link to those plans that we sell, http://www.buildyourcnc.com/cnckitintro.aspx

We do not sell any other plans, only full kits, with or without electronics.

Click the link to add information to this solution:
I am wondering if you also supply plans for the bigger machines, also the vertical CNC that you have in your product range?

Yes, the CNC machine hardware and plans combo is the same machine as in the book. The machine that we provide the plans for, can be found on the website, here http://buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:



Additional Information:

Click the link to add information to this solution:
IS THE CNC MACHINE HARDWARE & PLANS COMBO SHOWN AT LINK YOU LISTED SAME DESCRIBED IN BOOK?