Where are the previously asked questions?

Question #: 864

Question: Where are the previously asked questions?

Current Solution

The recently answered questions have be reworked to show the last 100 questions. To show a more concise view of the questions and answers, only the question is shown and you can hover of the questions to see the answer.

Respond:

Other Possible Solutions to this Question

WHERE ARE THE ELECTRONICS WIRING VIDEOS?
The electronics and wiring videos are located under the tutorials section (click Tutorials on the top menu. The Title is "CNC Electronics and Wiring". The actual link to these videos is: https://www.buildyourcnc.com/CNCElectronicsandWiring.aspx

Additional Information:
You will also find the electronic wiring videos for the USB controller at: https://www.buildyourcnc.com/tutorials/tutorial-Electronics-USB-Interface-Wiring
Click the link to add information to this solution:
WHERE ARE THE ELECTRONICS WIRING VIDEOS?
WHERE ARE THE WIRING DIAGRAMS FOR BLACKTOOTH LASER CUTTER IN INSTRUCTIONS?
You can find the wiring diagrams for the blackTooth on step 105 and 106 on the list of instructions on the blackTooth page. Step 105 pertains to the parallel breakout board and step 106 pertains to the USB interface board.

Additional Information:
wire size
Click the link to add information to this solution:
WHERE ARE THE WIRING DIAGRAMS FOR BLACKTOOTH LASER CUTTER IN INSTRUCTIONS?
WHERE IS GOOD PLACE TO PUT THE E-STOP SWITCH?
Locate the switch as close to where you will normally be as possible and in clear sight.
Click the link to add information to this solution:
WHERE IS GOOD PLACE TO PUT THE E-STOP SWITCH?
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
AND WHAT SIZES ARE THE PACKAGES OF MACHINE.
the package sizes will be listed in your shopping cart, in the item detail. The site will also fully calculate shipping charges directly from the carrier, for each package you purchase.

Additional Information:
Click the link to add information to this solution:
AND WHAT SIZES ARE THE PACKAGES OF MACHINE.
WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE
The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE
MY PARTS ARE COMING OUT THE WRONG SIZE
In Mach3, go to the Settings Tab, and select "Set Steps Per Unit". It will ask you how far to move the machine. Before you do this, make a mark on the table exactly where the end mill is resting. You can do this by lowering the end mill until it touches the material, then spinning it by hand to cut a small dimple in the material. Then, raise the end mill to clear the material, and assign a distance to move the machine. Once the machine moves and stops, measure the exact distance that it actually traveled with a tape measure, and enter this value into the dialog box that asks how far it moved. Mach3 will automatically adjust your steps per unit for that axis to be more accurate. Do this for all axes often to ensure you are cutting accurately. The longer distances you use calibrate, and the more precise you are with your measurements, the better.

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
idwmHJym

Additional Information:
-1 OR 2+78-78-1=0+0+0+1 --

Additional Information:
-1 OR 2+135-135-1=0+0+0+1

Additional Information:
-1' OR 2+886-886-1=0+0+0+1 --

Additional Information:
-1' OR 2+357-357-1=0+0+0+1 or 'xkLzGxAb'='

Additional Information:
-1" OR 2+279-279-1=0+0+0+1 --

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@5fZce

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
MY PARTS ARE COMING OUT THE WRONG SIZE
WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?
The blacktooth ships in 3 boxes.

Structure 38x22x5 #54

Components 14x13x13 #30

Laser Tube 35x7x6 #4
Click the link to add information to this solution:
WHAT ARE THE BLACKTOOTH SHIPPING DIMENSIONS?
WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?
Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.

Link:
https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X
Click the link to add information to this solution:
WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?
WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?
76" X 40" X 26"
230 LBS
Click the link to add information to this solution:
WHAT ARE THE SHIPPING DIMENSIONS FOR GREENBULL?
WHAT ARE THE ROLLER CHAIN LENGTHS FOR GREENBULL 4X
The roller chain lengths for the greenBull 4x is:
- 13 feet for each side of the X axis (total of 26 feet), and
- 6 feet for the Y-axis
Click the link to add information to this solution:
WHAT ARE THE ROLLER CHAIN LENGTHS FOR GREENBULL 4X
WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER
Shipping crate size 121" X 36" X 92"

Weight 511 LBS
Click the link to add information to this solution:
WHAT ARE THE SHIPPING DIMENSIONS FOR VERTICAL LASER
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?
If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.
Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?
WHICH WIRES ARE CONNECTED TO THE EMERGENCY STOP BUTTON
You can use one of the terminals on the input side of the breakout board to connect the e-stop switch.

Additional Information:
Click the link to add information to this solution:
WHICH WIRES ARE CONNECTED TO THE EMERGENCY STOP BUTTON
WHAT ARE THE BEST FOODS THAT WILL HELP YOU LOSE WEIGHT?
Lettuce, or any vegetable. Also drink a cup of water before meals, it'll make you feel fuller.
Click the link to add information to this solution:
WHAT ARE THE BEST FOODS THAT WILL HELP YOU LOSE WEIGHT?
THE MOTORS ARE NOT TURNING
Make sure you follow the tutorial here: http://www.buildyourcnc.com/CNCElectronicsandWiring.aspx
Click the link to add information to this solution:
THE MOTORS ARE NOT TURNING
WHAT ARE THE OUTPUT INVERTER (VFD) CONNECTIONS TO SPINDLE?
U - Pin1
V - Pin2
W - Pin3
Pin4 Dead

Additional Information:
My home made cnc is a big problem with my NC connection. When in start my spindle it will be gone wrong. It will be limith switch problem anytime. Need help thanks.

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT ARE THE OUTPUT INVERTER (VFD) CONNECTIONS TO SPINDLE?
WHAT ARE THE HEALTH RISKS OF LIVING NEAR A CELL PHONE TOWER?
There is very little radiofrequency (RF) energy exposure to people inside a building from a cellular base station located on its roof. There are several reasons for this. First, the transmitters operate at low power levels. Second, the antennas are normally mounted near the edges of the roof and are aimed away from the building. Third, most cellular transmitters use "high gain" or panel antennas. Such antennas transmit most of their energy in a narrow beam (in the vertical direction) from their front surfaces, away from the building. They radiate very little energy downwards towards the roof or backwards from their rear surfaces. Finally, building materials absorb a significant fraction of the RF energy passing through them. As a result, the RF signal levels at any location inside the building are invariably low and far below safety limits. The situation might be different in some locations on the roof itself. RF signal levels close to (within a few feet) and directly in front of cellular base station antennas can easily exceed safety limits. Some precautions are needed to prevent people from walking directly in front of the antennas while they are transmitting. This applies also to paging and other systems that use rooftop antennas, some of which transmit at higher power levels than many cellular base stations. Kenneth R. Foster, Ph.D.
Click the link to add information to this solution:
WHAT ARE THE HEALTH RISKS OF LIVING NEAR A CELL PHONE TOWER?