You can determine if the country is serviceable by:
- selecting the items you want to purchase on the website
- go to the cart (shopping cart top left of any webpage)
- log in, or register
- Enter the address and click on calculate shipping.

The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

Click the link to add information to this solution:
Hi, very interested by your products to build my own CNC, I'm french, Can you deliver to France ? Thanks.

Gcode or digital files are not available for our machines.

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I have the build your own CNC kit 3 Axis CNC Machine 2008, were can I get the Gcode or vector files for it ? I wanted to have it laser cut

Yes, we can supply the parts for a machine that will turn pipes so they can be cut as they are turning. Are you intending the machine to cut using a milling process, or a plasma process?

Click the link to add information to this solution:
I want to cut the ends of steel pipes circularly as preparation for welding by plasma cutter , can you supply small machine?

Sure, come on by! You can come and see some of our machines in action; pose difficult questions and hopefully we can answer them; and even have some tests done with stuff you bring.

Click the link to add information to this solution:
I am in Houston. I will use this to make cabinets. Do you have a location I could see one in use cutting similar products?

Yes, it is feasible to create a machine with a cutting area of 13'x15'. Your mechanical and structural systems will need to be able to span a bit more than the 13' if that will be the axis travel along the gantry.

We have not cut carpet with our lasers, but I don't see why not. With that said, be extremely careful with the materials in the rug. Read the MSDS (Material Safety Data Sheet) for the rug you intend to cut as some materials will emit corrosive and harmful gases and chemicals when lased.

Click the link to add information to this solution:
Hi I want to build a cnc laser table 13'x15' cuttting area. Is this feasible. Also would the 80watt laser be enough power to cut through carpet

As long as you have enough air blowing at the cutting location, you shouldn't have a problem with charring. A 40 watt laser should be able to cut through 4 ply chipboard.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
is the 40W blacktooth laser cutter strong enough to cut through 4 ply chipboard with out horrifically burning/charring the edges? If you havent tried mabye you could as this is a must for anyone who will be using it to build architectural models. I would rather have this pre-verified before I give $2100 to have you build one

Please call during business hours 9 AM through 5 PM Central Standard Time and you phone call will be answered. If it is not answered it is likely because there is another customer on the line. If you have left a voice mail, it will be returned once we are notified of it. Thank You

Click the link to add information to this solution:
I would like to speak with someone about your products. I have called and left voice mails.

A CO2 laser will not be suitable for cutting steel. You would likely need a very powerful fiber laser to cut steel, and even then you have to take into consideration the reflective properties of steel which can pose danger to the machine.

Click the link to add information to this solution:
Trying to cut 24, and 26 G steel sheets in various shapes. Will CO2 laser be enough? And will it cause alot of heat in the product?

If you would like to add a laser to a plasma table, you will need the following parts:

Laser tube at 40 watts:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Tube-CO2-40Watt

Mirror mounts (this will depend on the way you mount the laser tube):
https://www.buildyourcnc.com/item/Laser-Component-Mirror-Mount-20mm

Mirrors for the mirror mounts:
https://www.buildyourcnc.com/Item/Laser-component-20mm-mirror-25mm

Laser Tube Power Supply:
https://www.buildyourcnc.com/item/Laser-Component-Power-Supply-CO2-40W

Laser Focus Lens:
https://www.buildyourcnc.com/item/laser-component-20mm-lens-2-inch-50!80mm

Mirror and Lens Mount and Nozzle:
https://www.buildyourcnc.com/item/Laser-Component-Nozzle-20mm-lens-mirror

High Tension Extension Cable:
https://www.buildyourcnc.com/item/Laser-component-Power-Supply-High-Tension-extension-wire

Laser Control System:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System

Screw Posts (to connect the high tension and return wire to the laser tube, highly recommended as the leads on the laser tube are fragile):
https://www.buildyourcnc.com/item/laser-component-newbiehack-connectors-screw-terminal-binding-post

Safety Eyewear for CO2 laser wavelength:
https://www.buildyourcnc.com/item/laser-components-goggles-safety-tinted

Click the link to add information to this solution:
I have an Eagle Plasma table and I want to add a 40 laser. Can you supply me a list of what I need to make this happen.

For the blackTooth laser cutter and engraver, it is not possible to lengthen within its existing enclosure dimensions. The cable management is a bit tight. Call us to discuss.

Click the link to add information to this solution:
I am interested in your laser cutter package. Can you create a machine with custom length requirements? ie. 36" length

BYCNC Response:
The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

User Response:
I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

BYCNC Response:
It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

Click the link to add information to this solution:
I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

The blackTooth machine, as it is designed cannot be modified easily as the box within which it is contained also serve as its structure. We are currently designing a special mount for the greenBull (for the 40 watt tube) which will provide 5'x10' or 6'x12' work area and the machine is far less expensive than comparable 4'x8' laser systems. We are also developing a 4'x8' 80 watt system where the tube is in the horizontal orientation. More information can be found in the R&D section.

Click the link to add information to this solution:
I am interested in getting your 40W laser system. How difficult will it be to increase the size to 48" x 48"?

The laser tube is a consumable item in all CO2 lasers, unless the laser tube can be recharged. My laser tubes will most likely work as long as the mouts are the same size. Let me know the mount diameter and the length of space for the tube in the Epilog Laser Cutter and Engraver and I will let you know.

Additional Information:
My Epilog Summit (3.3) only works from Windows Millenium and 98. Notconsistently from WXP, but sporadic raster and vector combined does happen. I can't get it to work right w XP through Harvard Draw, Corel,Image Folio, Stika, DrawMagic or anything else I have. But Millenium isOK except for the advanced mapping to colors function is very difficult.When it does rarely accept a graphic from my XP system from CorelDrawEssentials or 8.0, it will allow complete control for photo etching -speed, power and shade mapping. It is the same driver for both mysystems but the control panel page looks different in the 2 computers. The laser takes 45 seconds to initialize after power on. You can use a USB to Parallel adapter cable for your laptop or modern computer connection. The laser needs the old style printer connection. Test your laser by holding all 3 power/focus/speed buttons until homed. Close the lid. "Online" for lase, any other button for laser off. Should be an audible beep every few seconds while your laser is functioning. This is not a motion test -only laser firing.

Click the link to add information to this solution:
I have a 25 watt Epilog Summit Model 2000/25 laser engraver. I believe my tube is going bad due to limited vector cutting and no raster. Do you think there is a way to retrofit with your products to make it work well. Mirrors are new and mechanical is good. Thanks.

The largest CNC machine we make at this time (12/04/2015) is the GreenBull 6'x12' model. This model has 2 options for Z-axis travel.

The short-z option has a total Z travel of 5.75 inches. From that you would subtract the length of the end mill used and the thickness of the spoil board to determine the maximum material thickness. (Example: If the end mill extends 1.25" from the collet and the spoil board is .75", then the material could be up to 5.75 - 1.25 - 0.75 = 3.75 inches in thickness). This is good for most sheet-type materials.

The long-z option, used mainly for large 3D carvings, requires a custom frame and allows for up to 36" of travel.

The tolerance of our machines, like any machine, depends on several variables. The major variables include the manufacturing tolerance, the type of machine control used, the precision of assembly, the thoroughness of maintenance, and the initial and ongoing calibration of the machine. Because we sell kits only most of these variables are outside our control. Therefore, we are hesitant to guarantee a certain level of tolerance for an end user. However, in our experience, tolerances of .001" are readily achievable with our machines.

Additional Information:

Click the link to add information to this solution:
What tolerance can I expect from your largest cnc machine and the laser cutter? Also, what depth can I get on the z axis?

I do believe the financing is available for those outside the US but let me make sure.

Click the link to add information to this solution:
I was referred to your company by a friend who uses your products and i notice you have finance / lease options, are these available to people outside the United States? Im located in Canada

BYCNC Response:
The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

User Response:
I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

BYCNC Response:
It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

Click the link to add information to this solution:
I bought your book and was hopeing it had plans or dimentions on how to build a cnc to hold a 4x8 sheet of ply. Will the CNC in the book scale up?

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

The USB controller will only work with the Planet-CNC software. This software is well made and will provide great functionality. The planet-cnc software delivers instructions to the microcontroller on the board and the microcontroller will send out the pulse trains needed to move the machine correctly.

There are two main alternatives if you want to use the mach3 software:
First, get a parallel port card and add it to your computer and get a parallel breakout board. If you have a laptop/notebook computer, this will not be possible.
Second, if you have a laptop, or really want to use the USB as the main interface for controlling the machine, you will need to get the smoothstepper board which works with mach3. The price combination is much higher than the USB controller with planet-cnc, but will work with Mach3.

Additional Information:


Additional Information:


Additional Information:
The planet cnc controller can be prone to electrical interference and has been known to cause such problems. In the first instance try to use a quality double sheilded USB cable, hopefully this will fix your problem. Alternatively you may need to sheild your limit switch, estop and or motor cabling. My pick is that a quality USB cable will fix it though, worked for me.

Click the link to add information to this solution:
I have your USB controller sitting here and want to control it with something other than PlanetCNC control software?

We do not currently provide any plans for our machines. We do provide a scratch build kit with plans, DVD, and hardware. You can find it here https://www.buildyourcnc.com/cnckitintro.aspx

Additional Information:
WE are a technical school and would like to build a laser cutter for the school that can cut up to 6mm plate please help us ti find drawings to build it

Click the link to add information to this solution:
blacktooth cnc laser plans, are they available? I would like to build my own parts. are there 3D cad files available?