[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 3579

Question: I am interested in your laser cutter package. Can you create a machine with custom length requirements? ie. 36" length

Current Solution

For the blackTooth laser cutter and engraver, it is not possible to lengthen within its existing enclosure dimensions. The cable management is a bit tight. Call us to discuss.

Respond:

Other Possible Solutions to this Question

  • I am interested in buying Laser Cutter/Engraver with Integrated Computer, so can you please let me know if your offer still stands?

    The (blackTooth) laser cutter and engraver comes with the unit shown on the product page seen here: https://buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx

    The unit is intended to be set on a table top.

    The stand that you may have noticed was only a demonstration on how to use SketchUP in a CNC process scenario. The stand has never been offered with the blackTooth laser.

    Click the link to respond:
    I am interested in buying Laser Cutter/Engraver with Integrated Computer, so can you please let me know if your offer still stands?

  • I am interested in purchasing your 4 axis combo package. Is it compatible with MeshCam

    Our electronics and machines are compatible with all non-proprietary CAM programs. MeshCAM is a standard CAM package so it will work with our equipment. The electronics are more related to the control program (such as Mach3, LinuxCNC, etc) that you select for the machine rather than the CAM program.

    Click the link to respond:
    I am interested in purchasing your 4 axis combo package. Is it compatible with MeshCam

  • What tolerance can I expect from your largest cnc machine and the laser cutter? Also, what depth can I get on the z axis?

    The largest CNC machine we make at this time (12/04/2015) is the GreenBull 6'x12' model. This model has 2 options for Z-axis travel.

    The short-z option has a total Z travel of 5.75 inches. From that you would subtract the length of the end mill used and the thickness of the spoil board to determine the maximum material thickness. (Example: If the end mill extends 1.25" from the collet and the spoil board is .75", then the material could be up to 5.75 - 1.25 - 0.75 = 3.75 inches in thickness). This is good for most sheet-type materials.

    The long-z option, used mainly for large 3D carvings, requires a custom frame and allows for up to 36" of travel.

    The tolerance of our machines, like any machine, depends on several variables. The major variables include the manufacturing tolerance, the type of machine control used, the precision of assembly, the thoroughness of maintenance, and the initial and ongoing calibration of the machine. Because we sell kits only most of these variables are outside our control. Therefore, we are hesitant to guarantee a certain level of tolerance for an end user. However, in our experience, tolerances of .001" are readily achievable with our machines.

    Click the link to respond:
    What tolerance can I expect from your largest cnc machine and the laser cutter? Also, what depth can I get on the z axis?

  • i want to make a cutter laser machine with 4kwatt power so i want to buy all this laser components can you list the parts and cost thanks

    We can lower the price for just the hardware and also for the structure. However we do not have any files, dimensions, for public access.

    Additional Information:
    Would there be any/enough measurement or info on the instructions to extrapolate the dimensions? What would the new pricing be?

    Click the link to respond:
    i want to make a cutter laser machine with 4kwatt power so i want to buy all this laser components can you list the parts and cost thanks

  • am interested in purchasing the 80 Watt Vertical Laser XL 4'x8' Laser Cutter and Engraver, what material depth can it cut?

    The Vertical Laser XL's 80 watt CO2 laser tube is capable of cutting lighter material such as wood and plastic at up to 1/2" or 12mm.

    Click the link to respond:
    am interested in purchasing the 80 Watt Vertical Laser XL 4'x8' Laser Cutter and Engraver, what material depth can it cut?

  • Do you sell the 5x10 or 5x12 machines fully assembled complete with spindle that will do detailed signs in wood. We have very large eastern red cedar are interested in producing custom signs etc.

    Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

    Our machines are as follows (in order by size, larger at top):

    The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
    https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

    The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
    4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
    5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
    6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

    The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
    This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
    https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

    The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
    https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

    The 4'x8' blackFoot CNC Router:
    This machine requires a table to be built by the customer.
    https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

    The 2'x4' blackToe CNC router fully assembled complete with table:
    https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

    The blueChick CNC Router fully assembled completel with table:
    https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

    Click the link to respond:
    Do you sell the 5x10 or 5x12 machines fully assembled complete with spindle that will do detailed signs in wood. We have very large eastern red cedar are interested in producing custom signs etc.

  • Hi im interested in your new 4 x 8' laser , what is the thickest mdf sheet it can cut through ?

    We have not specifically tested for this data point, but a general rule of thumb is that an 80W CO2 laser can cut wood up to about 1/2 inch. Actual results depend on a number of variables -- power level used, amount of air assist, focal length of lens, number of passes, cutting speed -- and each of those has its own tradeoffs. We are planning to do some of these tests in the near future and post the results, so stay tuned for more in depth information.

    Click the link to respond:
    Hi im interested in your new 4 x 8' laser , what is the thickest mdf sheet it can cut through ?

  • I am interested in getting your 40W laser system. How difficult will it be to increase the size to 48" x 48"?

    The blackTooth machine, as it is designed cannot be modified easily as the box within which it is contained also serve as its structure. We are currently designing a special mount for the greenBull (for the 40 watt tube) which will provide 5'x10' or 6'x12' work area and the machine is far less expensive than comparable 4'x8' laser systems. We are also developing a 4'x8' 80 watt system where the tube is in the horizontal orientation. More information can be found in the R&D section.

    Click the link to respond:
    I am interested in getting your 40W laser system. How difficult will it be to increase the size to 48" x 48"?

  • Can I cousult with you on the cnc package I'm interested in?

    Consulting our sales dept, or employee, For a specific package that you might want to inquire about, please email customerservice@buildyourcnc.com for further assistance.

    Click the link to respond:
    Can I cousult with you on the cnc package I'm interested in?

  • Hello, I'm interested in GreenBull 5'x10' CNC machine kit with 40W laser head. Is it possible to receive an offer for this size cnc machine kit with all the mechanics, electronics and laser parts, but without all the wooden parts? We would like to build this kind of laser cutter machine with metal frame and parts. And is it possible also to get 3D drawing for machine? Waiting for your answer.
  • I am interested in the "Design Your CNC" page. However I need an extra long table. Is there any possibility of designing a custom 2' x 16' CNC, or can two 2' x 8' tables be combined some how?

    Yes, we can customize almost any size of a machine. 2'x16' is within the possible dimensions. For a customized machine that you do not see in the "Design Your CNC" section, you will need to contact customerservice@buildyourcnc.com and make the request there.

    Click the link to respond:
    I am interested in the "Design Your CNC" page. However I need an extra long table. Is there any possibility of designing a custom 2' x 16' CNC, or can two 2' x 8' tables be combined some how?

  • I am looking at buying the blacktooth-laser-cutter-engraver-40w. Can you give me some idea of the types and thickness of material this machine will cut and/or ingrave?

    Considering that "materials being lased by may emit gasses that are harmful to humans (corrode human tissue and cause damage to respiratory organs). Always read the MSDS (Material Safety Data Sheet) for the material to be lased. You can find these MSDS from manufacturer websites for the material you are considering for use in the laser system."
    We successfully have worked on Thin sheets of Brasswood, glass, foam, plexi-glass. The thickest materials you will be able to successfully cut is 1/4".

    Click the link to respond:
    I am looking at buying the blacktooth-laser-cutter-engraver-40w. Can you give me some idea of the types and thickness of material this machine will cut and/or ingrave?

  • Hi i am interested in the greenBull 6x with Hybrid Laser/Spindle Head (includes Spindle/VFD and Laser Components) - USB Interface (Long Z). I was wondering how much it would cost to get this machine to NZ?

    You can use our shopping cart to determine the shipping. Add the machine and the parts you want to purchase, enter your shipping address and click on the Calculate Shipping Button to get a price for shipping. The shipping charges are determined directly from the carriers at the time of pressing that button.

    Additional Information:

    Click the link to respond:
    Hi i am interested in the greenBull 6x with Hybrid Laser/Spindle Head (includes Spindle/VFD and Laser Components) - USB Interface (Long Z). I was wondering how much it would cost to get this machine to NZ?

  • I am interested in order the redleaf system you talked about for my machine, tried calling and mail box is full, no answer. How do I contact you?

    Call again. Most likely, one of my employees were on the line with another customer at the time you called.

    Click the link to respond:
    I am interested in order the redleaf system you talked about for my machine, tried calling and mail box is full, no answer. How do I contact you?

  • I am interested in the GreenBull 4x8 CNC machine kit you have; I also wish to get the laser attachment but I was wondering if its possible to have the laser larger than a 40w, say in the 80-150w range?

    Currently our greenBull can only accommodate a 40W laser tube due to the size and current mounts on the spindle/laser hybrid assembly!

    However please contact 281-815-7701 for further assistance with the greenBull machine.

    Click the link to respond:
    I am interested in the GreenBull 4x8 CNC machine kit you have; I also wish to get the laser attachment but I was wondering if its possible to have the laser larger than a 40w, say in the 80-150w range?

  • I would like to build a low cost laser engraver/ cutter, can your 40w laser power supply be controlled with an arduino or is it only controlled by the controller sold here?

    You can control our 40W laser power supply (which controls the laser tube) with an Arduino, if that is your intention. The trigger for turning the laser on and off uses a 5V level. To control intensity, you can use the Arduino PWM output. If you want the Arduino to move the machine as well (providing pulse trains to each of the stepper motor drivers) then you will need to make sure you consider the processing speed of the Arduino so you will be able to run the stepper motors at the speed you need for the laser engraving/cutting.

    Our laser controller do all of these functions. Here is a link to our laser control system:
    https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System



    Additional Information:
    Thank you! I am building a 3 axis cnc/ engraver and I think this would be a good option as well as the router head and the 3d printing head. How heavy is the tube? I may mount it directly onto one of the axis of the machine to eliminate the need to line up all three axis, similar to what you have with your xl engraver.

    Additional Information:
    The tube isn't that heavy, but when filled with water, it can get up to a few pounds. The key is to use the axis moving the nozzle for engraving as this requires fast back and forth motion. The cutting is generally dependent on the axes moving from vector to vector at a relatively slow motion, so this is not a problem.

    Click the link to respond:
    I would like to build a low cost laser engraver/ cutter, can your 40w laser power supply be controlled with an arduino or is it only controlled by the controller sold here?

  • with the bigfoot 4x8 machine does it come with the table? Would be hard to find a piece of material to fit the requirements of the gantry. a split table would not be as acurate.

    We do not currently provide table options for our large format CNCs (blackfoot and greenbull). It is recommended that you construct your own table to keep overall cost low. We recommend using a sacrificial board (spoilboard) and making sure it is surfaced properly (completely level).

    Click the link to respond:
    with the bigfoot 4x8 machine does it come with the table? Would be hard to find a piece of material to fit the requirements of the gantry. a split table would not be as acurate.

  • Can the Planet CNC USB controller be used with a laser engraver/cutter? Can the build your own CNC based on the Planet CNC USB controller accept a Laser head instead of a router?

    The PlanetCNC USB software, like most machine control software, can be used to control a laser engraver/cutter. The typical modification is to use the Z axis down signal to fire the laser, analogous to an endmill cutting into the workpiece from an initial position above it.

    For the second question, it is important to note that BYCNC machines are not based on PlanetCNC software, or any other particular machine control system. The machines themselves will accept standard signals from a wide variety of machine control systems, not just PlanetCNC or Mach3. This allows maximum flexibility for the customer to choose their own preferred software for this part of the toolchain.

    That said, our machines will accept a laser head either in lieu of or in addition to a spindle. Here is an example of a combination spindle/laser mount for our greenBull machine: https://buildyourcnc.com/item/cnc-machine-laser-spindle-combo-head. We have all the parts you would need to add laser functionality to your machine here: https://buildyourcnc.com/LaserComponents.aspx, if you feel comfortable assembling your own package. Also, feel free to contact our sales department for a quote if you need a custom assembly.

    Click the link to respond:
    Can the Planet CNC USB controller be used with a laser engraver/cutter? Can the build your own CNC based on the Planet CNC USB controller accept a Laser head instead of a router?

  • How can I convert from Xylotex to yours, four axis with limit switches. Have parallel PC and steppers on machine.

    Sure, the USB interface has a place for 4 axes of limit switches.

    Each axis can have two limit switches: one for the ++ (positive) end and one for the -- (negative) end. The positive end would be the limit switch at the end of the machine that, say the machine has a 4'x8' area, reaches a bit after the 8 foot mark. The negative end would be the limit switch behind the 0 foot location behind the origin. If the origin is in the middle, the negative would be at a little more than the -4 foot end and the positive would be at a bit more than the +4 foot end. Note that you can have more than one switch on each pin where the NC is connected in serial fashion and the NO is connected in parallel fashion (this can be seen on the diagram in the multiple limits switch section). The software configurations for the limits switches are under File -> Settings -> Limit.

    A typical limit switch has three connections on it. These connections consist of COM (common), NC (normally closed) and NO (normally open). The COM would generally go to GND and the NC or the NO would go to the pin. If the NC is used, then the the switch is constantly connected until the switch is pushed (engaged) then the connection from the pin to gnd is broken (open). Use the settings in software to set whether in NC or NO configuration.

    Let me know if this information was helpful (or not) by adding information to this question. Thanks.

    User response:
    Thank you very much for this helpful information. I'm still a little fuzzy on how the 6 limit switches physically connect to each other and to the USB breakout board. You've stated one switch (home) goes to positive and another switch (limit) goes to negative. Are all the GND prongs from all 6 switches connected to each other and going to GND on the breakout board, or no? And the NC prongs, how exactly are they connected to each other? And to the board? There has to be a diagram somewhere shows this visually, no? I don't know how to wire the switches in series or in parallel. I have already physically installed all the switches on the machine and ran the wires to where the board is. Now I just need to know where to plug these wires into the board. Also, taking into consideration that I'm using the Planet CNC software, the only settings I have pertaining to limit switches is "Enable/Disable" for each axis, and the actual limit for each axis. Nothing about NC or NO. Is that only in Mach3?
    Thank you.

    buildyourcnc response:
    On the USB interface, the COM on the switch connects to GND and the NC or NO connects to the input pin (i.e. x++, y--, etc.)

    Limit switch configuration is rather difficult to understand, especially with series and parallel. You can think of series as a single wire going from GND to the axis letter input terminal (i.e. X++ or X--). If the wire is broken, then the circuit is open (or the switch is engaged in a normally closed scenario). Normally closed is like an actual wire, and when engaged, the switch "opens" (breaks the wire). This is why we recommend in some systems that you can put many switches in series on a single pin. When one of the switches is engaged (breaking the connection) then the entire circuit of switches is broken and the machine stops.

    In a parallel scenario, the state of the circuit is always broken until the one of the switches is engaged and the circuit is then closed or connected. The topology looks like a ladder. All the switches connect to both sides of the ladder and the switches are like the runs of the ladder (the horizontal bars that the feet are placed while climbing). Imagine all of the switches broken in this scenario (normally open). It would be like the ladder could be split in two, but if one of the ladder runs (switches) is closed by engaging it, then that run would connect both sides of the ladder and the two sides of the ladder would have a connection.

    There is a diagram on the USB page of the various limit switch configurations. If you need more information (visual and/or otherwise), please let us know and we will immediately add that information to benefit everyone.

    Click the link to respond:
    How can I convert from Xylotex to yours, four axis with limit switches. Have parallel PC and steppers on machine.