Call again. Most likely, one of my employees were on the line with another customer at the time you called.

Click the link to add information to this solution:
I am interested in order the redleaf system you talked about for my machine, tried calling and mail box is full, no answer. How do I contact you?

You can use our shopping cart to determine the shipping. Add the machine and the parts you want to purchase, enter your shipping address and click on the Calculate Shipping Button to get a price for shipping. The shipping charges are determined directly from the carriers at the time of pressing that button.

Additional Information:


Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Hi i am interested in the greenBull 6x with Hybrid Laser/Spindle Head (includes Spindle/VFD and Laser Components) - USB Interface (Long Z). I was wondering how much it would cost to get this machine to NZ?

Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Additional Information:
Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens and nozzle. You will also need some mechanical parts and some motors, drivers and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

Yes, if you want a laser on the machine, I would highly suggest that the laser be mounted on a separate gantry, similar to the following image:
https://buildyourcnc.com/images/machineConfigurations/greenBullV2_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_nolaser_f4_wilaserready_.png

You would need to develop the gantry structure, but you can use this thread to work out the design with my guidance.

You will need a laser tube, laser power supply, laser controller, mirrors, mirror mounts, lens, and nozzle. You will also need some mechanical parts and some motors, drivers, and power supplies for the drivers and the controller.

Click the link to add information to this solution:
I'm interested in getting the CO2 laser & Spindle for my Blackfoot - I currently have just the router mount. Do you sell complete kits or can you advise on what I need? Thank you

For the blackTooth laser cutter and engraver, it is not possible to lengthen within its existing enclosure dimensions. The cable management is a bit tight. Call us to discuss.

Click the link to add information to this solution:
I am interested in your laser cutter package. Can you create a machine with custom length requirements? ie. 36" length

Yes, I can furnish the redFly system without motors. You can request a quote for this at customerservice@buildlyourcnc.com

Click the link to add information to this solution:
[422] I'm interested in using Mach4 and already have 3 motors (425 oz-in). Is it possible to get a electronics system without the motors?

The Vertical Laser XL's 80 watt CO2 laser tube is capable of cutting lighter material such as wood and plastic at up to 1/2" or 12mm.

Click the link to add information to this solution:
am interested in purchasing the 80 Watt Vertical Laser XL 4'x8' Laser Cutter and Engraver, what material depth can it cut?

Yes, we can customize almost any size of a machine. 2'x16' is within the possible dimensions. For a customized machine that you do not see in the "Design Your CNC" section, you will need to contact customerservice@buildyourcnc.com and make the request there.

Click the link to add information to this solution:
I am interested in the "Design Your CNC" page. However I need an extra long table. Is there any possibility of designing a custom 2' x 16' CNC, or can two 2' x 8' tables be combined some how?

The (blackTooth) laser cutter and engraver comes with the unit shown on the product page seen here: https://buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx

The unit is intended to be set on a table top.

The stand that you may have noticed was only a demonstration on how to use SketchUP in a CNC process scenario. The stand has never been offered with the blackTooth laser.

Click the link to add information to this solution:
I am interested in buying Laser Cutter/Engraver with Integrated Computer, so can you please let me know if your offer still stands?

If you were to buy all of that, only thing you'll need is the mach3 software to run the machine.

Click the link to add information to this solution:
I am interested in purchasing the Green Lean complete kit and also buy the ArtCamPro what other software will I need to up and running?

The weight of the 2.2kW spindle without the VFD (variable frequency drive or inverter) is 11 lbs or 5 kg.

The 2.2kW spindle with the VFD is 15 lbs or 6.8 kg.

Additional Information:

Click the link to add information to this solution:
I am interested in buying the water cooled 2.2 KW spindle for $339, how much does it weigh?

With our machines the ipm capable is very dependent on the bit/end mill (the more flutes you have the faster the material will be cut) you are using as well if it is with a router or a spindle, as well as the density of the material. If those items are taken into effect reaching 400 ipm would not be a problem with the greenLean/other machines equipped with our 2.2 kW spindle, and a decent end mill.

Click the link to add information to this solution:
Interested in the greenLean -- I need to be able to achieve 400 ipm on plywood-- is it possible?

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

Our blackToe will work with R/C models, and can cut plywood, acrylic, foam, light sheets of aluminum. The gantry mass is not too dependent where you will see a significant accuracy loss that will not work with cutting small notches or small detailed parts, but depending on your CAD/CAM software and how accurate you specify the design it would be best if you create it in sections where you can change the endmill to a finer detailed bit when needed.
Also dealing with our CNC machines the accuracy is in the thousandths of an inch (0.001).
Dealing with small notches, you will most likely be better off using a small endmill/cutter, for very fine detailing (ex. a 1/8" endmill or a 1/32" endmill).

Click the link to add information to this solution:
I'm interested in one of your BlackToe kits. Will it cut plywood R/C airplane wing ribs accurately, including the small notches for spars and sheeting? I've heard gantry mass is too high, and causes the small notches to not be cut accurately.

Our MAch3 USB interface boards can be located here:

https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Click the link to add information to this solution:
I AM INTERESTED IN THE 3 AXIS COMBO USB OPTION. NOTICE YOU ENDORSE PLANET-CNC FOR USE WITH THIS BUT WILL MACH3 INTERFACE WELL BEAK OUT BOARD?

Our electronics and machines are compatible with all non-proprietary CAM programs. MeshCAM is a standard CAM package so it will work with our equipment. The electronics are more related to the control program (such as Mach3, LinuxCNC, etc) that you select for the machine rather than the CAM program.

Click the link to add information to this solution:
I am interested in purchasing your 4 axis combo package. Is it compatible with MeshCam

BYCNC Response:
The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

User Response:
I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

BYCNC Response:
It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

Click the link to add information to this solution:
I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

With our blackTooth kit, if you were to go with our lowest cost machine being $1700. With the parallel breakout board the best new beginner programs you can use, would be Mach 3 and ArtCAM, since it is a good program for beginning users.

Now if you feel a little comfortable with CAD/CAM, I would recommend CAMBAM and is a good overall software since it has a large design screen which allows you to view your design more clearly.

Additional Information:


Additional Information:
I want to avoid the Parallel Port option and go with USB. In that case, is Planet-CNC Software, and ArtCAM the best combination? Does Planet-CNC do the same thing as Mach 3 only with different physical ports?

Click the link to add information to this solution:
I'm interested in buying your blacktooth laser engraver for cutting out inlays on woodworking projects. I am new to laser engraving/cutting, and CAD. What is the simplest beginning software setup available to allow me to cut 2D shapes and letters for inlay work?

Currently our greenBull can only accommodate a 40W laser tube due to the size and current mounts on the spindle/laser hybrid assembly!

However please contact 281-815-7701 for further assistance with the greenBull machine.

Click the link to add information to this solution:
I am interested in the GreenBull 4x8 CNC machine kit you have; I also wish to get the laser attachment but I was wondering if its possible to have the laser larger than a 40w, say in the 80-150w range?