It is out of stock at this time (12/14/2018). We are awaiting shipment.

Additional Information:
The rail is now back in stock.

Click the link to add information to this solution:
HIWIN Rail out of stock

The HIWIN rail we stock are part number HGR20 series. 20mm guide length.

Click the link to add information to this solution:
What are the Part numbers / specs for the HIWIN Rails? HG series? RG Series?

The HIWIN rails come with the same flange blocks that are sold individually.

Click the link to add information to this solution:
About your HIWIN rails. What Carriage block does the 78" rails come with, 2 flange or 2 with no flange?

Yes, however, if you are needing a length of the HIWIN specification rail longer than our 78" max length, then you can abut more than one rail together to increase the length of the rail. We do this for our long X-Axis travels on our Fabricator pro machine.

Click the link to add information to this solution:
I would like some longer HIWIN rails and ballscrews for my x-axis, 9 feet or 108 inches. You list maximums as 78 inches.

Yes, we sell rails with HIWIN specification. Our HIWIn spec rails are interchangeable with HIWIN brand rails.

Here is the link for our per inch product page.
https://www.buildyourcnc.com/item/mechanical-rails-HIWIN-Linear-20mm-Guide-Rail

Click the link to add information to this solution:
Do you sell the HIWIN rail sections without guide blocks?

t's actually pretty difficult to cut the HIWIN rail with a hacksaw since the rail is hardened. We use a cut off saw with an abrasive blade.

Click the link to add information to this solution:
Is it possible to cut HIWIN rail to length with a hacksaw?

Select the desired rail here:
https://buildyourcnc.com/Item/mechanical-rails-HIWIN-Linear

On the product page, enter the total "cut to order" length (in inches). Then call us to specify the cut lengths. Remember that our maximum length is 2000mm or 78.74 inches.

Our phone number is located at the top right of each web page by hovering over the "Need Help?".

Click the link to add information to this solution:
how do I order multiple lengths of HIWIN guide rail with blocks?

That is difficult to tell at this time. Right when we get them in, they go fast. These items come from China and the units are shipped in via freight on ship, so there are many factors on the delivery such as weather.

Click the link to add information to this solution:
When will the 2000 mm HIWIN Spec Linear Guide rail be available?

We don't have cad models of the HIWIN blocks, but you can find the models on McMaster.com. They have can drawings and models for most of these types of parts.

Click the link to add information to this solution:
DO YOU HAVE CAD AVAILABLE FOR THE HIWIN GUIDE BLOCKS SELL AND RAIL?

We don't have cad models of the HIWIN blocks, but you can find the models on McMaster.com. They have can drawings and models for most of these types of parts.

Click the link to add information to this solution:
DO YOU HAVE CAD AVAILABLE FOR THE HIWIN GUIDE BLOCKS SELL AND RAIL?

Hawaii is located in the Pacific Ocean.

Additional Information:
Which ocean is iat in hawaii

Additional Information:
What´s the capital city of hawaii

Click the link to add information to this solution:
IN WHICH OCEAN HAWAII?

Sahara desert

Click the link to add information to this solution:
THE BIGGEST DESERT IN WORLD

This video will illustrate how to test for laser power:

Click the link to add information to this solution:
LOSE POWER IN MY LASER TUBE

In Mach3, go to the Settings Tab, and select "Set Steps Per Unit". It will ask you how far to move the machine. Before you do this, make a mark on the table exactly where the end mill is resting. You can do this by lowering the end mill until it touches the material, then spinning it by hand to cut a small dimple in the material. Then, raise the end mill to clear the material, and assign a distance to move the machine. Once the machine moves and stops, measure the exact distance that it actually traveled with a tape measure, and enter this value into the dialog box that asks how far it moved. Mach3 will automatically adjust your steps per unit for that axis to be more accurate. Do this for all axes often to ensure you are cutting accurately. The longer distances you use calibrate, and the more precise you are with your measurements, the better.

Click the link to add information to this solution:
HOW DO I CALIBRATE IN MACH3?

If you use the 2.2kW spindle, it can cut at 3/4 inch or 19 mm deep with at least a 1/4" cutting diameter single flute end mill. You will get better results with larger diameter end mills, but that is the worst case scenario. I still recommend doing a finishing pass on the edge to make sure everything is perfect.

Click the link to add information to this solution:
HOW DEEP CAN CUT IN ONE PASS?

Amazon and the Nile are the longest rivers in the world.

Click the link to add information to this solution:
THE LONGEST RIVER IN WORLD IS

Mount Everest

Click the link to add information to this solution:
THE HIGHEST MOUNTAIN IN WORLD

Howie D. was in the Backstreet Boys Band.

Click the link to add information to this solution:
WHAT POP GROUP WAS HOWIE D. IN?

Mount Everest is found in Nepal.

Click the link to add information to this solution:
IN WHICH COUNTRY MOUNT EVEREST?