[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".

Question #: 14650

Question: can't access Mach3 XML profile file. right click get "save link as" left click shows an error.

Current Solution

I am able to download the file with those instructions. What browser are you using?

You can also email me at customerservice@gmail.com and I will email the file.

Thanks!!

Additional Information:
I just made an instgram post on the instructions to get the file.
https://www.instagram.com/p/CGiibf9jzds/?utm_source=ig_web_copy_link

Additional Information:
Make sure the click the speaker icon to be enable sound on the Instagram post.

Respond:

Other Possible Solutions to this Question

  • I am getting that radus error in Mach3 and changing my IJ setting is not working. Any suggestions?

    What is the actual error that you are seeing in Mach3 and what CAM program are you using? Did you try installing a later version of Mach3 if your's is an earlier version? What post-processing setting are you using in your CAM program?

    Click the link to respond:
    I am getting that radus error in Mach3 and changing my IJ setting is not working. Any suggestions?

  • Helo. I'm using Meshcam to generate the toolpaths. What type of files should I "save as" for the greenbull CNC using Mach3 with the UC100 USB to Parallel?

    The file type to save for use with Mach3 is .tap or .nc. Make sure that you specify Mach3 as the post processor in Meshcam.

    Click the link to respond:
    Helo. I'm using Meshcam to generate the toolpaths. What type of files should I "save as" for the greenbull CNC using Mach3 with the UC100 USB to Parallel?

  • I can't get the Mach3 USB interface to work

    Please follow the steps on the following webpage:

    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

    Additional Information:
    Mach3 interface board not connected

    Additional Information:
    Mach3 interface board not connected

    Additional Information:
    Mach3 interface board not connected

    Additional Information:
    Mach3 interface board not connected

    Additional Information:
    Mach3 interface board not connected

    Additional Information:
    Mach3 interface board not connected

    Click the link to respond:
    I can't get the Mach3 USB interface to work

  • I get a probediag.dat error=5 when I start Mach3?

    Erase the file named probediag.txt and everything should work fine. Start Mach3 again and you should not get the error.

    If you still get the error, please submit additional information on this FAQ.

    Click the link to respond:
    I get a probediag.dat error=5 when I start Mach3?

  • I need technical support for your Bluechick CNC and I can't get a reponse on the phone.

    You may have called outside of our business hours. Give this "Customer Service Live" mechanism a try and ask away. If you would still rather call us, please call between 9:00am and 5:00 pm Central Time.

    Click the link to respond:
    I need technical support for your Bluechick CNC and I can't get a reponse on the phone.

  • I can't seem to find information on spindle control via the breakout board. Can someone point me in the right direction?

    We currently can only control the On/Off of the spindle via Mach 3 and through our Parallel Interface Board. We have the listed instructions on our Parallel Interface Board webpage, will be a easy job that will included 2 wires (18-24g wire will be fine) from your inverter(VFD) to the location of your Parallel Interface Board.

    Parallel Interface Board webpage: https://buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

    In regards to our USB Interface Board, we are currently working on a prototype board that will allow the same On/Off capability with Planet-CNC. Prototype Board currently not available as of yet.

    Click the link to respond:
    I can't seem to find information on spindle control via the breakout board. Can someone point me in the right direction?

  • I can't get any of the original build your cnc videos to load past step 5. Can anyone help please?

    Which machine has the issue with the videos?

    Click the link to respond:
    I can't get any of the original build your cnc videos to load past step 5. Can anyone help please?

  • What profile do I use in VCarve for a BlackToe?

    The blackToe is a CNC Router based on standard CNC Routing and milling actions. If you are referring to a profile machining operation (where the path follows the inside or outside edge of a polygon, line, arc or circle) then the profile is actually more a function what you want the CNC router (blackToe in this case) to do. A profile expects a specific end mill in the spindle and requires the specifications of the end mill in the profile operation.

    If you are referring to profile to mean "post processor" or specifications (profile of the control) for the g-code interpretation for a specific control program (like Mach3), then you will need to set the post processor in VCarve post-processor to the control program you are using.

    Please provide more specific information here so I can delve in a bit deeper.

    Click the link to respond:
    What profile do I use in VCarve for a BlackToe?

  • Where can I download the USBCNC software? The https://buildyourcnc.com/files/CNCUSB_20130308.zip link is dead.
  • USB connection can not move the gantry, it is connected but noticed in device manager is missing drivers. PCI serial port... any help would be great also there is two mach3 profiles one showers numbers moving as like the gantry should be but is not.
  • If I bring my 6090 with Huanyang VFD/spindle and G540 can you wire vfd/540 together and get it talking to mach3 for me?

    We can provide support to electronic components that we sell. We are unable to connect or diagnose electronics that we don't offer.

    Additional Information:
    We can provide solutions to products that we sell. For instance, we can inform how to connect a spindle's VFD to Mach3 using a RS-485 serial communication method.

    Click the link to respond:
    If I bring my 6090 with Huanyang VFD/spindle and G540 can you wire vfd/540 together and get it talking to mach3 for me?

  • My Mach3 will not start, it says probediag.dat error=5.

    Erase the file named probediag.txt and everything should work fine. Start Mach3 again and you should not get the error.

    If you still get the error, please submit additional information on this FAQ.

    Click the link to respond:
    My Mach3 will not start, it says probediag.dat error=5.

  • vfd error code 4 can we get a VFD error code listing?

    Remember, steps to correct and troubleshoot issues with any electrical devices should be done by a professional electrician.

    If you have an HY series VFD, the fault codes are below:

    OC-1: Over-current during ramp up or over-current at constant speed.
    Recommended actions: 1, 2, 3, 4

    OC-1: Over-current during ramp up or over-current at constant speed.
    Recommended actions: 1, 2, 5, 6

    OC-2: Over-current at deceleration or over-current at stop.
    Recommended actions: 1, 7, 2, 9, 10

    dL: Output short circuit.
    Recommended actions: 11, 1, 10

    Ou-1 or 2: Over-voltage at stop, over-voltage at acceleration, over-voltage at constant speed or over-voltage at deceleration
    Recommended actions: 12, 13

    Fb: Fuse break.
    Recommended actions: 14, 10

    Lu: Low voltage.
    Recommended actions: 15, 16, 17

    OH: Over heat of inverter.
    Recommended actions: 18, 19, 20

    OL-1: Inverter overload 150% per minute
    Recommended actions: 2, 21, 22

    OL-2: Motor overload 150% per minute.
    Recommended actions: 21, 23, 24, 25, 26, 21

    dT: Motor over-torque
    Recommended actions: 21, 23

    E.b.S.A or E.b.S.n or E.b.S.d or E.b.S.S: No feedback from the auxiliary coil or the lectromagnetic contactor
    Recommended action: 27

    bt: Braking transistor damage.
    Recommended action: 27

    CPu: CPU fault.
    Recommended action: 27

    E.E.E.S or E.E.E.n or E.E.E.d or E.E.E.A: EEPROM fault
    Recommended action: 27


    List of recommended actions:
    If error shows at ramp up or at constant speed:
    1. Check for a short circuit or partial short circuit and the insulation of the output wire is sufficient.
    2. Increase the capacity or the inverter if it is too small. Replace with an inverter that has a larger capacity
    3. Extend the ramp-up time
    4. Decrease the torque and increase the set value.
    5. Check if the motor is blocked and if there is a sudden change in load.
    6. Check if there is a sudden chance in the power supply voltage.
    7. Extend ramp down time
    9. DC breaking is too high. Decrease DC breaking
    10. Replace the inverter.
    11. Check to see if there is a short circuit with the connection wire of the motor.
    12. Extend the ramp-down time or add a breaking resistor.
    13. Check the mains supply voltage and insure there isn't ant sudden change in voltage.
    14. Send the inverter for repair.
    15. Check whether the input voltage is normal
    16. check whether there is a sudden change in load.
    17. Check whether there is any phase missing.
    18. Check the fan in the inverter. Is it spinning? Is it blocked? Does it have any foreign matter stuck on the fins of the fan? If so, clear the fan.
    19. Check the ambient temperature in the space that the inverter is placed.
    20. Check for adequate ventilation for the inverter where it is placed.
    21. Check for jamming or any sudden change with respect to mechanical load.
    22. Set the V/F curve correctly.
    23. The motor is too small.
    24. The motor is hot and the insulation of the motor degraded.
    25. Check if the voltage has a large variance.
    26. Check if there is a phase missing.
    27. Contact the supplier

    Additional Information:
    I have cnc wood carving machine 1325 the inverter showing error 0006

    Additional Information:
    What is uc3 error

    Additional Information:
    My inverter read error oc-1 high frequency how you can help me please


    Additional Information:
    My inverter read error oc-1 high frequency how you can help me please


    Additional Information:
    203

    Additional Information:
    E2 error

    Additional Information:
    Hello , I have an Redsail cnc and I get the following error " UC3 "after that the spindle stops arter a small knocking sound ,would there be an solution to this ?

    Additional Information:


    Additional Information:
    what does it mean when my spindle VFD shows E o and stops.


    Additional Information:
    Vfd er.01.5c

    Click the link to respond:
    vfd error code 4 can we get a VFD error code listing?

  • Mach 3 stalls in the middle of a file and the dwell button is flashes randomly. Can't control motors and have to re-start Mach 3. Any help?

    Is this a licensed version of Mach 3? If not and you are currently running the demo version, mach 3 will have only 500 lines of G-code available for cutting. Which will not allow you to cut or move the machine after the first 500 lines.

    Additional Information:
    Yes, It is a licensed version of Mach 3.

    Click the link to respond:
    Mach 3 stalls in the middle of a file and the dwell button is flashes randomly. Can't control motors and have to re-start Mach 3. Any help?

  • So the only way to get one of your machines is to buy it already cut, and/or assembled? I can't cut one on my existing machine?

    That is correct, the only manner to get our machines is to buy one of our kits. We do not provide or sell our plans, the only CNC machine you can find on our website will be the scratch build kit and plans which is a 20' x 40' , (https://buildyourcnc.com/Documents/CNC%20Kit%201-1.pdf).

    Click the link to respond:
    So the only way to get one of your machines is to buy it already cut, and/or assembled? I can't cut one on my existing machine?

  • CAN I GET DXF FILES FOR THE UPDATED PARTS OF MY MACHINE?

    Yes, the customer will need to sign our NDA (Non Disclosure Agreement) form and send it back to us. We will then send the dxf of the specific updated part of the machine.

    Click the link to respond:
    CAN I GET DXF FILES FOR THE UPDATED PARTS OF MY MACHINE?

  • Can we get a VFD Error Code listing?

    Remember, steps to correct and troubleshoot issues with any electrical devices should be done by a professional electrician.

    If you have an HY series VFD, the fault codes are below:

    OC-1: Over-current during ramp up or over-current at constant speed.
    Recommended actions: 1, 2, 3, 4

    OC-1: Over-current during ramp up or over-current at constant speed.
    Recommended actions: 1, 2, 5, 6

    OC-2: Over-current at deceleration or over-current at stop.
    Recommended actions: 1, 7, 2, 9, 10

    dL: Output short circuit.
    Recommended actions: 11, 1, 10

    Ou-1 or 2: Over-voltage at stop, over-voltage at acceleration, over-voltage at constant speed or over-voltage at deceleration
    Recommended actions: 12, 13

    Fb: Fuse break.
    Recommended actions: 14, 10

    Lu: Low voltage.
    Recommended actions: 15, 16, 17

    OH: Over heat of inverter.
    Recommended actions: 18, 19, 20

    OL-1: Inverter overload 150% per minute
    Recommended actions: 2, 21, 22

    OL-2: Motor overload 150% per minute.
    Recommended actions: 21, 23, 24, 25, 26, 21

    dT: Motor over-torque
    Recommended actions: 21, 23

    E.b.S.A or E.b.S.n or E.b.S.d or E.b.S.S: No feedback from the auxiliary coil or the lectromagnetic contactor
    Recommended action: 27

    bt: Braking transistor damage.
    Recommended action: 27

    CPu: CPU fault.
    Recommended action: 27

    E.E.E.S or E.E.E.n or E.E.E.d or E.E.E.A: EEPROM fault
    Recommended action: 27


    List of recommended actions:
    If error shows at ramp up or at constant speed:
    1. Check for a short circuit or partial short circuit and the insulation of the output wire is sufficient.
    2. Increase the capacity or the inverter if it is too small. Replace with an inverter that has a larger capacity
    3. Extend the ramp-up time
    4. Decrease the torque and increase the set value.
    5. Check if the motor is blocked and if there is a sudden change in load.
    6. Check if there is a sudden chance in the power supply voltage.
    7. Extend ramp down time
    9. DC breaking is too high. Decrease DC breaking
    10. Replace the inverter.
    11. Check to see if there is a short circuit with the connection wire of the motor.
    12. Extend the ramp-down time or add a breaking resistor.
    13. Check the mains supply voltage and insure there isn't ant sudden change in voltage.
    14. Send the inverter for repair.
    15. Check whether the input voltage is normal
    16. check whether there is a sudden change in load.
    17. Check whether there is any phase missing.
    18. Check the fan in the inverter. Is it spinning? Is it blocked? Does it have any foreign matter stuck on the fins of the fan? If so, clear the fan.
    19. Check the ambient temperature in the space that the inverter is placed.
    20. Check for adequate ventilation for the inverter where it is placed.
    21. Check for jamming or any sudden change with respect to mechanical load.
    22. Set the V/F curve correctly.
    23. The motor is too small.
    24. The motor is hot and the insulation of the motor degraded.
    25. Check if the voltage has a large variance.
    26. Check if there is a phase missing.
    27. Contact the supplier

    Additional Information:
    I have cnc wood carving machine 1325 the inverter showing error 0006

    Additional Information:
    What is uc3 error

    Additional Information:
    My inverter read error oc-1 high frequency how you can help me please


    Additional Information:
    My inverter read error oc-1 high frequency how you can help me please


    Additional Information:
    203

    Additional Information:
    E2 error

    Additional Information:
    Hello , I have an Redsail cnc and I get the following error " UC3 "after that the spindle stops arter a small knocking sound ,would there be an solution to this ?

    Additional Information:


    Additional Information:
    what does it mean when my spindle VFD shows E o and stops.


    Additional Information:
    Vfd er.01.5c

    Click the link to respond:
    Can we get a VFD Error Code listing?

  • can't get breakout board with relay working. in your video you show a 5v power supply input on the usb one but can't not find on this one?

    What part of your breakout board is not working? Are you having trouble getting a signal from the computer out of the breakout board to the drivers?

    The breakout board uses the USB as the 5v power source.

    Additional Information:
    Wiring the limit switches


    Additional Information:
    I am using my breakout board as port 2 from my ess smooth stepper only for limits so it's powered via 12v , now I want to use pin 17 to trigger my plasma will I still need to supply 5v power to is a well? As I'm not using the usb it's connected to smooth stepper via 25pin ribbin

    Click the link to respond:
    can't get breakout board with relay working. in your video you show a 5v power supply input on the usb one but can't not find on this one?

  • I purchased license for Mach3 yesterday. When do I receive download instructions and key?

    I will check

    Additional Information:
    The license was purchased and the developer is sending you the license shortly.

    Click the link to respond:
    I purchased license for Mach3 yesterday. When do I receive download instructions and key?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.