[ Log In ]
[ Register ]

Question #: 15419

Question: does the mach3 usb controller interface board support the M11/M10 command set

Current Solution

The Mach3 USB controller will work with M3/M4/M5 or M7/M8/M9 combinations. M10/M11 is not available with the controller.

Respond:

Other Possible Solutions to this Question

  • [575] does the mach3 usb interface board support the M11/M10 command set?

    The Mach3 USB controller will work with M3/M4/M5 or M7/M8/M9 combinations. M10/M11 is not available with the controller.

    Click the link to add information to this solution:
    [575] does the mach3 usb interface board support the M11/M10 command set?

  • Does USB Controller Breakout support Linux Ubuntu and does the software support command line interface (to control it with python scripts for example)

    The usb controller will only work with the planet-cnc software which is software that will work in Windows.

    Click the link to add information to this solution:
    Does USB Controller Breakout support Linux Ubuntu and does the software support command line interface (to control it with python scripts for example)

  • Does USB Controller Breakout support Linux Ubuntu and does the software support command line interface (to control it with python scripts for example)

    The usb controller will only work with the planet-cnc software which is software that will work in Windows.

    Click the link to add information to this solution:
    Does USB Controller Breakout support Linux Ubuntu and does the software support command line interface (to control it with python scripts for example)

  • Mach3 USB Interface Board, Backlash Compensation in Mach3 is not working. Does this board support the backlash function?

    In our experience, the backlash compensation is not an ideal mechanism to solve backlash issues. It is best to resolve the backlash issue mechanically regather than through software.

    Boards that handle all instructions on its own chip (which is the case for this all other USB boards) take some control away from Mach3. Without Mach3 having granular control. With that said, we do not have experience with the backlash compensation with that particular board. Our experience with backlash compensation with other boards have resulted in very poor accuracy and undesirable geometrical moves.

    Additional Information:
    zokkj

    Additional Information:
    zokkj

    Additional Information:
    zokkj

    Additional Information:

    Click the link to add information to this solution:
    Mach3 USB Interface Board, Backlash Compensation in Mach3 is not working. Does this board support the backlash function?

  • [575] Will the Mach3 USB interface board support other software such as Easel?

    The Mach3 USB controller is specifically engineered to integrate seamlessly with Mach3's CNC control software. Easel, on the other hand, offers an all-in-one CAD/CAM solution along with machine control capabilities. While Easel can output standard G-code compatible with industry-standard post-processors, it can serve as a design tool when used in conjunction with Mach3 but not as the machine control software.

    Click the link to add information to this solution:
    [575] Will the Mach3 USB interface board support other software such as Easel?

  • [575] Does the USB MACH3 controller support Sherline 1/2 pulse mode?

    The Mach3 100 kHz controller may be able to support the Sherline 1/2 pulse mode, but I have not tried it. There is no information in the documentation that is related to the parameter that can be set in Mach3 for the Sherline 1/2 pulse mode. You may be able to play with the available kHz ranges that the plugin allows to see if there is a pulse width that meets the Sherline 1/2 pulse mode specification.

    Click the link to add information to this solution:
    [575] Does the USB MACH3 controller support Sherline 1/2 pulse mode?

  • does the Mach3 USB Controller support Mach4

    No, the Mach3 USB controller only works with Mach3. If you wish to use Mach4, I would recommend this very feature-rich controller:
    Pokeys57CNC controller https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

    Click the link to add information to this solution:
    does the Mach3 USB Controller support Mach4

  • I am interested in using the Mach3 USB interface board. I was wondering if there was a way to run a torch height controller with this board for use with a plasma cutter, and if so do you know of any THCs that will work. Thank you.

    Yes, you can connect a THC, Torch Height Controller, with the Mach3 USB controller. The THC uses the inputs to determine if the z axis needs to move up or down according to the arc of the plasma torch. The THC connects its outputs to the inputs of the controller so the controller will be informed of the states of the plasma torch.

    Click the link to add information to this solution:
    I am interested in using the Mach3 USB interface board. I was wondering if there was a way to run a torch height controller with this board for use with a plasma cutter, and if so do you know of any THCs that will work. Thank you.

  • Does the USB controller come with driver installation instructions so we could create our own user interface to communicate with the motor?

    You can use a Pickit 2 programming to load firmware onto the usb driver. The USB use a Microchip pic microcontroller. If you can manage writing a program for the Pic microcontroller and have a Pickit 2 firmware uploader (programmer), you should have no problem.

    Click the link to add information to this solution:
    Does the USB controller come with driver installation instructions so we could create our own user interface to communicate with the motor?

  • Mach3 USB interface board initial setup. Following instructions in the video "Mach3 USB controller outputs". Arrow keys cause red LED to blink, but cannot duplicate 24V output with M3 (or M4) commands as shown in the video. Do I need to re-install Mach3?

    If the outputs are not functioning as expected on the Mach3 USB controller, confirm that the port for the output is 3. This is a part of the configuration I did not show on the video I created on using the outputs for the RNRMotion controller.

    Additional Information:
    Thanks for your help. Under Ports & Pins>Output Signals I show Output#1 through Output#4 as Enabled. All have Port# set to 3. Pin Numbers for each Output# are same as Output# (Output#1 set to Pin Number 1, etc.).
    Still no voltage showing on output 1 (of the board) when I input M3 in the Input section of the MDI tab. However if (in Spindle Setup tab) I set (in "Relay Control")M3 Output# to 3 and M4 Output# to 4 things work as expected. Is it possible to have the M3 signal show up on Output#1?
    Thanks again.

    Additional Information:

    Click the link to add information to this solution:
    Mach3 USB interface board initial setup. Following instructions in the video "Mach3 USB controller outputs". Arrow keys cause red LED to blink, but cannot duplicate 24V output with M3 (or M4) commands as shown in the video. Do I need to re-install Mach3?

  • [575] Hello. Does this USB interface board thc? I have the proma 150.

    I do not recommend using the Mach3 USB controller to be used with a torch height controller. There are only 4 inputs on the Mach3 USB controller. We have tried to interface a Proma THC to this board without success; however, we did not exhaust all possibilities.

    I would recommend the Pokeys57CNC controller to connect the Proma THC as I have interfaced these two before and they work well together.
    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

    Click the link to add information to this solution:
    [575] Hello. Does this USB interface board thc? I have the proma 150.

  • Will Mach3 USB Interface board fit in my redleaf, in lieu of the breakout board that came with it?

    The Mach3 USB board will fit in the redLeaf, but you may need to modify the Plexiglas top for proper mounting. However, the redLeaf has the proper parallel GPIO on the motherboard for use with the Parallel breakout board. If you have a laser on the machine you are using, then I would urge you to maintain the parallel breakout board as the Mach3 USB board will not work correctly using the Z-direction pin and you will need to determine how to use the output pins onthe USB board to ensure proper laser functionality.

    Click the link to add information to this solution:
    Will Mach3 USB Interface board fit in my redleaf, in lieu of the breakout board that came with it?

  • Mach3 USB interface board. Could you please give me the correct wiring configuration for tool prob?

    Depending on the probe that you have, you should have two wires coming from the probe. One of those two wires will need to be connect to an input pin as shown in this wiring diagram (the diagram show the probe connected to pin I4):
    https://www.buildyourcnc.com/Documents/Electric%20Wiring%20Diagram.pdf

    The other pin is connected to V-. Please make sure that you have 24V connected to the V- and V+ on that side of the Mach3 USB board.

    The way the probe works is when the probe is in contact with an object, a specific spring mechanism will cause the input pin to be connected to the V- (close the circuit). When Mach3 senses an active low on the input pin, mach3 knows that the probe has made contact (closed the circuit).

    If your probe is used as a Z-Axis zero plate, then the concept is the same, but the end mill is connected to V- and the plate is connected to the input pin. If the plate comes in contact to the end mill, then the circuit is closed and mach3 will sense an active low on the input pin.

    Click the link to add information to this solution:
    Mach3 USB interface board. Could you please give me the correct wiring configuration for tool prob?

  • Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

    Yes, Mach3 (the software profram) will work with Windows 7, and windows 10 when coupled with the Mach3 USB interface. If you intend to use the parallel port driver, stick with Windows 7 in 32-bit mode.

    Additional Information:
    Rnrmotion.dll is a dynamic link library which is very similar in function to an executable program, or app. Since a dll is executable, malicious code can be embedded in that type of file, so windows will automatically flag all files of this type. You just need to make sure you are downloading from a trusted source. The emotion.dll file on our site is clean, but still run run windows defender against it to make sure.

    Click the link to add information to this solution:
    Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

  • Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

    Rnrmotion.dll is a dynamic link library that is very similar in function to an executable program, or app. Since a dll is executable, malicious code can be embedded in that type of file, so windows will automatically flag all files of this type. You just need to make sure you are downloading from a trusted source. The emotion.dll file on our site is clean, but still, run windows defender against it to make sure.

    Click the link to add information to this solution:
    Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

  • Can I use your USB interface board and Mach3 on my 3 axis CNC router?

    Planet-CNC is the control software. If you decide to use the USB controller, you will need to use the planet-CNC software as the control software. You will be able to use any of the CAM software applications with the planet-CNC control software.

    Click the link to add information to this solution:
    Can I use your USB interface board and Mach3 on my 3 axis CNC router?

  • I AM INTERESTED IN THE 3 AXIS COMBO USB OPTION. NOTICE YOU ENDORSE PLANET-CNC FOR USE WITH THIS BUT WILL MACH3 INTERFACE WELL BEAK OUT BOARD?
  • How can I connect an inductive proximity sensor to the Mach3 USB controller?

    I would suggest using the NPN proximity sensor for the Mach3 USB or the Pokeys57cnc. The proximity sensors have a top DC voltage limit of 30 volts, so it would be best to use the 24V power supply that is used to power the controller. Both controllers have a 24V power requirement, so that is convenient.

    The blue wire of the proximity sensor is the GND wire and is connected to the 24V power supply's V- terminal. The brown wire is the positive wire and is connected to the V+ terminal of the 24V power supply. The black wire is the signal wire and is connected to the input terminal of the controller.

    Click the link to add information to this solution:
    How can I connect an inductive proximity sensor to the Mach3 USB controller?

  • where can I find wiring instructions for the Mach3 USB controller?

    You can find all of the wiring instructions for the Mach3 USB controller here:
    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

    Scroll down until you see the videos. The wiring instructions cover wiring all of the axes, setting up the inputs to sense limit switches, setting up the outputs and how to diagnose the outputs, setting up an external relay to control external devices, and setting up spindle speed.

    Click the link to add information to this solution:
    where can I find wiring instructions for the Mach3 USB controller?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.