[ Log In ]
[ Register ]

Question #: 15530

Question: [Coupling Spider (goes between two coupling hubs)] is this L050?

Current Solution

Yes, this coupling buna spider is compatible with the L050

Respond:

Other Possible Solutions to this Question

  • DOES THIS SUPPORT THC FUNCTIONS.

    Yes, this board supports THC functions. I have tested the Proma THC and the PlasmaSens which use fiber optics for communication to reduce EMI.

    Click the link to add information to this solution:
    DOES THIS SUPPORT THC FUNCTIONS.

  • IF YOU HAVE CIRCUIT (OR PICTURE) OF HOW THIS RELAY IS CONNECTED TO THE ROUTER
  • WHAT IS "BACKLASH"

    Backlash is a term used to describe the looseness in a mechanical system. Backlash can occur anywhere in a machine, but is generally emphasized at the nut and lead screw connection. If the nut threading doesn't perfectly match the lead screw thread, there will be a wiggle, or play between both the screw and nut. This is backlash. Backlash can also be located in the motor bearings, coupling (connecting a shaft or lead screw to the motor shaft), collars not being hard against the bearing, or temperature change that causes various materials to expand or contract, making the connections loosened.

    Click the link to add information to this solution:
    WHAT IS "BACKLASH"

  • WHO IS YOUR FATHER

    It is the same machine. However, the one on our site comes with a instructional DVD.

    Click the link to add information to this solution:
    WHO IS YOUR FATHER

  • IS THE FLU SERIOUS?

    Influenza is the most frequent cause of death from a vaccine-preventable disease in the United States. From 1990 through 1999, an average of approximately 36,000 influenza-associated pulmonary and circulatory deaths occurred during each influenza season. In addition to fatalities, seasonal influenza is also responsible for more than 200,000 hospitalizations per year. Rates of infection from seasonal influenza are highest among children, but the risks for complications, hospitalizations, and deaths are higher among adults ages 65 and older, children younger than 5 years, and people of any age who have medical conditions that place them at increased risk for complications from influenza.

    A novel H1N1 virus was first detected in March of 2009 and quickly spread to pandemic levels. In the U.S., it is estimated that approximately 43-89 million persons became ill with 2009 pandemic H1N1 from April 2009 to April 2010. The virus also resulted in significant hospitalizations and deaths among children, adults 19-65 years, obese persons, and pregnant and post-partum women.

    Click the link to add information to this solution:
    IS THE FLU SERIOUS?

  • WHAT SIZE WRENCHES DOES THIS SPINDLE TAKE TO TIGHTEN?

    To loosen and tighten the collet nut for the 2.2kW spindle, I use a 22mm wrench (spanner) for the shaft and a 30mm wrench for the nut.

    Click the link to add information to this solution:
    WHAT SIZE WRENCHES DOES THIS SPINDLE TAKE TO TIGHTEN?

  • WHO IS THE BRAIN

    The ALL POWERFULL!!!

    Click the link to add information to this solution:
    WHO IS THE BRAIN

  • WHAT IS FOCAL LENGTH

    The lens is 20mm wide and a 50.6mm focal length (the one included). This lens will stand up to at least 30PSI air assist.

    The mirrors are 25mm wide mirrors.

    Focal length is the distance from the lens to the material for the laser converge into the best focal point. If a lens is listed as 2". You measure 2" from the lens to the material, this will be the tightest point the laser can go before it starts to re-expand again losing focus.

    Click the link to add information to this solution:
    WHAT IS FOCAL LENGTH

  • WHY IS THE SKY BLUE?

    Sunlight reaches Earth's atmosphere and is scattered in all directions by all the gases and particles in the air. Blue light is scattered in all directions by the tiny molecules of air in Earth's atmosphere. Blue is scattered more than other colors because it travels as shorter, smaller waves. This is why we see a blue sky most of the time.

    Click the link to add information to this solution:
    WHY IS THE SKY BLUE?

  • WHAT IS CNC MACHINE?

    A CNC machine is basically a computer controlled high precision tool that is able to make intricate movements accurately and repeatedly. Our machines use common routers and spindles to mill, cut, engrave and shape materials in automated machining operations.

    Click the link to add information to this solution:
    WHAT IS CNC MACHINE?

  • WHAT IS KERF?

    Kerf is the cutting width from the lasers beam. This will change in width depending on your power level, higher power will increase your kerf width. This is usually around 0.15mm for a 40w laser using a 2" lens

    Click the link to add information to this solution:
    WHAT IS KERF?

  • WHAT IS PI?

    Approximately 3.1415927

    Click the link to add information to this solution:
    WHAT IS PI?

  • THE LONGEST RIVER IN WORLD IS

    Amazon and the Nile are the longest rivers in the world.

    Click the link to add information to this solution:
    THE LONGEST RIVER IN WORLD IS

  • THE LONGEST HIGHWAY IN WORLD IS

    Trans-Canada

    Click the link to add information to this solution:
    THE LONGEST HIGHWAY IN WORLD IS

  • THE HIGHEST MOUNTAIN IN WORLD IS

    Mount Everest

    Click the link to add information to this solution:
    THE HIGHEST MOUNTAIN IN WORLD IS

  • WHAT PART OF A CELL IS DNA FOUND?

    Nucleus is the organelle of a living cell DNA is found.

    Additional Information:


    Additional Information:
    nucleus


    Additional Information:
    qwertyuio

    Click the link to add information to this solution:
    WHAT PART OF A CELL IS DNA FOUND?

  • WHAT IS THE LEAD TIME FOR REDFROG?

    You can expect a two week lead time for the redFrog pick and place machine.

    Additional Information:

    Click the link to add information to this solution:
    WHAT IS THE LEAD TIME FOR REDFROG?

  • WHAT IS THE LEAD TIME FOR BLACKTOE?

    You can expect a one week lead time for our machines.

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    WHAT IS THE LEAD TIME FOR BLACKTOE?

  • WHAT IS THE LEAD TIME FOR BLACKFOOT

    You can expect a one week lead time for our machines.

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    WHAT IS THE LEAD TIME FOR BLACKFOOT

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.