what options can you offered to international customers to assist in them building one of your machines? International shipping of a kit would be too expensive.

New 3D Resins Comparison Table:
We've just launched a new, comprehensive 3D Resins Comparison Table to help you find the perfect resin for any application. Explore now and elevate your 3D printing experience with ease and precision. Say goodbye to searching all over the web for scattered information.

Livestreams Every Weekday at 1:00 pm Eastern
Join me and likeminded others on a livestream I host every weekday where I experiment, learn and discover. Topic for Tuesdays and Thursdays: CNC Discussion and Random Experiments. Topic for Mondays, Wednesdays and Fridays: Microcontroller programming and circuit building.

Question #: 2325

Question: what options can you offered to international customers to assist in them building one of your machines? International shipping of a kit would be too expensive.

Current Solution

We are able to ship internationally but unfortunately we cannot control the shipping costs incurred for international customers. However, if you are associated with educational programs or Makerspaces and/or Fab Labs we do offer certain discounts in some cases. Please send an email to customer service for more information on receiving a quote.

Respond:

Other Possible Solutions to this Question

Regards I hope to know the time it takes for shipping by USPS Priority mail international to Jeddah in Saudi Arabia Thank you
The usual travel time overseas, takes around 1 week to 3 weeks depending on the carrier and service selected.
Click the link to add information to this solution:
Regards I hope to know the time it takes for shipping by USPS Priority mail international to Jeddah in Saudi Arabia Thank you
Regards I hope to know the time it takes for shipping by USPS Priority mail international to Jeddah in Saudi Arabia Thank you
The usual travel time overseas, takes around 1 week to 3 weeks depending on the carrier and service selected.
Click the link to add information to this solution:
Regards I hope to know the time it takes for shipping by USPS Priority mail international to Jeddah in Saudi Arabia Thank you
BUILDING ONE OF YOUR GREENBULL 6X LONG AND 2.2 KILOWATT SPINDLE DOES NOT FIT. SEEMS LEAD SCREW YOU SENT WITH KIT IS SHORT 42" LOOKS LIKE IT NEEDS TO BE 5 OR 6 INCH LONGER. THIS CORRECT? WHAT THE NEEDED LENGTH FOR UNIT?
The leadscrew length for the greenBull long Z-axis is 47 inches.

Additional Information:
Click the link to add information to this solution:
BUILDING ONE OF YOUR GREENBULL 6X LONG AND 2.2 KILOWATT SPINDLE DOES NOT FIT. SEEMS LEAD SCREW YOU SENT WITH KIT IS SHORT 42" LOOKS LIKE IT NEEDS TO BE 5 OR 6 INCH LONGER. THIS CORRECT? WHAT THE NEEDED LENGTH FOR UNIT?
I am building your "Green Bull' 6 foot wide kit and I am at the stage of attaching the motor and drive chain. I would like to know if you have an modification kit available to put the 1/2" ACME screw on the Y-axis?
Currently we do not have that modification kit, our set up is fixed for our greenBull only modification kit we have for this model is the long z-axis kit(Designed for Foam cutting).
Click the link to add information to this solution:
I am building your "Green Bull' 6 foot wide kit and I am at the stage of attaching the motor and drive chain. I would like to know if you have an modification kit available to put the 1/2" ACME screw on the Y-axis?
I HAVE YOUR MACH3 USB BOB, DO YOU GUYS SELL A TORCH CONTROL RELAY CAN WIRE UP TO TURN MY PLASMA ON AND OFF HOW WOULD WIFE THAT TOO THIS BOB?
We do have a relay board that words like a standard relay.

Here is the URL of the relay board that we offer:

https://www.buildyourcnc.com/item/electronicsAndMotors-breakout-Relays-relay-board-250V-12A-5V
Click the link to add information to this solution:
I HAVE YOUR MACH3 USB BOB, DO YOU GUYS SELL A TORCH CONTROL RELAY CAN WIRE UP TO TURN MY PLASMA ON AND OFF HOW WOULD WIFE THAT TOO THIS BOB?
Will it be possible to only buy the CNC plans, I live in South Africa and shipping is very expensive...
The files and hardware option for our machines has been removed from the site due to the following reasons:
Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
The abuse of these files over the internet.
Ultimately may reduce the sales of machines keeping us in business.
Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

Additional Information:
NO, is not possible, I can help with the shipping cost

Additional Information:
Click the link to add information to this solution:
Will it be possible to only buy the CNC plans, I live in South Africa and shipping is very expensive...
Purchasing and shipping a kit internationally would make the price prohibitive. Are the dxf files available on their own so that the parts can be machined locally?
The files and hardware option for our machines has been removed from the site due to the following reasons:
Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
The abuse of these files over the internet.
Ultimately may reduce the sales of machines keeping us in business.
Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

Additional Information:
NO, is not possible, I can help with the shipping cost

Additional Information:
Click the link to add information to this solution:
Purchasing and shipping a kit internationally would make the price prohibitive. Are the dxf files available on their own so that the parts can be machined locally?
Regarding L6203/L297 Stepper Board Driver, would you be willing to sell two unpopulated boards? A friend and I are each building a low cost CNC and I already have most of the components. Thanks.
We don't hold those boards in-house anymore. You can use the schematic to form your own boards if you wish.

Additional Information:
Thanks for the reply. Has this proven to be a good design?

Additional Information:
Click the link to add information to this solution:
Regarding L6203/L297 Stepper Board Driver, would you be willing to sell two unpopulated boards? A friend and I are each building a low cost CNC and I already have most of the components. Thanks.
CAN YOU PLEASE TELL ME THE AVAILABILITY OF 12X36 BLUE CHICK 4.2, AND COST FOR SHIPPING TO ZIP 72802 IN RUSSELLVILLE, ARKANSAS?
Yes, the blueChick kits are available. You can get the shipping rates automatically in the shopping cart. There will be a calculate shipping button on the enter shipping information section of the shopping cart.
Click the link to add information to this solution:
CAN YOU PLEASE TELL ME THE AVAILABILITY OF 12X36 BLUE CHICK 4.2, AND COST FOR SHIPPING TO ZIP 72802 IN RUSSELLVILLE, ARKANSAS?
All of the pics and videos show your cncs cutting sheet materials, I'm interested in carving 3d images in plastic and hardwood slabs up to 2" thick. What machine and software would you recommend?
All of our CNC machines can carve at that depth without a problem and do 3d carving. Our typical application is cutting sheet materials, but a good percentage of our customers cut 3D bas reliefs or even more complex 3D objects using reference points and jigs.

Most of our CNC machines have a Z travel of at least 6 inches for the smaller machines and 7 to 10 inches for our larger machines. The Fabricator Pro has a Z travel of 10 inches.

Depending on your application, you will need to consider the length of the end mill (more than the deepest depth of the 3D carving) and the stock that you will be using. If the stock plus the length of the end mill exceed the clearance with the Z axis raised to the top extent, then you will need to consider the way the table/bed of the machine is formed (maybe with a depression to take advantage of the greater need for clearance).

The greenBull has the capability of Z axis travel of up to 36 inches, but I would recommend, if milling wood, that the Z-axis not extend more than 12 inches to reduce deflection.

Additional Information:
Most of the CAM software on the market will have 3D profile machining operation capabilities. CAMBAM has a very nice 3D prpfiling feature. The Vectric line of software can definitely handle this as well.
Click the link to add information to this solution:
All of the pics and videos show your cncs cutting sheet materials, I'm interested in carving 3d images in plastic and hardwood slabs up to 2" thick. What machine and software would you recommend?
I would like to design my own CNC router around one of your electronics bundles, either the 3 Axis - Heavy Gantry or 3 Axis - All Large Motors. Do you have the data sheets for the motors so that I can use the dimensions in my model?
You can find the datasheets to our motors be going to the the stepping motor category page https://www.buildyourcnc.com/category/nema and selecting the motor. This will bring you to the product page for the motor and all of the motor information will be found there.
Click the link to add information to this solution:
I would like to design my own CNC router around one of your electronics bundles, either the 3 Axis - Heavy Gantry or 3 Axis - All Large Motors. Do you have the data sheets for the motors so that I can use the dimensions in my model?
Building the 2'x4' CNC from the Woodsmith plans and want to use a router with 1/2" collet. Will your stepper motor kit with 2 NEMA-23 and 1 NEMA-34 be sufficient for a Bosch 1617 router motor, or will it be too heavy?
You will be fine with using 2 NEMA 23/24 (425 oz-in) and 1 NEMA 34 (651 oz-in) motors with the Woodsmith CNC build with a large heavy router with a 1/2" collet. Specifically, the Woodsmith CNC build uses lead screws for each axis and this will provide mechanical advantage allowing the motors along with the drive mechanics (lead screws) an increase in torque.
Click the link to add information to this solution:
Building the 2'x4' CNC from the Woodsmith plans and want to use a router with 1/2" collet. Will your stepper motor kit with 2 NEMA-23 and 1 NEMA-34 be sufficient for a Bosch 1617 router motor, or will it be too heavy?
are you out of your freaking minds with these shipping rates. About to go through with order but you lost me! Good luck!
Thank you for your feedback. Generally we are considered to be quite sane as a collective, although this can change from time to time.

We have a disclaimer on shipping rates, especially if you are ordering from outside of the United States, rates are generally shown only for air-shipments from USPS, UPS, and FedEX, which can be quite expensive. We do work with several freight and shipping companies that allow us to calculate options for lowering shipping costs. These companies do not generally have APIs that we can integrate into the website, so we need time to process quotes.

If the shipping quote you received from the website seems unreasonable, there is a good chance we can quote you a better rate. All you need to do is inquire with sales@buildyourcnc.com and we will make sure we get you the best possible rate.
Click the link to add information to this solution:
are you out of your freaking minds with these shipping rates. About to go through with order but you lost me! Good luck!
IF I PURCHASE A GREENBULL 6X LONG Z CNC MACHINE KIT AND MACH3, WHAT ELSE WOULD BE REQUIRED TO ASSEMBLE THE WORKING MACHINE? HAVE CAD SOFTWARE.
You will need to build the table unit for your machine. There are instructions on how to do this at the bottom of the product page here, https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4
There is no estimate on how much this will cost though, since there are too many variables involved to do this.

- PC with parallel port and USB port
- 20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
- 18awg stranded wires for power supply to drivers
- 24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx

This answer is applicable to most of our machines with the exception of the greenLean and the blueChick since those machines are equipped with a table structure.

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
IF I PURCHASE A GREENBULL 6X LONG Z CNC MACHINE KIT AND MACH3, WHAT ELSE WOULD BE REQUIRED TO ASSEMBLE THE WORKING MACHINE? HAVE CAD SOFTWARE.
If I purchase a greenBull 6X Long Z CNC Machine Kit and Mach3, what else would be required to assemble the working machine? I have CAD software.
You will need to build the table unit for your machine. There are instructions on how to do this at the bottom of the product page here, https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4
There is no estimate on how much this will cost though, since there are too many variables involved to do this.

- PC with parallel port and USB port
- 20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
- 18awg stranded wires for power supply to drivers
- 24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx

This answer is applicable to most of our machines with the exception of the greenLean and the blueChick since those machines are equipped with a table structure.

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
If I purchase a greenBull 6X Long Z CNC Machine Kit and Mach3, what else would be required to assemble the working machine? I have CAD software.
CAN YOUR PRODUCTS OF MACHINES BE USED TO CREATE PLASMA TABLE?
The plasma nozzle must be close to the cutting area and you will need some way to keep the nozzle at the right level with some type of device. The spray is downward, so you will need a contained area with a sheet of water at the bottom to extinguish he spray. You should have no problem using our machines for this application since you would need to product the table bed.
Click the link to add information to this solution:
CAN YOUR PRODUCTS OF MACHINES BE USED TO CREATE PLASMA TABLE?
[788] Thanks for the oportunity to ask, I am building a cnc and using npn closed sensors could you help me with the conection of these, do i still connect them in series if i use more than two in each axis. Also you mention that a stop switch should be connected grd and input to the controller would that be done after the 24v power supply. Thanks r
If the sensors are NC (normally closed) you can wire them in series. If the sensors are NO (Normally Open) you can still wire them to the same input, but the wiring needs to be in parallel (like a ladder). I have more information on the following video:
Click the link to add information to this solution:
[788] Thanks for the oportunity to ask, I am building a cnc and using npn closed sensors could you help me with the conection of these, do i still connect them in series if i use more than two in each axis. Also you mention that a stop switch should be connected grd and input to the controller would that be done after the 24v power supply. Thanks r
THERE´S A CELLULAR PHONE ANTENNA ON THE ROOF OF BUILDING RIGHT OPPOSITE MY WINDOW, LEVEL ABOUT TEN METERS ABOVE HEAD. AM I LIKELY TO BE IN RADIUS RADIATION?
You will have to contact the cell phone company that operates that particular antenna to obtain the radiation pattern (or emission pattern) of that particular type of antenna. Different models of antennae have different emission patterns to provide coverage of different size and shape geographical areas. For example, many of the antennae are directional, only broadcasting in the forward direction. Most emit very little radiation in the upward and downward directions, although the vertical extent of the beam can be quite different for different antennas. Some are strongly focussed on the horizon, others provide better coverage of nearby areas. Many antennae only broadcasting into a defined geometrical sector of the horizion, often 120 degrees so that three sets of antennae are required to cover the entire horizon. Therefore, to find the type of radiation pattern broadcast by any particular antenna will require local information from the equipment operator. Gary Zeman, ScD
Click the link to add information to this solution:
THERE´S A CELLULAR PHONE ANTENNA ON THE ROOF OF BUILDING RIGHT OPPOSITE MY WINDOW, LEVEL ABOUT TEN METERS ABOVE HEAD. AM I LIKELY TO BE IN RADIUS RADIATION?
I build custom speakers and I work primarily with 5'x5' sheets of 9 ply (1/2") and 13 ply (3/4") plywood, but I occassionally cut 2" nominal thick wood as well. What kit would you recommend? Are your systems accurate enough to do angle cuts (45 deg?) thanks
The best machine due to the width, will be the greenBull 5x which would have a cutting surface of 5' x 10'. Also our machines with spindle are accurate for 1000's of an inch, and can do 45 degree angle cuts.
Click the link to add information to this solution:
I build custom speakers and I work primarily with 5'x5' sheets of 9 ply (1/2") and 13 ply (3/4") plywood, but I occassionally cut 2" nominal thick wood as well. What kit would you recommend? Are your systems accurate enough to do angle cuts (45 deg?) thanks