Machine sizes outside of what is selectable on the home page, or the machine product page require a special quote. You can text me at 832-477-0526 for a quote on a unique configuration.

Click the link to add information to this solution:
[593] I want this to be 12' long. how much does that cost?

We can supply 1/2" lead screw with a maximum continuous length of 77 inches.

Additional Information:
Please give me a cost on a 6'x 1/2" lead screw. Thank you

Additional Information:
no


Additional Information:
what is the total cost for 77 inches of 1/2 inch lead screw?


Additional Information:
what is the cost of 6 feet lead screw.

Click the link to add information to this solution:
What is the longest 1/2" Acme lead screw that I can buy?

The Mach3 USB Interface Board is designed to handle an output current of 50mA. These outputs are generally not suitable for heavy loads like Spindle Governor Relays (SGRs)​​. Given that your SGR pulls 2.6 Amps, it exceeds the capacity of the Mach3 USB Interface Board's output. Therefore, directly switching the SGR using the Mach3 USB Interface Board is not advisable. Instead, using your existing C36 rev1.1 board as an intermediary would be the recommended approach. This board can handle higher currents and will act as a buffer, protecting the Mach3 USB Interface Board from being overwhelmed by the higher current demand of your SGR.

Click the link to add information to this solution:
[575] How many Amps can the output handle? My SGR pulls 2.6 Amps so I need to know if the output can handle that much.

You can measure the tramming angle by putting a long L shaped rod that will fit into the spindle's collet and affix a piece that will tough the table to the other end of the rod. Rotate the rod to determine how far out you are. The longer the rod, the more accurate the measurement will be.

Click the link to add information to this solution:
I want to fix the tramming issue, how can I measure this

Mach3 license purchases are processed during our working hours of 9 AM - 5 PM Central Standard Time, Monday through Friday. If you order after hours, licensed will generally be sent to your email address the following morning.

Click the link to add information to this solution:
I ordered a Mach3 license to be delivered by email, how long does that take to receive ?

What 3d printer do you have?

Additional Information:
whiteant

Click the link to add information to this solution:
HAVE 3D PRINTER THAT WANT TO MAKE CNC ROUTER ,IS THERE ANY GUIDES SHOW ME THE WAY

You can determine if the country is serviceable by:
- selecting the items you want to purchase on the website
- go to the cart (shopping cart top left of any webpage)
- log in, or register
- Enter the address and click on calculate shipping.

The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

The shipping times are determined by the service you select in the shopping cart. If a machine is purchased, we generally have a one week lead time unless otherwise stated in the description of the machine's product page.

Additional Information:

Click the link to add information to this solution:
I want to buy your product, could you shipping to other country (I'm in Indonesia)?

Our machines can mill aluminum, we have only tested with thin aluminum sheets. But milling aluminum is no problem with our machines, here is a video we recently did with our gB 4'x8' the aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting

Click the link to add information to this solution:
Hello I just want to ask, is this machines can milling Aluminum?

Mounting the extruder to the whiteAnt can be done a couple of ways. One is to take the 4 mounting holes located at the lower portion of the z-axis rail support and use long screws protruding out. Take a thinner material and drill the four holes matching the locations of the 4 screws and screw on nuts to hold it in place. The other option would be to use the metal bracket and fasten to the edge of the rail support.

Click the link to add information to this solution:
How do I attach the 3d extruder that came with whiteant, the intructional video is for a diferent type.

Prices on amazon are fixed costs for shipping. The website generally reports high costs for international shipments but we can give you a better quote if you care to email sales@buildyourcnc.com

Click the link to add information to this solution:
I want to order 8 Hiwin Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US.

If your motors are hot to the touch, this is normal. Current is being drawn by the motor coils as the motor moves and as the motor stays at a position. If the motor is not using the current in the coils to move (holding it's position), the energy will be translated as heat (rather than motion, sound or light). Even while moving, some of the energy will be lost as heat. Remember that energy cannot be created nor destroyed.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
My Nema 34 Step motors get fairly hot to the touch. Is that normal?

Prices on amazon are fixed costs for shipping. The website generally reports high costs for international shipments but we can give you a better quote if you care to email sales@buildyourcnc.com

Click the link to add information to this solution:
I want to order 8 HIWIN Linear Guide Blocks. Is there a cheaper shipping option? $70 is too much for something that weighs less than 5 lbs. I live in the continental US

blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in


Scratch-Build / Book-Build Kit:

X-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 1600 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Additional Information:


Additional Information:
Scratch built/book CNC with NEMA 34 motors and CW8060 microstep driver

Additional Information:


Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
L8NiICEm

Additional Information:
-1 OR 2+427-427-1=0+0+0+1 --

Additional Information:
-1 OR 2+145-145-1=0+0+0+1

Additional Information:
-1' OR 2+101-101-1=0+0+0+1 --

Additional Information:
-1' OR 2+739-739-1=0+0+0+1 or 'kXOzulhF'='

Additional Information:
-1" OR 2+194-194-1=0+0+0+1 --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:



Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:



Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
TO93cbNY

Additional Information:
-1 OR 2+824-824-1=0+0+0+1 --

Additional Information:
-1 OR 2+681-681-1=0+0+0+1

Additional Information:
-1' OR 2+805-805-1=0+0+0+1 --

Additional Information:
-1' OR 2+93-93-1=0+0+0+1 or 'MpFdFb3O'='

Additional Information:
-1" OR 2+275-275-1=0+0+0+1 --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
-1); waitfor delay '0:0:7' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(9),0))XOR"Z

Additional Information:
2k2XS4cL'; waitfor delay '0:0:15' --

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:
g7NWXuig'); waitfor delay '0:0:15' --

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
XoN629J2')); waitfor delay '0:0:15' --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
-5 OR 247=(SELECT 247 FROM PG_SLEEP(15))--

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
-5) OR 122=(SELECT 122 FROM PG_SLEEP(15))--

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
-1)) OR 455=(SELECT 455 FROM PG_SLEEP(15))--

Additional Information:
o1WPxXu4'; waitfor delay '0:0:15' --

Additional Information:
X3pq07N4' OR 218=(SELECT 218 FROM PG_SLEEP(15))--

Additional Information:
i2jhQp7d'); waitfor delay '0:0:15' --

Additional Information:
xMv7x4te') OR 71=(SELECT 71 FROM PG_SLEEP(15))--

Additional Information:
IbKvmZZx')); waitfor delay '0:0:15' --

Additional Information:
YkhmkP9W')) OR 826=(SELECT 826 FROM PG_SLEEP(15))--

Additional Information:
-5 OR 539=(SELECT 539 FROM PG_SLEEP(15))--

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:
-5) OR 160=(SELECT 160 FROM PG_SLEEP(15))--

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@EQr47

Additional Information:
-1)) OR 220=(SELECT 220 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
-1)) OR 266=(SELECT 266 FROM PG_SLEEP(9))--

Additional Information:



Additional Information:
-1)) OR 107=(SELECT 107 FROM PG_SLEEP(0))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
vL4vUHTG' OR 262=(SELECT 262 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
gGLXRSqE' OR 938=(SELECT 938 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
WT10Ii3x' OR 598=(SELECT 598 FROM PG_SLEEP(9))--

Additional Information:



Additional Information:
QUuBKFso') OR 152=(SELECT 152 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
nI56G5Pp')) OR 493=(SELECT 493 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:



Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@nxzWO

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
vJlQYk5k

Additional Information:
-1 OR 2+406-406-1=0+0+0+1 --

Additional Information:
-1 OR 2+236-236-1=0+0+0+1

Additional Information:
-1' OR 2+914-914-1=0+0+0+1 --

Additional Information:
-1' OR 2+282-282-1=0+0+0+1 or '9J7jHjSj'='

Additional Information:
-1" OR 2+210-210-1=0+0+0+1 --

Additional Information:



Additional Information:



Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(14),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(0),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:



Additional Information:



Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:



Additional Information:
RO4xZyuD'; waitfor delay '0:0:15' --

Additional Information:



Additional Information:
n2HpQRHN'); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
hd4dcDEY')); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
-5 OR 237=(SELECT 237 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
-5) OR 65=(SELECT 65 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
-1)) OR 486=(SELECT 486 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
-1)) OR 399=(SELECT 399 FROM PG_SLEEP(14))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
x4ZvP74B' OR 337=(SELECT 337 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
0VRZpjOv') OR 601=(SELECT 601 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
DrCdekI1')) OR 16=(SELECT 16 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
MQqu0z64')) OR 87=(SELECT 87 FROM PG_SLEEP(7))--

Additional Information:



Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:



Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@HJ5oY

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
HOW MANY STEPS PER INCH DO I SET IN MOTOR TUNING?

If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.

Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?

There are two main questions that we can answer with respect to motor torque and the mechanical advantage of lead screws, 1) What torque motor do you need to lift a particular weight, or 2) What maximum weight will my motor torque be able to lift.

This formula uses Newtons (N) as it's final unit. Use this with the included radius (R) to determine the torque. Newtons can easily be converted to lbs or ounces using online conversions.

Effort = Sf + (Load/(2 x pi x (R/p) x Se))

where:
p = pitch of the screw
Se = screw efficiency = Standard lead screw will be between 20% (.2) and 40% (.4)
Sf = static force. This is the force that is needed to start the movement. The number may be eliminated, but it is good to use a number in the 5 N to 20 N range.
Load = the expected load that the effort will need to carry (i.e., the router and the included axis assembly that the motor will need to lift)
R = radius of the lead screw


This formula is based on the "law of the machine"

The final effort amount with its unit of newtons and R will be the torque. For example, if the effort comes to 100 N (newtons) and the R is .5 inches, then you can assume that the effort is 50 N-in since it would take twice the effort to turn form the one inch mark from the center of the shaft.

Example:

Load = 90 N (20.2 lbs)
R = 1 inch since that is the length from the center of the shaft that the motor is rated
p = 1 inch / 13 = .08 inches

Effort = 5 N + (90 N / (2 x 3.14 x (1 / .08) x .2))
Effort = 5 N + (90 N / (6.28 x 12.5 x .2))
Effort = 5 N + (90 N / (15.7))
Effort = 5 N + (5.73 N)
Effort = 10.7 N = 2.4 lbs = 38.4 oz-in

I am putting the oz-in on the end because the formula considers the distance from the center of the shaft to be one inch.

Therefore, a 425 oz-in motor would be able to lift a 20.2 lb Router with its accompanying assembly. If the assembly and router is heavier, plug in the numbers and determine the effort required.

With a bit of algebra, the formula can be rewritten to find the load:

Load = (Effort - Sf) x (2 x pi x (R/p) x Se)

Another formula that does not consider friction at all:

Effort = (Load x p) / (2 x pi x R)

Lets see if we get similar results:

Effort = (20 lb x .08 inches) / (2 x 3.14 x 1)
Effort = 1.6 / 6.28 = .255 lbs = 4.08 oz-in

The results from both formulas appear to be very small because a 13 TPI screw will have enormous mechanical advantage.

It is evident that the first formula that does consider friction that we are loosely estimating is far more conservative than the second formula. Either way, even the most conservative formula shows that the 425 oz-in motor will handle very large weights. If you are using a lead screw with only two turns per inch, .5 inch pitch, you can determine the requirements with the first formula.

Example for a 10 TPI 5 start (2 turns per inch) lead screw:

Load = 90 N (20.2 lbs)
R = 1 inch since that is the length from the center of the shaft that the motor is rated
p = 1 inch / 2 = .5 inches

Effort = 5 N + (90 N / (2 x 3.14 x (1 / .5) x .2))
Effort = 5 N + (90 N / (6.28 x 2 x .2))
Effort = 5 N + (90 N / (2.512))
Effort = 5 N + (35.83 N)
Effort = 40.828 N = 9.18 lbs = 146.88 oz-in

Customer Response:
thank you so much

Additional Information:


Additional Information:


Additional Information:
how do i calculate torque of stepper motor if lead screw coupled to motor shaft and load applied by lead screw on plate is 100 kg by vertically

Additional Information:
Pls


Additional Information:
1m 16mmdiameter ball screws calculations


Additional Information:
What is the max load that 2 NEMA 17 stepper motors (spaced 2 feet apart, both will be pushing up on the same gantry) can lift while using a rod with the following specifications T8 OD 8mm Pitch 2mm Lead 4mm for each motor.

Additional Information:


Additional Information:
1

Click the link to add information to this solution:
HOW DO I DETERMINE THE AMOUNT OF SCREW WEIGTH THAT MY MOTOR CAN HANDLE

A 400w laser tube will not be a simple swap of our laser tube in our blackTooth or our spindle/laser hybrid. The overall size factor of a 80w - 400w is greatly larger than our 40w laser tube and will be the biggest issue. You will have to completely modify our units to retrofit a larger tube, which might be more costly than expected as well as more time consuming.

Click the link to add information to this solution:
Can I attach a 400w CO2 laser tube to you units (for cutting Stainless Steel at 1/8") ?

Yes, you can use a corner plate very easily. You will want to make a corner plate that has three independent plates that do not conduct with each other. Each of these plates will be connected to a different input (i.e. IN1 for X, IN2 for Y and IN3 for Z). The end mill or tool that is inserted into the spindle will connect to V- of the 24V power supply, or the DCM on the controller, which is connected to the 24V V-. Then, you can use the ref all home button on the program run screen of Mach3.

Click the link to add information to this solution:
[575] Is there a way to use an X,Y plate that will only be responsible for corner finding?

If you are referring to the polabs website that presents in another language, on that site, there is a button on the top right that says "options" with a down arrow. Click that and click turn off translation.

Click the link to add information to this solution:
[659] When clicking the manual link, it wont let me switch to the American version. How do I get that link?

Our CO2 laser cutters and engravers can cut birch plywood. Our 40 W lasers can cut birch plywood's at about a quarter inch. You will need a laser at least 80 W of power to cut that thickness of birch plywood. Our vertical laser XL would be able to handle that material.

CO2 lasers in general are not the best candidate for cutting thick woods. For thick materials, it is best to use a CNC router.

Click the link to add information to this solution:
I am planning to buy cutter engraver. How much power needed to cut .5" baltic birch plywood?