We currently cannot release or sell any plans at this current moment! We apologize for this inconvenience, however if you email us at customerservice@buildyourcnc.com. We can help you get the current parts you will need, for a fully functional 2.2kW z-axis assembly.

Click the link to add information to this solution:
I purachased a bluechick from you in 2011. I am upgrading from a Porter-cable router to a 2.2kw spindle. Can you supply me with drawings for the spindle mount so that I can cut the parts?

Absolutely, I can answer this type of question and anything other questions you may have with your new-to-you CNC router.

Additional Information:
20

Click the link to add information to this solution:
[789] Can you help me with selecting a power supply ( and a few other components ) for the stepper motors that came with a homemade CNC Router I just purchased.

We are developing plans for our machine, but they are not completed yet. Please let me know if you would like to be added to our list of customers wanting plans. Thanks,

Additional Information:
If you have specific questions regarding CAD, CAM and Control, please add another question to the customer service and I will answer them in detail.

Click the link to add information to this solution:
How do I get started I would like to build a cnc router. Making the machine I can do, but I am weak on cad,cam and mach3. I am thinking about a 4’x4’. Do you have plans I can buy?

Yes, if you give us a call, we can definitely help you. If you are looking to mod one of our 4'x8' machines, we can provide those changes for you. We have experience with meeting customers' needs where their application requires a machine with small or even large changes.

Click the link to add information to this solution:
I am looking to build a cnc router that will cut 4x8 i wanted to get a cnc kit with some mods i was wondering if there was someone in sales that can help me

Dealing with a 4' x 12' machine, our blackFoot kit will be your best option. Since our machines are only limited to the width but not length wise, you can add however much extra rail and roller chain to accommodate your extended length. Now adding our 4th axis kit (https://www.buildyourcnc.com/item/axes-4th) will be needed for your 4th axis (unless custom design is required).

These items will be the best requirements to build a 4' x 12' 4th axis machine.
Machine (either parallel/USB BoB): https://www.buildyourcnc.com/blackFoot48v40.aspx
4th axis: https://www.buildyourcnc.com/item/axes-4th

Click the link to add information to this solution:
Hi, I am very interested in this CNC Router unit [4'x8'], but from South Africa with our exchange rat [1$ =13,4 ZAR presently, make these kits out of reach. The plans part has been discontinued, but in our situation, would you reconsider and supply full plans and instructions at a cost? please let me know.

We are toying with the idea of re-introducing plans for some of our machines. Please give us a call to discuss further.

Click the link to add information to this solution:
Hi, I am very interested in this CNC Router unit [4'x8'], but from South Africa with our exchange rat [1$ =13,4 ZAR presently, make these kits out of reach. The plans part has been discontinued, but in our situation, would you reconsider and supply full plans and instructions at a cost? please let me know.

Yes, we can make a redLeaf system that has all 6A drivers for use with the 651 oz-in motors. We can also wire the electronics in a way that two of the drivers will use the pins of the same axis so that axis will drive two drivers and motors.

Click the link to add information to this solution:
I am building a cnc router with twin ball screws on the long axis and I will have a rotary axis as well. I need a 5 axis breaker board using only 4 axis total. Can you help me?

Yes, you can connect a THC, Torch Height Controller, with the Mach3 USB controller. The THC uses the inputs to determine if the z axis needs to move up or down according to the arc of the plasma torch. The THC connects its outputs to the inputs of the controller so the controller will be informed of the states of the plasma torch.

Click the link to add information to this solution:
I am interested in using the Mach3 USB interface board. I was wondering if there was a way to run a torch height controller with this board for use with a plasma cutter, and if so do you know of any THCs that will work. Thank you.

Consider the loads on each axis when choosing appropriate stepper motors. If your holding torque is maxed out at roughly 16oz/in (1lb/in), then you could use the NEMA 11 or 14. Also consider the shaft sizes and current ratings when choosing drivers that pair with the motors.

Click the link to add information to this solution:
I am planning to build a scratch CNC machine to do rotary engraving on writing pens. Can you recommend the parts I would need? I'm thinking NEMA 14 (11?) and 3/8" acme rod. Not sure which linear motion to use. I have an old lathe to use for the 4th axis.

Yes, you can send your electronics to us for repair, or retrofit to work with either Mach3, Mach4 or LinuxCNC. You can send us an email at customerService@buildyourcnc.com to set up your appointment.

Some of the types of CNC electronics we will consider.

- We will work on electronics from other manufacturers as long as you are ok with the Mach3, Mach4 or LinuxCNC control software for your CNC machine or CNC router.

- We will repair or retrofit used CNC electronics.

- Some customers find that electronics are overwhelming to put together so we will finish these electronics wiring and assembly for you.

The cost for these includes labor cost for the time it takes to finish the CNC electronics repair or retrofit and for any parts that need to be replaced or added.

Here is an example of CNC electronics that we worked on for a customer:

Click the link to add information to this solution:
I would like to use Mach3 instead of the software for my CNC router. Can you fix the electronics for me?

You can find the datasheets to our motors be going to the the stepping motor category page https://www.buildyourcnc.com/category/nema and selecting the motor. This will bring you to the product page for the motor and all of the motor information will be found there.

Click the link to add information to this solution:
I would like to design my own CNC router around one of your electronics bundles, either the 3 Axis - Heavy Gantry or 3 Axis - All Large Motors. Do you have the data sheets for the motors so that I can use the dimensions in my model?

Unfortunately, end mills will dull over time and need to be sharpened or repurchased. We do not currently offer any sharpening service, but we have a large selection of end mills you can find here http://www.buildyourcnc.com/ProductsEndMills.aspx

Click the link to add information to this solution:
Hi, I got two different bits I use alot. The 1/16th and 1/32 end mills. I use them alot for making signs. They seem to be getting dull. They are very expensive so I was wondering can you sharpen these bits? Do you have a service to do this? Thank you

What is the weight of the gantry, number of teeth on the drive sprocket and tooth pitch?

Click the link to add information to this solution:
I build a 3 axis router CNC the gantry is heavy in aluminium plate, witch plug n'play kit you suggest me 1 or two motor on the longest axis this will be drive with chain?

All of our controller will allow two steppers on any of the axes. Multiple stepper motors and drivers on a single axis is more a function of the way the stepper motor drives are connected to the output pins of the controller. To connect two stepper drivers to a single axis, you need to connect the output pins (dir and step) to each of the two stepper motor drivers.

Consider the controller on cost, features and how they are connected to the computer.

Out lowest cost controllers are:

Mach3 USB board - Has good features and uses the USB from the computer as the main connection
https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Parallel Breakout - The computer generates the main signals and this board conditions the signals for the drivers. Although it requires the parallel port from older computer, the board has the most broad compatibility with control software out there including Mach3 and LinuxCNC.
https://buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Highest cost but most feature rich:

Pokey57CNC - works with both Mach3 and Mach4
https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

Click the link to add information to this solution:
I am looking for a controller for a 3 axis dual Y stepper cnc machine. If at all possible I would like a list of the parts that will be needed. I prefer to go with an ethernet setup vs a parallel port.

If the sensors are NC (normally closed) you can wire them in series. If the sensors are NO (Normally Open) you can still wire them to the same input, but the wiring needs to be in parallel (like a ladder). I have more information on the following video:

Click the link to add information to this solution:
[788] Thanks for the oportunity to ask, I am building a cnc and using npn closed sensors could you help me with the conection of these, do i still connect them in series if i use more than two in each axis. Also you mention that a stop switch should be connected grd and input to the controller would that be done after the 24v power supply. Thanks r

CamBam specifically creates the g-code (machining operations) instructions to be loaded into Mach3. Make sure in your CamBam g-code file parameters, you are using the Mach3 post processor. If you have already done this, let me know. If you are not sure how to do this, let me know.

Click the link to add information to this solution:
I am having trouble connecting the cambam program with my Mach3 to my 4X8 Blackfoot CNC machine. Where can I get help on this issue. Have had my machine since 2015 and have not been able to use it. Thank you

Yes, you can use Mach4 wtih the Fabricator Pro CNC machine.

We have not designed a metal machine like the Fabricator Pro to lean more in the vertical orientation. Unfortunately, we haven't gotten any requests for that style of machine, and the greenLean, although a great machine and space saver, has not been our best seller.

If we get more interest in this type of machine, we would have no problem designing a machine like this.

Click the link to add information to this solution:
Do you have a model of the Fabricator pro that can be inclined line the lean? I have seen a few other machines on the market like this. Can we use Mach4 with the fabricator pro

This would totally work for that application. This cable carrier is used for any object that needs to move and carries some electrical or tubing within it. This cable carrier is great for cable management where you want to make sure the wires and tubes are in a position that you set, not where the wires and tubing want to go.

Click the link to add information to this solution:
[311] I am looking to use this type of thing with a pipe for theater. Where the pipe can be lowered and it would have electrical and signal cable inside. Is this good for that or should I look at something else?

Come on over and we will assist you in any way you need.

Click the link to add information to this solution:
I purchased a Blackfoot 4ft X 8ft in 2015 I have yet to run it. Do y’all offer any classes that can help me?? I would very much like to have this machine running. Thank you in Dayton Tx