You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
I PURCHASE BUILD YOUR OWN CNC MACHINE. WHERE CAN DOWNLOAD PDF SO PRINT LARGE

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
I purchase Build Your Own CNC Machine. where can i download PDF so i can print Large

You can download the Mach3 software at this link:
http://www.machsupport.com/software/mach3/

Click the link to add information to this solution:
where do I download the trial version of Mach 3

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
I have just brought your build your own cnc machine book and it talks about PDF downloads. Where do I find them please ?

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:


Additional Information:
Your book claims that plans are available for download, not purchase; the "plans" included in book are illegible and sometimes dimensions omitted - e.g. Fig 3.6 is cutout plan but dimensions are missing from dimension arrows. Your call to provide or not provide plans on the website but should not claim to if you will not. I'll hold my putting review on Amazon until I hear back from you. All I'm asking for is legible dimensions - PDF format will work but I'll ANY legible format. Thanks for your consideration.

Additional Information:
A PDF version of the plans are available here: https://www.buildyourcnc.com/Book.aspx

Click the link to add information to this solution:
I bought Kindle version of DIY CNC book; pictures are illegible. I can't find a place to download actual PDF plans on site. Can you please provide a link? Thanks

Looks like you are trying to screw me out of $30 plus tax as there will be no pdf files forthcoming unless I shell out another $255. Unless you provide the pdf files I will be forced to seek return of funds and will be notifying VISA, GOOGLE PLAY and the BBB doing so until I get satisfaction. If you are not going to honor your book title by providing complete usable information you should remove your book from the market place, or offer it for free. At this point I don't know how you justify screwing your customers like this, but this one ain't going to take it laying down.

Additional Information:
Official Buildyourcnc response:
Thanks for informing us of this issue. Have you looked at this part of the wabsite:
https://www.buildyourcnc.com/Book.aspx

The link to the "book" portion of the website is in the footer of every page of the website. If there is a problem with the pdf documents on any page of this portion of the website, please let me know here. Many thanks, Patrick Hood-Daniel

Click the link to add information to this solution:
I PURCHASED YOUR BOOK TO BUILD A CNC ROUTER, THE PLAN DRAWINGS ARE INDECIPHERABLE AND TEXT WITH THEM IS ILLEGIBLE. THERE NOTE REFER MDF PARTS LAYOUT 1 PDF, 2 PDF PLANS & CUT LIST DOWNLOADABLE FROM THIS SITE. WHERE THEY CAN'T FIND THEM?

You should use the linuxcnc.org site and click on the download menu item. They have an EU mirror as the main download option.

Click the link to add information to this solution:
AM STRUGGLING TO DOWNLOAD THE LINUX EMC2 FREEWARE. MY GET INTERRUPTED AT LAST MINUTE. IS THERE ANOTHER WAY OR PLACE WHERE COULD MAYBE TRY IT FROM?

Thank you Mario... but our droids are in another castle!

Click the link to add information to this solution:
So I went to Tatooine and still didn't find the droids I was looking for, where next?

If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.

Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?

I created videos that explain how to setup and install the USBasp here:

Click the link to add information to this solution:
I have the AVR programmer USBasp. Should I download and use the sparkfun driver as your tutorial states?

You can find the latest version here http://www.planet-cnc.com/index.php?page=download

Additional Information:

Click the link to add information to this solution:
Where can I download the USBCNC software? The https://buildyourcnc.com/files/CNCUSB_20130308.zip link is dead.

Depending on the specific software you have bought, it might require you to download the main software via their main website. While we will send you the license via email, to unlock the complete software capabilities.

Click the link to add information to this solution:
I ordered software for download and it hasn't arrived. It has been several hours. Please advise on the status.

Thanks for the interest in the book. The can find the book supplemental videos and information here: https://www.buildyourcnc.com/Book.aspx

Click the link to add information to this solution:
I have the book and I am not able to find on the website, the link to download the spreadsheet that has the parts cut list. I also cannot find the link to the construction videos.

To connect the stepper motor drivers to the Mach3 USB interface card, you will need to follow the wiring diagram here: https://www.buildyourcnc.com/Documents/Electric%20Wiring%20Diagram.pdf
which can be found here: https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board along with all of the other manuals associated with that interface card.

Please note that the DC+ and DC- on that wiring diagram (power supply to thye stepper motor drivers) is not correct. The DC- is connected to GND on the drivers and the DC+ is connected to VCC on the drivers. Typically, the DC+ on the power supply is labeled V+ and the DC- is labeled either COM or V-.

If you are having any issues with the wiring, please let me know and I will elaborate. Thanks.

Click the link to add information to this solution:
Yawl sold me a ST-USB MOTION CARD I have surched all your electronics and can't find wring instructions I need to know where to connect X,Y and Z to this controler

The connections between the driver and the breakout board(USB/Parallel)22-24 AWG wire is preference also going from the potentiometer going to LSPS(laser power supply) , now going from the power supply to the drivers/laser power supply 16-18 AWG wire is our preference.

Click the link to add information to this solution:
I'm about to order your laser cutter , item 279 and a little confused.. in your faq it states you need wire and connectors for assembly, can you be specific on amount and guage of wire or tell me where to find that information?

Looks like you are trying to screw me out of $30 plus tax as there will be no pdf files forthcoming unless I shell out another $255. Unless you provide the pdf files I will be forced to seek return of funds and will be notifying VISA, GOOGLE PLAY and the BBB doing so until I get satisfaction. If you are not going to honor your book title by providing complete usable information you should remove your book from the market place, or offer it for free. At this point I don't know how you justify screwing your customers like this, but this one ain't going to take it laying down.

Additional Information:
Official Buildyourcnc response:
Thanks for informing us of this issue. Have you looked at this part of the wabsite:
https://www.buildyourcnc.com/Book.aspx

The link to the "book" portion of the website is in the footer of every page of the website. If there is a problem with the pdf documents on any page of this portion of the website, please let me know here. Many thanks, Patrick Hood-Daniel

Click the link to add information to this solution:
I purchased your book to build a cnc router, the plan drawings are indecipherable and text with them is illegible. There is a note to refer to MDF Parts Layout 1 PDF, MDF Parts Layout 2 PDF and MDF Plans & Cut List PDF downloadable from this site. Where are they I can't find them?

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
Just want to know where could I download the CNC machine spreadsheet and the Parts Layout PDF files. Had tired www.buildyourcnc.com/book.aspx but was unable to locate the said files.

The best way to determine how to control your VFD using Mach4 is to read the MAch4 manual found here:
http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Installation%20Manual.pdf

You will find that there a a few ways to control the spindle/VFD on your CNC machine or CNC Router.
- The first and easiest is to have your VFD's power controlled by a relay. This will allow your spindle to have on/off control through Mach4 with an output pin.
- The second is to have a controller output a DAC voltage between 0-10 volts to control speed on the VFD/Spindle. There is a termial on the VFD to receive this signal line. The controller will also have an output that outputs a high or low and that can control the on/off on the VFD.
- The third, and more difficult of the three methods is to use a USB to Serial adapter (USB to USART or RS-485). The Computer plugs into the adapter using a USB cable and the adapter uses the RX/TX to connect to the VFD's terminals for communication. This will provide a great amount of control. Mach4 will need a plug-in to make this option work.

Click the link to add information to this solution:
Where can I find information on controlling my VFD through Mach4?

We could not guarantee, nor say, whether or not your current software would be able to utilize the USB breakout board. Our USB breakout board is designed for use with Planet CNC software found here, http://www.planet-cnc.com/index.php?page=software

As far as we know, this is the only CNC Controller software that operates on a USB breakout controller.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I want to change my old DSP controller and break out board with new one in your site that support usb it is possible ? if yes can we contact us to talking about details ?