Wood dust can cause problems in a Variable Frequency Drive (VFD) like the Huanyang 2.2 kW 220V 400Hz unit. If wood dust gets inside the VFD, it can collect on important parts like the bakelite component on the heat sink. This can cause the part to get too hot because the dust traps the heat. When the bakelite component gets too hot, it can break. The dust can also block the airflow that helps to keep the VFD cool, making the heat problem worse. It's important to keep the VFD clean and away from wood dust to prevent these issues.

Click the link to add information to this solution:
Can Wood Dust in a VFD cause it to blow a bakelite component mounted on the heat sink in the lower part of the unit? Mine was a Huanyang 2.2 kw 220v 400HZ

The best wiring diagram that can be used for the redLeaf and redSprout CNC computer system would be found on instruction #1 (datasheet for the breakout board) on this page: https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
Hi I live in South Africa and want to know if i can buy a wiring and component diagram for the readleaf plug and play computer system?

The best wiring diagram that can be used for the redLeaf and redSprout CNC computer system would be found on instruction #1 (datasheet for the breakout board) on this page: https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
Hi I live in South Africa and want to know if i can buy a wiring and component diagram for the readleaf plug and play computer system?

A CO2 laser will not be suitable for cutting steel. You would likely need a very powerful fiber laser to cut steel, and even then you have to take into consideration the reflective properties of steel which can pose danger to the machine.

Click the link to add information to this solution:
Trying to cut 24, and 26 G steel sheets in various shapes. Will CO2 laser be enough? And will it cause alot of heat in the product?

The shipping is typically 2 to 3 business days from the order as we provide a free configuration and testing on video for the VFD and spindle pair. After the test is complete, the VFD and spindle is shipped.

Here is an example of a VFD and spindle test I do for customers:
https://www.instagram.com/tv/CFrLF2_Dn5c/?utm_source=ig_web_copy_link

Click the link to add information to this solution:
I ordered a 2.2 kw 220 v Huanyang spindl eand I live in central Connecticut, how long will the free shipping option take?

BYCNC Response:
The book build was intended to be 20 inches x 40 inches. Larger machines were designed after the book build was introduced so customers would have the option to go bigger than what the book offered. Check out our larger machines on the website as the machines sizes range from 1 foot x 3 feet all the way up to 6 feet x 12+ feet.

User Response:
I'm not wanting to spend $3,000+ on a machine, I want to build one that will do a 4x8 sheet of wood. Will the plans in the book scale up?

BYCNC Response:
It is possible to scale the book build up, but the rigidity of the gantry would be questionable at that span, even if the height of the gantry structure were to be increased. The gantry design would need to be modified to become a box shape rather than a flat configuration. The kits on the site were design for those wanting a larger machine.

Click the link to add information to this solution:
I BOUGHT YOUR BOOK AND WAS HOPEING IT HAD PLANS OR DIMENTIONS ON HOW TO BUILD A CNC HOLD 4X8 SHEET OF PLY. WILL THE IN SCALE UP?

If you purchased a 220 volt VFD (Variable Frequency Drive), you will need to use a 220 volt outlet. A VFD that has an input voltage rating of 220 volts will not work with 110 volts being applied to the VFD. We do sell 110 volt VFDs but you will also need a spindle that pairs with the 110 volt VFD.

Click the link to add information to this solution:
Good morning, we purchased the vfd with 220v but here in south america the standard is 110v, will it work? or should I adapt one power outlet to 220v

It's a question of signal strength. Interference has been observed only very close to transmitting antennas where there is strong signal strength. Interference has been observed in some medical electronics due to hand-held cell phones. Roof-top antennas are some distance away from any susceptible electronics. In addition to proximity, the directionality of the antennas is important. Most rooftop antennas have strong gain in the forward direction—towards the horizon—and very low gain in the vertical direction. Finally, there are layers of building materials shielding the interior areas from the rooftop antennas. Proximity, directionality, shielding—all go towards reducing the signal strength inside a building due to the antennas on the roof so that interference is not generally an issue. This does not mean that you cannot receive the signals from the roof top antennas inside the building; it simply means that the received signals are not strong enough to cause interference. Gary H. Zeman, ScD, CHP

Click the link to add information to this solution:
HOSPITALS DO NOT ALLOW CELL PHONE USE DUE TO POTENTIAL INTERFERENCE. LAST WEEKEND I WAS IN A HOSPITAL WHERE THE TOP OF BUILDING STUDDED WITH TOWER ANTENNAS. WHY IT THAT PHONES WOULD CAUSE INTERFERENCE, BUT ANTENNAS NOT?

Sure, not a problem at all. You will need to call our office and provide your information so that we can change the correct order.

Our phone number can be seen by hovering over the "Need Help?" at the top right of each page.

Click the link to add information to this solution:
hi, would like to make a change on my order, i purchase this part 2.2kW Spindle with 220V Inverter $528.00, and would like to make it for 110 volts instead of 220v. please

We can provide support to electronic components that we sell. We are unable to connect or diagnose electronics that we don't offer.

Additional Information:
We can provide solutions to products that we sell. For instance, we can inform how to connect a spindle's VFD to Mach3 using a RS-485 serial communication method.

Click the link to add information to this solution:
If I bring my 6090 with Huanyang VFD/spindle and G540 can you wire vfd/540 together and get it talking to mach3 for me?

The 2.2kW spindle will have the same amount of torque and strength using either the 110V or the 220V inverter. Nothing will significantly change in either application since the 110V inverter has a small step up transformer which will increase the voltage from 110V to 220V to run the spindle efficiently.

Additional Information:
I'd like confirmation on this -- isn't there a cost in efficiency to having the 110v step up to 220v?

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Click the link to add information to this solution:
Good morning, I would like to know if the strength of the 2.2kw spindle is weaker when using the 110V version of the VFD. Does it have the same power as the 220V version VFD?

Identify the Control Signals: First, determine which control signals from the DB25 interface card are used for spindle speed control. Typically, these are PWM (Pulse Width Modulation) signals or analog voltage signals.

VFD Configuration: Your VFD should be configured to accept the type of control signal your DB25 card provides. This involves setting parameters in the VFD that correspond to the type of input signal it will receive for speed control.

Wiring: Connect the appropriate output pins from the DB25 card to the input terminals on the VFD. This usually involves connecting the PWM or analog output to the corresponding input on the VFD. Make sure to consult the manuals for both your VFD and interface card for specific wiring details.

UCCNC Settings: Configure UCCNC to output the correct type of signal (PWM or analog) that matches your VFD's configuration. This is done through the software's spindle setup section.

Test and Adjust: Run some tests to ensure that the spindle speed is being correctly controlled by UCCNC. You might need to tweak settings in either the VFD or UCCNC for optimal performance.

Click the link to add information to this solution:
I am looking at purchasing your 2.2 kw water cooled spindle. I'm assuming it comes with the VFD. I have a rotary phase converter in my shop. Are these spindles 3 phase? And if so, can I bypass use of the VFD and control the spindle speed by the CAM software instead? Or is the VFD an absolute necessity to use on the spindle?

Been pretty busy over here. Hard to fit in the time, but I know it is an important video and I will start on it very soon. My apologies for the wait.

Additional Information:
I undersand. It looks like you're juggling a lot of balls over there I'm just really anxious to get this 5x machine up and running. Cheers.

Click the link to add information to this solution:
Hey Guys, Just checking in to see how part 2 for the following video was coming. Cheers. https://youtu.be/JWACS6dMMQ0

Ok, I will check the YL600 documentation Monday 4/3 and provide the answer here.

Additional Information:


Additional Information:
I also received one of these and the button labels do not even match your programming instructions as stated on your web set. Please provide updated instruction to match the model shipped with the correct button names to press in The programming process.

Additional Information:
7/15/17 - I have exact problem. I do not see the solution posted???

Additional Information:
Mine is a 2.2Kw YL-620 connected to a 1.5Kw spindle.

Code Address Function Set Range &Function Explanation Factory Setting User Set Vendor Suggested As shipped Code Address Decimal
P00.00 0 Main Frequency 0-120HZ(400HZ） 50.0HZ 　400 60 399.6 P00.0 0
P00.01 1 Start / stop command source 0: Operator board 0 0　 0 P00.1 1
1：From external end control Electric machinery,operation panel STOP key effective
2：From external end son control Electric machinery,operation panel STOP key invalid
3：from (Modbus Rs485) control Electric machinery
4：By user application program control Electric machinery
P00.02 2 Reserved 　 0 　 0 P00.2 2
P00.03 3 Stopping Mode 0：Decelerating stop 0 0　 1 P00.3 3
1：Coasting stop 10
2：DC brake stop 0.2
P00.04 4 VF:Highest output frequency 1.0-120.0HZ(400HZ） 50.0HZ 400 60 400 P00.4 4
P00.05 5 VF:Maximum Voltage Output Frequency 5.0-120.0HZ(400HZ） 50.0HZ 400 60 400 P00.5 5
P00.06 6 VF:Highest output Voltage 10.0%-150.0% 100.00% 100.00% 100.00% 100 P00.6 6
P00.07 7 VF:Middle Frequency 1.0-120.0HZ(400HZ） 3.0Hz 3.5Hz 3.0Hz 3.5 P00.7 7
P00.08 8 VF:Middle Voltage 10.0%-100.0% 10% 20% 10% 10 P00.8 8
P00.09 9 VF:Min Frequency 0-120.0HZ(400HZ） 0.2HZ 0.2Hz 0.2Hz 0.2 P00.9 9
P00.10 10 VF:Min Voltage 0%-100.0% 5% 10.00% 5.00% 5 P00.10 10
P00.11 11 Analog Input quantity 1 Regulation Multistage velocity 0%-100% 100 100 100 100 P00.11 11
P00.12 12 VF :Curve Setting 0-4 0 0 P00.12 12
P00.13 13 Parameter Lock 0: lnvalid 0 0 P00.13 13
1: Valid
10: Restore the factory setting No other function
P00.14 14 Reserved 0 0 P00.14 14
P00.15 15 Power on Time prohibit External end son Start-up 0:Power on time,allow External end input effective level,start-up Electric machinery 0 0 P00.15 15
1:Power on time,Not allow
P00.16 16 0: FWD(X5)yes,Positive run the 0 P00.16 16
1: REV(X6) Determine direction : Open Yes
2:X_EF=EF,X_REV(X5)_DIR=DIR,FWD(X6)=
3: Stop ,FWD(X5) turn off Instantaneous
4: FWD(X5) turn off Instantaneous
5: FWD(X5) turn off Instantaneous
6: Stop ,FWD(X5) turn off Instantaneous
7: REV(X6)When open,FWD(X5)Start-up
P00.17 17 Many function input X1 function Choice ####################################### ####################################### 1 1 P00.17 17
P00.18 18 Many function input X2 function Choice 1.0HZ 1 P00.18 18
P00.19 19 Many function input X3 function Choice 1 P00.19 19
P00.20 20 Many function input X4 function Choice 1 P00.20 20
P00.21 21 External Terminal rise/Slow down increment 0-120HZ(400HZ) 1.0HZ 1 P00.21 21
P00.22 22 External Terminal rise/Slow down time interval 0.2 0.2 P00.22 22
P00.23 23 Physics amount display Proportion constant 0-999.9% 100.00% 100 P00.23 23
P00.24 24 After power supply, display project choice 0: Display current target frequency 0 0 P00.24 24
1:Display Electric machinery run frequency.
2:Display Electric machinery run current.
3:Display input AC voltage
4:Display mother Line voltage
5:Display output voltage
6:Display speed paragraph Number SP x
7:Display inverter temperature t xx
8:Display input signal X1-X3/output signal
9:Display user variable
10:Display user Count value
11:Display temporary debugging variable
12:Display automatic multi segment run step and time
P00.25 25 Display project automatic Return delayed time (10/S) 0:No,Automatic return;1-6delayed 10-60S Back Return 1 1 P00.25 25
P01.00 256 REV Rotation Select 0: Rev Run Enable 0 0 P01.0 256
1: Rev Run Forbidden 0
P01.01 257 Electric machinery Reversing wait for time 0 P01.1 257
P01.02 258 Deceleration Prevention overvoltage setting(%) 130 130 P01.2 258
P01.03 259 Accelerated Prevention overcurrent setting(%) 130 130 P01.3 259
P01.04 260 Overcurrent Set up (%) 200 200 P01.4 260
P01.05 261 Overload protection Set up (%) 130 130 P01.5 261
P01.06 262 Overload protection time Set up (s) 120 120 P01.6 262
P01.07 263 Undervoltage protection Set up (%) 80 80 P01.7 263
P01.08 264 Overvoltage protection Set up (%) 150 150 P01.8 264
P01.09 265 After shutdown, start DC Brake voltage Setup (%) 15 15 P01.9 265
P01.10 266 After shutdown, End DC Brake voltage Setup (%) 0 0 P01.10 266
P01.11 267 After shutdown, DC Braking Time Set up 2 2 P01.11 267
P01.12 268 After shutdown, DC Braking Initial Frequency Set up 0.6 0.6 P01.12 268
P01.13 269 Before start , input DC brake voltage set up (%) 20 20 P01.13 269
P01.14 270 Before start , End DC Brake voltage Set up (%) 15 15 P01.14 270
P01.15 271 Before start , DC Braking Time Set up 3 3 P01.15 271
P01.16 272 Direct start Initial frequency (Improve starting torque ) 100 100 P01.16 272
P01.17 273 Direct start Initial frequency Hold time 0 0 P01.17 273
P01.18 274 power failure frequency decline 80 80 P01.18 274
P01.19 275 The power down frequency decline rate 5 5 P01.19 275
P01.20 276 Restart No load time 10 10 P01.20 276
P01.21 277 Restart voltage rise time 200 200 P01.21 277
P02.00 512 When speed up torque will increased 　 100　 100 100 60 P02.0 512
P02.01 513 Deceleration time - Torque Boost 　 100　 100 100 60 P02.1 513
P02.02 514 Accelerate curve Choice 0　 0 P02.2 514
P02.03 515 Deceleration curve Choice 0　 0 P02.3 515
P02.04 516 Avoid the f requency 1 20 400 P02.4 516
P02.05 517 Avoid the f requency 2 30 30 P02.5 517
P02.06 518 Avoid the f requency 3 　 40 40 P02.6 518
P02.07 519 Avoid the f requency Width 　 0 0 P02.7 519
P02.08 520 Window frequency 1 45 45 P02.8 520
P02.09 521 Window frequency 2 50 50 P02.9 521
P02.10 522 ? 400 P02.10 522
P03.00 768 RS485 Communication Baud Rate 0: 1200Bps 5 4 P03.0 768
1: 2400Bps
2: 4800Bps
3: 9600Bps
4: 19200Bps
5: 38400Bps
6: 57600Bps
P03.01 769 RS485 Communication Addresses 1-254 10 10 P03.1 769
P03.02 770 0: 8 bit data, 1 stop bits, odd parity 2 2 P03.2 770
1: 8 bit data, 1 stop bits, parity check
2: 8 bit data, 1 stop bit, no parity
3: 8 bit data, 2 stop bits, odd parity
4: 8 bit data, 2 stop bits, parity check
5: 8 bit data, 2 stop bit, no parity
P03.03 771 Communication error handling 0 P03.3 771
P03.04 772 Communication error tolerance time 20 P03.4 772
P03.05 773 4-20mA Break detection time 0 P03.5 773
P03.06 774 Panel potentiometer,Lower limit of AD norm 3 P03.6 774
P03.07 775 Panel potentiometer,Upper limit of AD specification 1020 1015 1015 P03.7 775
P03.08 776 Panel potentiometer, frequency given of lower limit 0.0HZ 0 0 P03.8 776
P03.09 777 Panel potentiometer, frequency given of Upper limit 0-120HZ(400HZ） 60.0HZ 400 　60Hz 400 P03.9 777
P03.10 778 Analog lnput 1 AD lower limit 0-1023 3.0Hz 　60Hz 3 P03.10 778
P03.11 779 Analog lnput 1 AD Upper limit 0-1023 1020 1010 1010 P03.11 779
P03.12 780 Analog lnput 1 frequency given lower limit 0.0HZ 0 P03.12 780
P03.13 781 Analog lnput 1 frequency given Upper limit 60.0HZ 400 400 P03.13 781
P03.14 782 Analog lnput 2 AD lower limit 3.0Hz 3 P03.14 782
P03.15 783 Analog lnput 2 AD Upper limit 1020 1010 1010 P03.15 783
P03.16 784 Analog lnput 2 frequency given lower limit 0.0HZ 0 P03.16 784
P03.17 785 Analog lnput 2 frequency given Upper limit 60.0HZ 60 P03.17 785
P03.18 786 Analog output correlation 0 0 P03.18 786


P03.19 787 Analog output gain setting 100 100 P03.19 787
P04.00 1024 Mo analog multiplier output frequency multiplier 10 10 P04.0 1024
P04.01 1025 Mo1 Function Options 0 0 P04.1 1025
P04.02 1026 Mo2 Function Options 1 1 P04.2 1026
P04.03 1027 Multi-function Relay 1 Function selection 0:fault Yes Electric , otherwise power failure 0 2 2 2 P04.3 1027
P04.04 1028 Multi-function Relay 2 Function selection 1:Running Yes Electric ,otherwise power failure 3 3.0Hz 3 P04.4 1028
2: Reserved
3: Arbitrary frequency arrival Time, have Electric,Related to P02-10 settings
4: , The power down Time,have Electric
5:, low voltage Time, have Electric
6:, Overvoltage Time, have Electric
7: Overcurrent Time, have Electric
8: Nonzero velocity Time,have Electric
9:, DC brake Time, have Electric
10: Over torque Time, have Electric
11: External interrupt fault Time, have
12: Forward Time, have Electric
13: Reversal Time, have Electric
14: Move Time, have Electric
15: Accelerate Time, have Electric
16: Deceleration Time, have Electric
17: Constant speed Time, have Electric
18:X1 close Time, have Electric
19:X2 close Time, have Electric
20:X3 close Time, have Electric
21:X4 close Time, have Electric
22:X5 close Time, have Electric
23:X6 close Time, have Electric
24: Forward and bus voltage greater than 400V Time, have Electric
25: Reverse and bus voltage greater than 400V Time, have Electric
P04.05 1029 Multi-function Relay 1 Action close Delayed 0-65.5 S 0 0 P04.5 1029
P04.06 1030 Multi-function Relay 1 disconnect delay action 0-65.5 S 0 0 P04.6 1030
P04.07 1031 Multi-function Relay 1 Action close Delayed 0-65.5 S 0 0 P04.7 1031
P04.08 1032 Multi-function Relay 1 disconnect delay action 0-65.5 S 0 0 P04.8 1032
P04.09 1033 Stall rotor detection time 0-65.5 S 1 1 P04.9 1033
P04.10 1034 Switch amount (Di) sampling time 0-1000mS 8 24 24 P04.10 1034
P04.11 1035 Stopping Mode 0:Decelerating stop 0 0 P04.11 1035
1:Coasting stop
P05.00 1280 PID Output Upper limit frequency 50 50 P05.0 1280
P05.01 1281 PID Output lower limit frequency 25 25 P05.1 1281
P05.02 1282 PID Given Source 0 0 P05.2 1282
P05.03 1283 PID Values Given 0.2 0.2 P05.3 1283
P05.04 1284 PID Output characteristic(FOR /REV) 0 0 P05.4 1284
P05.05 1285 PID Output characteristic (FOR/REV) 0 0 P05.5 1285
P05.06 1286 PID Proportional Gain 0-100.0 50 50 P05.6 1286
P05.07 1287 PID Integration Time Ti 0-100.0 0-100.0 50 50 P05.7 1287
P05.08 1288 PID Derivative Time Td 0-100.0 0-100.0 50 50 P05.8 1288
P05.09 1289 PID Deviation Limit 0-50.0 5 5 P05.9 1289
P05.10 1290 PID Integral upper limit 50 50 P05.10 1290
P05.11 1291 PID Given Change Time 0-600.0 1 1 P05.11 1291
P05.12 1292 PID Feedback Filter Time 0 0 P05.12 1292
P06.00 1536 Acceleration Time 0　 0 P06.0 1536
P06.01 1537 Accel.Time 1 0.1-6553.5 5.0 9 　5.0 5 P06.1 1537
P06.02 1538 Decel. Time 1 0.1-6553.5 5.0 8.6 　5.0 5 P06.2 1538
P06.03 1539 Accel.Time 2 0.1-6553.5 0.1-6553.5 2 2 P06.3 1539
P06.04 1540 Decel. Time 2 0.1-6553.5 0.1-6553.5 2 2 P06.4 1540
P06.05 1541 Accel.Time 3 0.1-6553.5 0.1-6553.5 2 2 P06.5 1541
P06.06 1542 Decel. Time 3 0.1-6553.5 0.1-6553.5 2 2 P06.6 1542
P06.07 1543 Accel.Time 4 0.1-6553.5 0.1-6553.5 2 2 P06.7 1543
P06.08 1544 Decel. Time 4 0.1-6553.5 0.1-6553.5 2 2 P06.8 1544
P06.09 1545 Accel.Time 5 0.1-6553.5 0.1-6553.5 2 2 P06.9 1545
P06.10 1546 Decel. Time 5 0.1-6553.5 0.1-6553.5 2 2 P06.10 1546
P06.11 1547 Accel.Time 6 0.1-6553.5 0.1-6553.5 2 2 P06.11 1547
P06.12 1548 Decel. Time 6 0.1-6553.5 0.1-6553.5 2 2 P06.12 1548
P06.13 1549 Accel.Time 7 0.1-6553.5 0.1-6553.5 2 2 P06.13 1549
P06.14 1550 Decel. Time 7 0.1-6553.5 0.1-6553.5 2 2 P06.14 1550
P06.15 1551 Accel.Time 8 0.1-6553.5 0.1-6553.5 2 2 P06.15 1551
P06.16 1552 Decel. Time 8 0.1-6553.5 0.1-6553.5 2 2 P06.16 1552
P06.17 1553 Jog Acceleration Time 0.1-6553.5 0.1-6553.5 2 2 P06.17 1553
P06.18 1554 Jog Deceleration Time 0.1-6553.5 0.1-6553.5 2 2 P06.18 1554
P07.00 1792 Frequency 1 0-120HZ(400HZ) 50HZ 50 50 P07.0 1792
P07.01 1793 Frequency 2 50HZ 45 45 P07.1 1793
P07.02 1794 Frequency 3 50HZ 40 40 P07.2 1794
P07.03 1795 Frequency 4 50HZ 35 35 P07.3 1795
P07.04 1796 Frequency 5 50HZ 30 30 P07.4 1796
P07.05 1797 Frequency 6 50HZ 25 25 P07.5 1797
P07.06 1798 Frequency 7 50HZ 20 20 P07.6 1798
P07.07 1799 Frequency 8 50HZ 15 15 P07.7 1799
P07.08 1800 Frequency source selection 1 0: Operator board (parameter: P03.06~P03.09) 0 0 P07.8 1800
P07.09 1801 Frequency source selection 2 1: Pre-set Freq, P00.00 Set frequency value,Operation panel keyboard,Can be set directly 2 2 P07.9 1801
P07.10 1802 Frequency source selection 3 2:No. X paragraph frequency P07.00~P07.07 2 2 P07.10 1802
P07.11 1803 Frequency source selection 4 3: Analog Input. :P03.10~P03.13) 2 2 P07.11 1803
P07.12 1804 Frequency source selection 5 4: external simulation amount 2 (VI2) 2 2 P07.12 1804
P07.13 1805 Frequency source selection 6 5: (Modbus Rs485)Given frequency 2 2 P07.13 1805
P07.14 1806 Frequency source selection 7 6: User application program, given frequency 2 2 P07.14 1806
P07.15 1807 Frequency source selection 8 7:( Pid)Output frequency 2 2 P07.15 1807
Other: Reserved
Note:three control methods (P07.08) 1808 1.The motor speed is controlled by the operating panel P07.16 1808
2.Motor speed control by external terminals (Potentiometer 10K). P00.01 set to 1, P07.08 set to 3
3.Motor speed control by external terminals. P00.01 set to 1,P07.08 set to 1.
P07.16 1809 Jogging Frequency FORWARD 0-120HZ(400HZ) 15.0HZ 15 P07.17 1809
P07.17 2048 Jogging Frequency REV 0-120HZ(400HZ) 15.0HZ 13.0Hz 13 P08.0 2048
P08.00 2049 Automatic many paragraph Running: Running direction Binary data format to set the direction of operation, see (the automatic multi segment operation, the operation of the direction set table) 0　 0 P08.1 2049
P08.01 2050 Automatic many paragraph Running: mode Choice 0:Automatic multi segment operation is invalid; 0 0 P08.2 2050
1:After execution complete,Stop;
2:After execution complete,Keep the last running state,Continued running;
3:After execution complete, Repeated execution.
P08.02 2051 Automatic many paragraph Running time Units:S/M 0:S;1:M 0 0 P08.3 2051
P08.03 2052 Automatic many paragraph Running: No.1 paragraph Running time Automatic multi-section run time,Set up Section speed run time。Time units are determined by P08.02 Decision。Set run is 0,Indicates that this section is not executed. 10 1 1 P08.4 2052
P08.04 2053 Automatic many paragraph Running: No.2 paragraph Running time 10 1.5 1.5 P08.5 2053
P08.05 2054 Automatic many paragraph Running: No.3 paragraph Running time 10 1 1 P08.6 2054
P08.06 2055 Automatic many paragraph Running: No.4 paragraph Running time 10 1.5 1.5 P08.7 2055
P08.07 2056 Automatic many paragraph Running: No.5 paragraph Running time 10 1 1 P08.8 2056
P08.08 2057 Automatic many paragraph Running: No.6 paragraph Running time 10 1.5 1.5 P08.9 2057
P08.09 2058 Automatic many paragraph Running: No.7 paragraph Running time 10 1 1 P08.10 2058
P08.10 2304 Automatic many paragraph Running: No.8 paragraph Running time 10 1.5 1.5 P09.0 2304
P09.00 2305 frequency Range(%) 0-200% 0 0 P09.1 2305
P09.01 2306 frequency wave Range(%) 0-400% 200 30 30 P09.2 2306
P09.02 2307 frequency Rise time(S) 0.1-999.9 S 6.0 S 6 P09.3 2307
P09.03 2560 frequency decline time(S) 0.1-999.9 S 5.0 S 5 P10.0 2560
P10.00 2561 Counter reload,value 1000 1000 P10.1 2561
P10.01 2562 Counter current value 0 0 P10.2 2562
P10.02 2563 Timer reload,value 1000 1000 P10.3 2563
P10.03 2816 Timer current value 0 0 P11.0 2816
P11.00 2817 Output Status 1 1 P11.1 2817
P11.01 2818 Output Voltage (V) 0 0 P11.2 2818
P11.02 2819 Output Current (A) 5 5 P11.3 2819
P11.03 2820 Output Frequency (Hz) 50 50 P11.4 2820
P11.04 3072 Current Heatsink Temperature 25 25 P12.0 3072
P12.00 3073 Rated Motor Current 5 5 P12.1 3073
P12.01 3074 Rated Motor Voltage 220 220 P12.2 3074
P12.02 3075 Motor Pole number 2-100 2 2 P12.3 3075
P12.03 3076 Motor no-load current 10 10 P12.4 3076
P12.04 3077 Motor no-load current detection time(S) 10 10 P12.5 3077
P12.05 3078 Converter rated current(A) 5 5 P12.6 3078
P12.06 3079 Converter rated Voltage(V) 220 220 P12.7 3079
P12.07 3080 DC bus output voltage% 140 130 P12.8 3080
P12.08 3081 Heat sink over temperature protection point 70 75 P12.9 3081
P12.09 3082 Radiating fin temperature sensor configuration 1 1 P12.10 3082
P12.10 3083 Abnormal reset implement wait time 120 120 P12.11 3083
P12.11 3084 Fan Function Pattern 0:Motor running tine, start fan; 1 1 P12.12 3084
1:When the fan operating temperature (P12.12) is exceeded,Instant start fan; When the temperature is lower than the fan temperature point,Delay about 1 minutes to close the fan;
2:Unconditional forced start fan;
3:Fan Inoperation;
P12.12 3085 Cooling fan operating temperature 55 45 50 P12.13 3085
P12.13 3086 Fan Testing 0 0 P12.14 3086
P12.14 3087 Bypass relay closed detection 0 0 P12.15 3087
P12.15 3088 Bypass Relay delay time 1.5 1 P12.16 3088
P12.16 3089 Power on delay timer initial value(S) 50 50 P12.17 3089
P12.17 3090 Electric current sensor To configure 1 1 P12.18 3090
P12.18 3091 Automatic stable pressure function Choice 1 1 P12.19 3091
P12.19 3092 PWM Frequency 2.0-15.0KHZ (110V13.0KHZ 220V11.0KHZ 380V6.0KHZ) 8.0KHZ 13.0KHz 13 P12.20 3092
P12.20 3328 SVPWM Pattern 0:Three-phase asynchronous motor, 0 0 P13.0 3328
1:Two-phase asynchronous motor (Single-phase motor, 90 degree phase difference,Starting capacitor)
P13.00 3329 103 P13.1 3329
P13.01 3330 600 P13.2 3330
P13.02 3331 1 P13.3 3331
P13.03 3332 16.24 P13.4 3332
P13.04 3333 1 P13.5 3333
P13.05 3584 0 P14.0 3584
P14.00 3585 35 P14.1 3585
P14.01 3586 0.2 P14.2 3586
P14.02 3587 1 P14.3 3587
P14.03 3588 0 P14.4 3588
P14.04 3589 0 P14.5 3589
P14.05 3590 100 P14.6 3590
P14.06 3591 1900 P14.7 3591
P14.07 3592 2000 P14.8 3592
P14.08 3593 59999 P14.9 3593
P14.09 3594 5 P14.10 3594
P14.10 3595 20 P14.11 3595
P14.11 3596 0 P14.12 3596
P14.12 3597 0 P14.13 3597
P14.13 3598 0 P14.14 3598
P14.14 3599 0 P14.15 3599


Additional Information:
Sorry, that is a paste from a spread sheet, you may have to do some formatting or paste it into a spread sheet to see it better...

Additional Information:
I will definitely do that. Thank you so much for providing the information!!

Additional Information:
I also have this problem with a yl620. Is there a solution?

Additional Information:
Is there a wiring diagram for the 110v units. My came with a 220 volt booklet.

Additional Information:
my unit also came with instructions for a 220 unit. I need a 110 wiring diagram.

Additional Information:
These instructions are lame at best, a friend of mine ordered one of these to install on a knife grinder that I built for him, and I proceeded to setup the unit, upon connecting it to the motor, it runs the motor, but hunt's at the lower speeds, and the setting I am looking for just isn't in the list, there's some settings in the 14's that don't say what there for, can anyone help?

Click the link to add information to this solution:
I received a VFD 110v yl600-2s-2k20 p 110v with 220v instructions, also the connectors on the VFD dose not match any wiring configuration you have.

Assumption 1: The "raw data" of 24 mrem on the TLD is the total dose received by the TLD during the 22 days that the TLD was deployed in your office. This means that (1) any TLD reader background signal has been properly subtracted, (2) the signal accumulating in the TLD during any transport or storage time between preparation (annealing) and deployment in your office has been properly subtracted and, (3) the signal accumulating in the TLD during any transport or storage time between removal from your office and processing (reading) has been properly subtracted.

With this assumption, the total dose rate in your office is (24 mrem)/(22 days), or 1.091 mrem per day. The reference background is given as 63 mrem per year which is (63 days)/(365.25 days per year) or 0.172 mrem per day. Thus the average net dose rate to the TLD during the 22 days was (1.091-0.172) = 0.919 mrem per day.

Assumption 2: The net dose rate of 0.919 mrem per day in your office is attributable to the accelerator or other regulated sources under the control of your institution.

Assumption 3: The office occupancy factor of 1/4 attributed in your question to NCRP Report 49 was misread from Table 4. The correct occupancy factor given in NCRP 49 for offices is 1.

Assumption 4: You take 20 business days per year off for vacation and holidays. You work in your office for the remaining 240 days per year.

Assumption 5: All of the accelerator shots occur while you are in your office.

Assumption 6: The average net dose rate of 0.919 mrem per day determined during the 22 days of measurement continues for a year.

Based on the data that you provided and my assumptions, your annual dose received in your office from the accelerator or other regulated sources at your institution is predicted to be (0.919 mrem per day) x (240 work days per year) = 220 mrem.

Tom Gesell, PhD

Click the link to add information to this solution:
HOW CAN I DETERMINE THE DOSE EQUIVALENT (MREM/HR, MREM/WK, MREM/YR) USING RAW DATA FROM A TLD (THERMOLUMINESCENT DOSIMETER) THAT WAS PLACED IN AN OFFICE FOR 22 DAYS?

Here are links to the sole pump and heat exchanger/fan. I am sending you amazon links sine I don't ahve listings of my pump and heat exchanger separately from my cooling system:
Pump: https://amzn.to/3R6zPbj
Fan/radiator (Heat exchanger): https://amzn.to/3UWOuqN

Click the link to add information to this solution:
I RECENTLY PURCHASED A REPALCEMENT 12V DC SWITCHING POWER SUPPLY, HOOKED IT UP BUR DID NOT THE PUMP AND RADIATOR. VERIFIED OUTPUT OF UNIT AT 12V. SO I'M ASSUMING ALSO NEED TO REPLACE CAN YOU SUPPLY ME LINK PURCHASE THEM?

The 12V power supply has 3 terminals for AC in: N, L and earth ground. The output of the 12V power supply has 2 DC + and - terminals. Cut the connectors off of the ends of the fan and pump wires. Strip the red and black wires of both units. The fan will connect to the 12V power supply red to the + and black to the -. The pump will connect in the same way, but the white is not connected.

If you have a pump that has a grey and black wire on the large connector, the grey is the 12VDC V+ wire and the black wire goes to the V-. The extra wire does not need to be connected.

Click the link to add information to this solution:
THE GANTRY MOUNTED SPINDLE WATER COOLER PUMP THAT I PURCHASED DOES NOT OPERATE NO MATTER HOW CONNECT THREE WIRES TO TWO WIRE POWER SUPPLY.

You can actually set a current limit in in the VFD using the programming process and the specifications in the manual that came with your VFD. You can expect the spindle at 220 Volts AC to draw (using the standard formula):

For Volts, I will use 230 as the range is generally 220 to 240.

Watts = Current * Volts

Can also be written as:

Current = Watts / Volts

Current = 2.2kW (2200 watts) / 230 volts

Current = 9.6 amps

Click the link to add information to this solution:
I have the 2.2 kW spindle and VFD for 110v, just wondering what amperage this draws, as my electricain buddy is telling me I need to put in a 20 amp breaker for this. I cant seem to find any amerpage draw on the INPUT label

Yes, this 2.2kW spindle can definitely be used with a 2.2kW 220V Huanyang VFD as long as the spindle you select is also rated 220V.

Click the link to add information to this solution:
[78] Is this compatible with a 2.2kW 220V Huanyang VFD? Thank you.