[ Log In ]
[ Register ]

Question #: 194

Question: WHAT COPYRIGHT?

Current Solution

Copyright is a form of protection grounded in the U.S. Constitution and granted by law for original works of authorship fixed in a tangible medium of expression. Copyright covers both published and unpublished works.

Respond:

Other Possible Solutions to this Question

  • WHAT DOES COPYRIGHT MEAN

    Copyright, a form of intellectual property law, protects original works of authorship including literary, dramatic, musical, and artistic works, such as poetry, novels, movies, songs, computer software, and architecture. Copyright does not protect facts, ideas, systems, or methods of operation, although it may protect the way these things are expressed

    Click the link to respond:
    WHAT DOES COPYRIGHT MEAN

  • WHAT DOES COPYRIGHT PROTECT?

    Copyright, a form of intellectual property law, protects original works of authorship including literary, dramatic, musical, and artistic works, such as poetry, novels, movies, songs, computer software, and architecture. Copyright does not protect facts, ideas, systems, or methods of operation, although it may protect the way these things are expressed

    Click the link to respond:
    WHAT DOES COPYRIGHT PROTECT?

  • I’VE HEARD ABOUT A “POOR MAN’S COPYRIGHT.” WHAT IT?

    The practice of sending a copy of your own work to yourself is sometimes called a “poor man’s copyright.” There is no provision in the copyright law regarding any such type of protection, and it is not a substitute for registration.

    Click the link to respond:
    I’VE HEARD ABOUT A “POOR MAN’S COPYRIGHT.” WHAT IT?

  • MY COPYRIGHT GOOD IN OTHER COUNTRIES?

    The United States has copyright relations with most countries throughout the world, and as a result of these agreements, we honor each other's citizens' copyrights. However, the United States does not have such copyright relationships with every country.

    Click the link to respond:
    MY COPYRIGHT GOOD IN OTHER COUNTRIES?

  • HOW A COPYRIGHT DIFFERENT FROM PATENT OR TRADEMARK?

    Copyright protects original works of authorship, while a patent protects inventions or discoveries. Ideas and discoveries are not protected by the copyright law, although the way in which they are expressed may be. A trademark protects words, phrases, symbols, or designs identifying the source of the goods or services of one party and distinguishing them from those of others.

    Click the link to respond:
    HOW A COPYRIGHT DIFFERENT FROM PATENT OR TRADEMARK?

  • WHY SHOULD I REGISTER MY WORK IF COPYRIGHT PROTECTION AUTOMATIC?

    Registration is recommended for a number of reasons. Many choose to register their works because they wish to have the facts of their copyright on the public record and have a certificate of registration. Registered works may be eligible for statutory damages and attorney's fees in successful litigation. Finally, if registration occurs within 5 years of publication, it is considered prima facie evidence in a court of law.

    Click the link to respond:
    WHY SHOULD I REGISTER MY WORK IF COPYRIGHT PROTECTION AUTOMATIC?

  • WHAT THE BRAIN?

    The ALL POWERFULL!!!

    Click the link to respond:
    WHAT THE BRAIN?

  • WHAT'S THE BRAIN

    The ALL POWERFULL!!!

    Click the link to respond:
    WHAT'S THE BRAIN

  • what is a #8 nut

    A #8 nut is a nut that is used as a pair with a #8 screw to mechanically fasten parts together that contain holes just larger than the #8 screw size.

    The #1 to #12 designations are not the easiest to understand as they don't specifically inform of their size. The thread diameter of the #8 screw is .16" (the major diameter measured from the crest of the thread, not the diameter measured from the root of the thread). The minor diameter measured from the root of the thread would most closely match the inside diameter of the nut.

    Additional Information:

    Click the link to respond:
    what is a #8 nut

  • What is backlash?

    Backlash is a term used to describe the looseness in a mechanical system. Backlash can occur anywhere in a machine, but is generally emphasized at the nut and lead screw connection. If the nut threading doesn't perfectly match the lead screw thread, there will be a wiggle, or play between both the screw and nut. This is backlash. Backlash can also be located in the motor bearings, coupling (connecting a shaft or lead screw to the motor shaft), collars not being hard against the bearing, or temperature change that causes various materials to expand or contract, making the connections loosened.

    Click the link to respond:
    What is backlash?

  • WHAT IS KERF?

    Kerf is the cutting width from the lasers beam. This will change in width depending on your power level, higher power will increase your kerf width. This is usually around 0.15mm for a 40w laser using a 2" lens

    Click the link to respond:
    WHAT IS KERF?

  • What is tDCS?

    Transcranial direct current stimulation

    Click the link to respond:
    What is tDCS?

  • WHAT IS "BACKLASH"

    Backlash is a term used to describe the looseness in a mechanical system. Backlash can occur anywhere in a machine, but is generally emphasized at the nut and lead screw connection. If the nut threading doesn't perfectly match the lead screw thread, there will be a wiggle, or play between both the screw and nut. This is backlash. Backlash can also be located in the motor bearings, coupling (connecting a shaft or lead screw to the motor shaft), collars not being hard against the bearing, or temperature change that causes various materials to expand or contract, making the connections loosened.

    Click the link to respond:
    WHAT IS "BACKLASH"

  • what is your name?

    My name is "The Brain!!"

    Click the link to respond:
    what is your name?

  • WHAT IS PI?

    Approximately 3.1415927

    Click the link to respond:
    WHAT IS PI?

  • What is a #8 screw?

    A #8 nut is a nut that is used as a pair with a #8 screw to mechanically fasten parts together that contain holes just larger than the #8 screw size.

    The #1 to #12 designations are not the easiest to understand as they don't specifically inform of their size. The thread diameter of the #8 screw is .16" (the major diameter measured from the crest of the thread, not the diameter measured from the root of the thread). The minor diameter measured from the root of the thread would most closely match the inside diameter of the nut.

    Additional Information:

    Click the link to respond:
    What is a #8 screw?

  • WHAT ELSE?

    PC with parallel port and USB port
    20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
    18awg stranded wires for power supply to drivers
    24awg stranded wires for breakout board to drivers
    (location and spacing of components varies from one person to another, so we do not provide cables/wires)
    - General purpose extension cord (cut the female end off) to provide power to power supply
    - USB cable to power breakout board
    - Parallel cable to communicate to breakout board
    - Router
    - (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
    - (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
    - End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
    - CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
    - CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx
    - If the machine does not have the table included, then a table will need to be built. The rails, chain and chain mounts are included that are used on this table.

    Click the link to respond:
    WHAT ELSE?

  • WHAT IS FOCAL LENGTH

    The lens is 20mm wide and a 50.6mm focal length (the one included). This lens will stand up to at least 30PSI air assist.

    The mirrors are 25mm wide mirrors.

    Focal length is the distance from the lens to the material for the laser converge into the best focal point. If a lens is listed as 2". You measure 2" from the lens to the material, this will be the tightest point the laser can go before it starts to re-expand again losing focus.

    Click the link to respond:
    WHAT IS FOCAL LENGTH

  • WHAT IS CNC MACHINE?

    A CNC machine is basically a computer controlled high precision tool that is able to make intricate movements accurately and repeatedly. Our machines use common routers and spindles to mill, cut, engrave and shape materials in automated machining operations.

    Click the link to respond:
    WHAT IS CNC MACHINE?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.