I am getting the solution from the developer. I will put the solution on this page when they provide the solution.

Thanks, Patrick

Additional Information:
Here is the information I received from the developer:

These are available on Windows 10. PoBlocks does not require .NET, but the communication library that the PoKeys app uses does need it.

Go to the control panel -> Search for "Turn Windows features on or off" -> Make sure the checkbox on the line ".NET Framework 3.5 (includes .NET 2.0 and 3.0)" is checked (or filled in).

Click the link to add information to this solution:
[596] I am trying to install the Pokeys configuration and Poblocks on a windows 10 computer. An error message says Ineed net frameworks 2.5 qnd 3.0.Both appear to be unavalable.Solution?

I can send you a new license. All you need to do is email me at customerservice@buildyourcnc.com and state the name the license is under and I will send you another license.

Click the link to add information to this solution:
I bought and downloaded about 2 years ago, recently my PC that I use for my CNC crashed and now have to reinstall Mach3 but the license download has since expired. What I need to do to activate the software?

The bluchick CNC router is a perfect small format CNC that can handle most jobs. Please check here to see the latest information on this CNC router. blueChick CNC Machine. The machine can be purchased assembled. Al you will need is a computer and spindle.

Click the link to add information to this solution:
I'm looking for a complete CNC router, out the box ready to use system. Computer and software. What do you suggest? I need a working area of 12"x24"

The greenLean machine comes with the entire structure and features a 4'x8' cutting area. You will still need some hookup wire to connect the electronics and silicone tubing for the water to and from the spindle.

greenLean Machine: https://buildyourcnc.com/item/cnc-machine-greenLean-v1

Thanks for answering my last question. So I have two follow-up questions from the response. The green leaf stands vertical is it designed for the material to be cut without falling free once it is cut through? And second question: you metioned water running to the spindle is this a cooling system for the spindle?

You would use holding tabs to keep the parts from falling out of the cut areas. Holding tabs are generated as part of the CAM file. Yes, this is the way the spindle is cooled. This is far superior to air cooling. Air cooling will blow the chips all over the shop.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I am loking for a kit that can cut 4x8 material and would be ready to cut when assembled. plus what computer and software are needed to be ready to cut?

What is the actual error that you are seeing in Mach3 and what CAM program are you using? Did you try installing a later version of Mach3 if your's is an earlier version? What post-processing setting are you using in your CAM program?

Click the link to add information to this solution:
I am getting that radus error in Mach3 and changing my IJ setting is not working. Any suggestions?

You can call us, send an email, or pose the specific question on this customer service live that pertains to the issue that you are having.

Click the link to add information to this solution:
Im having software setup problems with my backtooth (mach3) and i seem not to find a solution in the forum. what can i do?

You will need to build the table unit for your machine. There are instructions on how to do this at the bottom of the product page here, https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4
There is no estimate on how much this will cost though, since there are too many variables involved to do this.

- PC with parallel port and USB port
- 20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
- 18awg stranded wires for power supply to drivers
- 24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx

This answer is applicable to most of our machines with the exception of the greenLean and the blueChick since those machines are equipped with a table structure.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Can I purchase a computer off Amazon (I have a machine I want to use) and still use the USB interface to drive it with LinuxCNC?

The plug and play system does have enough memory for additional software. The redLeaf comes standard with a 1TB hard drive.

Click the link to add information to this solution:
DOES THE PLUG AND PLAY ELECTRONICS COMPUTER FOR 3 AXIS CNC MACHINE HAVE ENOUGH MEMORY RAM ADDITIONAL SOFTWARE (BOBCAD-CAM, BOBART, MACH3) TO BE ADDED FUNCTION WELL?

You can find instructions for the Mach3 USB here:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

You will probably need to use the Mach3 USB board with Mach3. We have not tested the Mach3 usb card with Mach4.

Click the link to add information to this solution:
Whereb can I find directions on how to install the Mach3 USB board with Mach 4 software? I do not have a parallell port.

Yes, here is the URL for the parallel breakout board that we sell:

https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
can I purchase just the parallel controller board? I purchased the usb option 4 axis combo and would like to also try the system with my parallel port computer. Any help with this will be greatly appreciated; my goal is to implement mach4.

I have not come across this problem, but there may be USB, or firmware issues that you are experiencing. I would recommend going on the polabs website and using their support center (https://support.poscope.com/)and posing that question to them. Also, have you tried the ethernet port as an alternative to see if that helps?

Here is the response from an LLM:

Check USB Cable and Port: Start with the basics. Sometimes this error is due to a poor USB connection. Ensure you're using a high-quality, shielded USB cable and that it's plugged into a USB port directly on your computer, not through a hub. If possible, try a different USB port or a different cable to rule out any issues there.

Update Firmware and Software: Ensure that both your PoKeys57CNC firmware and the Mach4 software are up to date. Firmware updates for your PoKeys board might include optimizations or fixes that address connectivity issues.

USB Polling Rate: This error can also arise from the USB polling rate setting in the PoKeys configuration software. It might be set too high for your system's ability to handle it. Try lowering the polling rate and see if that resolves the error.

Computer Performance: Check your computer’s performance. If it’s running several heavy applications simultaneously, it might not be able to process signals from the PoKeys board fast enough. Try closing unnecessary applications or consider using a dedicated machine if your current setup is too taxed.

Mach 4 and PoKeys Plugin Configuration: Dive into the Mach 4 plugin configuration for PoKeys. Ensure that all settings are correctly configured as per the manual. Incorrect settings might lead to communication bottlenecks.

Connection Quality and Interference: Consider any potential interference sources near your CNC setup or computer. Electromagnetic interference from large motors, other electronics, or long cable runs can affect communication quality. Try rearranging your setup to minimize interference.

Consult Documentation and Support: If the issue persists, consult the detailed documentation provided by PoKeys or reach out to their customer support. They can offer more specific advice based on the latest product updates or known issues.

Click the link to add information to this solution:
I HAVE FOLLOWED YOUR YOUTUBE VIDEO ON SETTING UP THE POKEYS 57CNC BOARD BUT WHEN OPEN MACH 4 GET A ERROR MESSAGE CONNECTION IS TO SLOW

I have not come across this problem, but there may be USB, or firmware issues that you are experiencing. I would recommend going on the polabs website and using their support center (https://support.poscope.com/)and posing that question to them. Also, have you tried the ethernet port as an alternative to see if that helps?

Here is the response from an LLM:

Check USB Cable and Port: Start with the basics. Sometimes this error is due to a poor USB connection. Ensure you're using a high-quality, shielded USB cable and that it's plugged into a USB port directly on your computer, not through a hub. If possible, try a different USB port or a different cable to rule out any issues there.

Update Firmware and Software: Ensure that both your PoKeys57CNC firmware and the Mach4 software are up to date. Firmware updates for your PoKeys board might include optimizations or fixes that address connectivity issues.

USB Polling Rate: This error can also arise from the USB polling rate setting in the PoKeys configuration software. It might be set too high for your system's ability to handle it. Try lowering the polling rate and see if that resolves the error.

Computer Performance: Check your computer’s performance. If it’s running several heavy applications simultaneously, it might not be able to process signals from the PoKeys board fast enough. Try closing unnecessary applications or consider using a dedicated machine if your current setup is too taxed.

Mach 4 and PoKeys Plugin Configuration: Dive into the Mach 4 plugin configuration for PoKeys. Ensure that all settings are correctly configured as per the manual. Incorrect settings might lead to communication bottlenecks.

Connection Quality and Interference: Consider any potential interference sources near your CNC setup or computer. Electromagnetic interference from large motors, other electronics, or long cable runs can affect communication quality. Try rearranging your setup to minimize interference.

Consult Documentation and Support: If the issue persists, consult the detailed documentation provided by PoKeys or reach out to their customer support. They can offer more specific advice based on the latest product updates or known issues.

Click the link to add information to this solution:
[596] I have followed your YouTube video on setting up the pokeys 57cnc board but when I open Mach 4 I get a error message the the connection is to slow

Depending on the specific software you have bought, it might require you to download the main software via their main website. While we will send you the license via email, to unlock the complete software capabilities.

Click the link to add information to this solution:
I ordered software for download and it hasn't arrived. It has been several hours. Please advise on the status.

You can find the latest version here http://www.planet-cnc.com/index.php?page=download

Additional Information:

Click the link to add information to this solution:
Where can I download the USBCNC software? The https://buildyourcnc.com/files/CNCUSB_20130308.zip link is dead.

You can see the component list on the hardware and plans machine (scratch build machine) since it is the same machine in the book:

https://www.buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:

Click the link to add information to this solution:
Sorry but did not get copy of address for downloading MDF Plans and Cut List PDF fileHow do I download the MDF Plans and cut List PDF file please

The best wiring diagram that can be used for the redLeaf and redSprout CNC computer system would be found on instruction #1 (datasheet for the breakout board) on this page: https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
Hi I live in South Africa and want to know if i can buy a wiring and component diagram for the readleaf plug and play computer system?

The best wiring diagram that can be used for the redLeaf and redSprout CNC computer system would be found on instruction #1 (datasheet for the breakout board) on this page: https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
Hi I live in South Africa and want to know if i can buy a wiring and component diagram for the readleaf plug and play computer system?

Here is the new link to the Planet CNC software download page: http://planet-cnc.com/software/

You can try the software as a demo however you will have limited g-code lines you can run. I believe it was around 500, so you can create small items with the demo.
To fully unlock the Planet-CNC software you will need to purchase the license.

Click the link to add information to this solution:
I purchased the USB BOB and the link for the Planet-cnc software is broke. Will I need to purchase a license for the software as well?

Is this CNC related. If so, what controller are you using?

Additional Information:
I'm using the Mach 3/USB CNC interface board, with the Mach 3 software.

Additional Information:
Does the LED on the controller light up, or blink?

Additional Information:
I believe I've corrected the issue. I found that their are 2 spring like tabs on the female USB port. And take a sharp point like on a compass and gentle raise those tabs a bit. This tighten up the connection, and I never received an error from losing connection.

Click the link to add information to this solution:
It appears I have a connection issue with the USB port on my computer with the USB cord. I purchased a new cord but has the same issue. Is there anything I can do to correct this issue?