parts for my homemade plasmacutter table

Question #: 10107

Question: parts for my homemade plasmacutter table

Current Solution

The plasma nozzle must be close to the cutting area and you will need some way to keep the nozzle at the right level with some type of device. The spray is downward, so you will need a contained area with a sheet of water at the bottom to extinguish he spray. You should have no problem using our machines for this application since you would need to product the table bed.

Respond:

Other Possible Solutions to this Question

WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?
Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.

Link:
https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X
Click the link to add information to this solution:
WHAT ARE THE DIMENSIONS FOR GREENBULL TABLE?
PARTS LIST FOR THE BOOK MACHINE
The parts list is located on this page: http://buildyourcnc.com/cnckitintro.aspx at the bottom of the description.

Additional Information:

Additional Information:
Click the link to add information to this solution:
PARTS LIST FOR THE BOOK MACHINE
MY PARTS ARE COMING OUT THE WRONG SIZE
In Mach3, go to the Settings Tab, and select "Set Steps Per Unit". It will ask you how far to move the machine. Before you do this, make a mark on the table exactly where the end mill is resting. You can do this by lowering the end mill until it touches the material, then spinning it by hand to cut a small dimple in the material. Then, raise the end mill to clear the material, and assign a distance to move the machine. Once the machine moves and stops, measure the exact distance that it actually traveled with a tape measure, and enter this value into the dialog box that asks how far it moved. Mach3 will automatically adjust your steps per unit for that axis to be more accurate. Do this for all axes often to ensure you are cutting accurately. The longer distances you use calibrate, and the more precise you are with your measurements, the better.

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
idwmHJym

Additional Information:
-1 OR 2+78-78-1=0+0+0+1 --

Additional Information:
-1 OR 2+135-135-1=0+0+0+1

Additional Information:
-1' OR 2+886-886-1=0+0+0+1 --

Additional Information:
-1' OR 2+357-357-1=0+0+0+1 or 'xkLzGxAb'='

Additional Information:
-1" OR 2+279-279-1=0+0+0+1 --

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@5fZce

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
MY PARTS ARE COMING OUT THE WRONG SIZE
WHICH CHEMICAL N ON THE PERIODIC TABLE.
Nitrogen is the chemical element represented by the symbol N.
Click the link to add information to this solution:
WHICH CHEMICAL N ON THE PERIODIC TABLE.
HOW LONG WOULD IT TAKE FOR MY TO BUILD A MACHINE?
The length of time it will take to build a CNC machine kit is not an easy answer. There may be a wide array of circumstances that limit a persons abilities to build the cnc machine kit in an efficient timeframe; however, if you have moderate dexterity and moderately mechanically inclined, you should have no problem building one of our machines within one weekend if the project has very little downtime.

Additional Information:
Click the link to add information to this solution:
HOW LONG WOULD IT TAKE FOR MY TO BUILD A MACHINE?
WHAT DO I SET FOR MY STEPS PER?
blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in

Scratch-Build / Book-Build Kit:

X-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 1600 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Additional Information:

Additional Information:
Scratch built/book CNC with NEMA 34 motors and CW8060 microstep driver

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
L8NiICEm

Additional Information:
-1 OR 2+427-427-1=0+0+0+1 --

Additional Information:
-1 OR 2+145-145-1=0+0+0+1

Additional Information:
-1' OR 2+101-101-1=0+0+0+1 --

Additional Information:
-1' OR 2+739-739-1=0+0+0+1 or 'kXOzulhF'='

Additional Information:
-1" OR 2+194-194-1=0+0+0+1 --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
TO93cbNY

Additional Information:
-1 OR 2+824-824-1=0+0+0+1 --

Additional Information:
-1 OR 2+681-681-1=0+0+0+1

Additional Information:
-1' OR 2+805-805-1=0+0+0+1 --

Additional Information:
-1' OR 2+93-93-1=0+0+0+1 or 'MpFdFb3O'='

Additional Information:
-1" OR 2+275-275-1=0+0+0+1 --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
-1); waitfor delay '0:0:7' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(9),0))XOR"Z

Additional Information:
2k2XS4cL'; waitfor delay '0:0:15' --

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:
g7NWXuig'); waitfor delay '0:0:15' --

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
XoN629J2')); waitfor delay '0:0:15' --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
-5 OR 247=(SELECT 247 FROM PG_SLEEP(15))--

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
-5) OR 122=(SELECT 122 FROM PG_SLEEP(15))--

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
-1)) OR 455=(SELECT 455 FROM PG_SLEEP(15))--

Additional Information:
o1WPxXu4'; waitfor delay '0:0:15' --

Additional Information:
X3pq07N4' OR 218=(SELECT 218 FROM PG_SLEEP(15))--

Additional Information:
i2jhQp7d'); waitfor delay '0:0:15' --

Additional Information:
xMv7x4te') OR 71=(SELECT 71 FROM PG_SLEEP(15))--

Additional Information:
IbKvmZZx')); waitfor delay '0:0:15' --

Additional Information:
YkhmkP9W')) OR 826=(SELECT 826 FROM PG_SLEEP(15))--

Additional Information:
-5 OR 539=(SELECT 539 FROM PG_SLEEP(15))--

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:
-5) OR 160=(SELECT 160 FROM PG_SLEEP(15))--

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@EQr47

Additional Information:
-1)) OR 220=(SELECT 220 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 266=(SELECT 266 FROM PG_SLEEP(9))--

Additional Information:

Additional Information:
-1)) OR 107=(SELECT 107 FROM PG_SLEEP(0))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
vL4vUHTG' OR 262=(SELECT 262 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
gGLXRSqE' OR 938=(SELECT 938 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
WT10Ii3x' OR 598=(SELECT 598 FROM PG_SLEEP(9))--

Additional Information:

Additional Information:
QUuBKFso') OR 152=(SELECT 152 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
nI56G5Pp')) OR 493=(SELECT 493 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@nxzWO

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
vJlQYk5k

Additional Information:
-1 OR 2+406-406-1=0+0+0+1 --

Additional Information:
-1 OR 2+236-236-1=0+0+0+1

Additional Information:
-1' OR 2+914-914-1=0+0+0+1 --

Additional Information:
-1' OR 2+282-282-1=0+0+0+1 or '9J7jHjSj'='

Additional Information:
-1" OR 2+210-210-1=0+0+0+1 --

Additional Information:

Additional Information:

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(14),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
0"XOR(if(now()=sysdate(),sleep(0),0))XOR"Z

Additional Information:

Additional Information:

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:

Additional Information:

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:

Additional Information:
RO4xZyuD'; waitfor delay '0:0:15' --

Additional Information:

Additional Information:
n2HpQRHN'); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
hd4dcDEY')); waitfor delay '0:0:15' --

Additional Information:

Additional Information:
-5 OR 237=(SELECT 237 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
-5) OR 65=(SELECT 65 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 486=(SELECT 486 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
-1)) OR 399=(SELECT 399 FROM PG_SLEEP(14))--

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
x4ZvP74B' OR 337=(SELECT 337 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
0VRZpjOv') OR 601=(SELECT 601 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
DrCdekI1')) OR 16=(SELECT 16 FROM PG_SLEEP(15))--

Additional Information:

Additional Information:
MQqu0z64')) OR 87=(SELECT 87 FROM PG_SLEEP(7))--

Additional Information:

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1��%2527%2522

Additional Information:
@@HJ5oY

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT DO I SET FOR MY STEPS PER?
N ON THE PERIODIC TABLE.
Nitrogen is the chemical element represented by the symbol N.
Click the link to add information to this solution:
N ON THE PERIODIC TABLE.
CAN YOUR PRODUCTS OF MACHINES BE USED TO CREATE PLASMA TABLE?
The plasma nozzle must be close to the cutting area and you will need some way to keep the nozzle at the right level with some type of device. The spray is downward, so you will need a contained area with a sheet of water at the bottom to extinguish he spray. You should have no problem using our machines for this application since you would need to product the table bed.
Click the link to add information to this solution:
CAN YOUR PRODUCTS OF MACHINES BE USED TO CREATE PLASMA TABLE?
GREENBULL TABLE
Actual table dimension: 4'x8' is 56.078"x 121.50" (the overhang in the illustrations should be 3/4" thick)
To determine the frame dimensions, first consider using the frame height shown of almost 3' (2.86'). The width of the frame should be 4" narrower than the dimension from rail edge to rail edge (6X rail to rail is 80.078"). This will provide a 2" overhang on both sides (4X frame width should be 56.078").
The length of the frame should be 4" shorter than the desired length of the rails to provide a 2" overhang on both ends. The travel length will be 20" shorter than the rail length due to the space occupied by the gantry sides.
Two long pieces of 3/4" material will need to be placed on top of the frame with the 2" overhang on the sides and the end. These long strips of material will receive the rails and the chain mounts on the ends.

Link:
https://www.buildyourcnc.com/Item/cnc-machine-greenBull-v4-4X
Click the link to add information to this solution:
GREENBULL TABLE
DOES YOUR COMBO #1 WITH PLANS AND THE DVD COME COMPLETE PARTS LIST?
The parts list is located on this page: http://buildyourcnc.com/cnckitintro.aspx at the bottom of the description.

Additional Information:

Additional Information:
Click the link to add information to this solution:
DOES YOUR COMBO #1 WITH PLANS AND THE DVD COME COMPLETE PARTS LIST?
DON'T WANT TO USE MY OWN MOTORS FOR THE REDLEAF CNC COMPUTER SYSTEM.
That shouldn't be a problem. I will need the current rating for the motors. We can subtract the price of the motors. and you can add you own. If you want us to solder the cable to the round connectors and them motor, you would need to send the motors to us.

Let me know and I can send a paypal invoice for the redLeaf without motors.
Click the link to add information to this solution:
DON'T WANT TO USE MY OWN MOTORS FOR THE REDLEAF CNC COMPUTER SYSTEM.
WHAT THE TECHNICAL SUPPORT FOR STAMPS.COM?
The stamps.com technical support is developersupport@stamps.com
Click the link to add information to this solution:
WHAT THE TECHNICAL SUPPORT FOR STAMPS.COM?
WHAT COMES IN THE BOX FOR BASIC GREENLEAN?
The base greenLean CNC Machine Kit package includes:
- Structure (all of the structural parts that make up the gantry and rib system). The structure does not include the spoilboard.
- Hardware (All of the fasteners, like screws, nuts, cross dowels, washers, etc.)
- Mechanical components (bearings, rails, sprockets, shafts, etc.)
- Electronics (3 NEMA 651 Motors, 3 6.0 Amp drivers power supply, interface card to connect the drivers to a computer, and 91 feet of motor cable. Hookup wire to connect the electronics is not included.)
- 2.2kw Spindle and VFD

Here is a link to the greenLean CNC Macnine page: https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1
Click the link to add information to this solution:
WHAT COMES IN THE BOX FOR BASIC GREENLEAN?
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT ARE THE CABLE LENGTHS FOR BLACKTOE
HOW MUCH MOTOR CABLE FOR THE BLACKFOOT?
The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
HOW MUCH MOTOR CABLE FOR THE BLACKFOOT?
LENGTH OF THE BRUSH STRIP FOR SPINDLE 2.2KW
The total length of the brush strip for a 2.2kW spindle would be 17 1/4" inches.

Additional Information:
20
Click the link to add information to this solution:
LENGTH OF THE BRUSH STRIP FOR SPINDLE 2.2KW
WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE
The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE
MOTOR 4 CONDUCTOR CABLES FOR BLACKFOOT
The blackfoot requires a total of 50 feet of cable.

The X axis needs 15 feet
The Y axis needs 17 feet
and the Z-axis needs 18 feet

These are 20 gauge 4 conductor cable.

Additional Information:
Click the link to add information to this solution:
MOTOR 4 CONDUCTOR CABLES FOR BLACKFOOT