It will be very soon. We are developing a mount for a 40W laser tube for the blackToe, blackFoot and greenBull. This will be available within 2 months.

Click the link to add information to this solution:
I would like to add laser option to my cnc mill. Is this possible?

The dimensions for the #40 drive sprockets will be 1.835" radius tooth to tooth , .575" from teeth to teeth, 0.600" / 3/5 ID, 1.249" OD.
Now the idler sprocket dimensions (same format):
Radius ttt: 2.963"
Fttt: 0.535"
ID: 0.600" / 3/5
OD: 0.825"

Click the link to add information to this solution:
I am designing/building a cnc plasma cutter and I would like some info on some of your parts. Would it be possible to get dimension and/or drawings (or models) of the #40 drive and idle sprockets?

You can cut at varying depths with the 40w laser cutting and engraving machine. Each layer of engraving with the laser will leave behind a black charred film that will reduce the effectiveness of the engraving for deeper layers; therefore, a very strong air assist will be needed to blow this film off of the surface of the material.

CNC machines are more successful and efficient at carving and should be considered.

Click the link to add information to this solution:
I wonder if it is possible to do 3d engraving with the 40w laser kit? different depths is the same piece of wood.

We have the image at that size to encourage the purchase of the kit from us. This helps to keep buildyourcnc alive and allows us to fund development of other awesome low cost machines.

Click the link to add information to this solution:
could you make available a larger size picture of the exploded view of the BlackTooth laser cutter? I would like to use for reference when building my laser cutter, but it is too small to be really useful.

Yes, You can order, only you need supply the information of the machine.

Click the link to add information to this solution:
Is it possible to order just the gantry assembly for the black toe machine?

We do offer all of the parts; but it is best to purchase them a la carte. You will probably not want the hardware since this would not conform to a design in metal.

All of the mechanical parts are available here:
https://buildyourcnc.com/CNCMachineMechanicalParts.aspx

All of the electronics you would need is available here:
https://buildyourcnc.com/electronicscombo.aspx

All of the laser components are available here:
https://buildyourcnc.com/LaserComponents.aspx

And the spindles and VFDs are available here:
https://buildyourcnc.com/SpindlesAndAccessories.aspx

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Is it possible to order the mechanics, motors and electronics, in other words, order the kit without the wood? Reason being is I have aluminum and steel to make a machine out of.

If you are wanting to purchase all of the parts for a machine excluding the structural parts, you will need to order the parts a la carte.

Electronics packages can be found here:
https://buildyourcnc.com/category/elcombo

Mechanical components can be found here:
https://buildyourcnc.com/CNCMachineMechanicalParts.aspx

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Is it possible to order the mechanics, motors and electronics, in other words, order the kit without the wood? Reason being is I have aluminum and steel to make a machine out of.

Increasing the size on your Z-axis is possible by making the over z axis longer (rails, wood structure). Remember the location of your router/spindle and over all integrity of the z-axis structure.
Now another way of getting a longer reach is making a adjustable height table, so that you can raise or lower the material section(2' x 4') to add taller material or get a deeper cut.

Click the link to add information to this solution:
Is it possible to increase the Z axis on the Blacktoe 2x4? My ideal would be to have 8" of travel.

We do offer all of the parts; but it is best to purchase them a la carte. You will probably not want the hardware since this would not conform to a design in metal.

All of the mechanical parts are available here:
https://buildyourcnc.com/CNCMachineMechanicalParts.aspx

All of the electronics you would need is available here:
https://buildyourcnc.com/electronicscombo.aspx

All of the laser components are available here:
https://buildyourcnc.com/LaserComponents.aspx

And the spindles and VFDs are available here:
https://buildyourcnc.com/SpindlesAndAccessories.aspx

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Hello, I'm interested in GreenBull 5'x10' CNC machine kit with 40W laser head. Is it possible to receive an offer for this size cnc machine kit with all the mechanics, electronics and laser parts, but without all the wooden parts? We would like to build this kind of laser cutter machine with metal frame and parts. And is it possible also to get 3D drawing for machine? Waiting for your answer.

Buying both the blackToe and the 4th axis is an available option, but take into account the clearance available on the gantry. The best option for the table will be a adjustable mid-section table. That will be able to lower when the 4th axis is going to be used. Or have a elongated table that has a portion for the basic CNC, then a section for the 4th axis.

Click the link to add information to this solution:
Would it be possible to buy the blackToe, and the 4th Axis, then build your own Tslot table to attach both items to? Would a setup like this be possible?

Attaching two motors in parallel is possible, but you will need another motor and driver for the opposite side. Each motor must have its own driver to work accordingly and fluently. The two can be wired together, to the same pins on your breakout board and set the dip switches on the driver to match the ones on your x-axis(ex). But remember to view the orientation of the motor and which way it spins, since it is on the opposite side it will have to be orientated correctly to move in sync with the other motor.

Click the link to add information to this solution:
I just finished building my first CNC with the electronics I purchased from you and I am already thinking about improving it. I would like to build a 2 motor X axis solution. Is it possible to attach 2 parallel motors and drivers to the BlueBrew Breakout Board? If so, how?

If you were logged in when you made the purchase, you can click the "My Account" link at the top of any page on this website and see all of your orders, order line items (with direct links to these items), and shipment information.

Here is a link to the "My Account" page for your convenience:
https://www.buildyourcnc.com/CustomerInfo.aspx

I did not see your username on your internal customer record, so I added this username and you should be able to see the information in the "My Account" page.

Additional Information:
I just tested your accounts page and the cable carrier links are in there. Thanks and please let me know if you need further assistance.

Click the link to add information to this solution:
I have purchased cable carrier chain and would like to know if you could send me a copy of that order as I need to purchase extra lengths of the links I bought. Thanks

If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.

Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?

You can control our 40W laser power supply (which controls the laser tube) with an Arduino, if that is your intention. The trigger for turning the laser on and off uses a 5V level. To control intensity, you can use the Arduino PWM output. If you want the Arduino to move the machine as well (providing pulse trains to each of the stepper motor drivers) then you will need to make sure you consider the processing speed of the Arduino so you will be able to run the stepper motors at the speed you need for the laser engraving/cutting.

Our laser controller do all of these functions. Here is a link to our laser control system:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System



Additional Information:
Thank you! I am building a 3 axis cnc/ engraver and I think this would be a good option as well as the router head and the 3d printing head. How heavy is the tube? I may mount it directly onto one of the axis of the machine to eliminate the need to line up all three axis, similar to what you have with your xl engraver.

Additional Information:
The tube isn't that heavy, but when filled with water, it can get up to a few pounds. The key is to use the axis moving the nozzle for engraving as this requires fast back and forth motion. The cutting is generally dependent on the axes moving from vector to vector at a relatively slow motion, so this is not a problem.

Click the link to add information to this solution:
I would like to build a low cost laser engraver/ cutter, can your 40w laser power supply be controlled with an arduino or is it only controlled by the controller sold here?

The files and hardware option for our machines has been removed from the site due to the following reasons:
Difficulty for the end use of the files and the challenges (and time/money) on our side to assist in using these files.
The abuse of these files over the internet.
Ultimately may reduce the sales of machines keeping us in business.
Sadly, this is what has come out of our company attempting to be open; however, the machines sold on this site is still far lower in price than the competition for the quality that we provide as we have a great desire to engender the cottage industry to fulfill their need for low end manufacturing. My sincere apologies if this causes any inconvenience.

Additional Information:
NO, is not possible, I can help with the shipping cost

Additional Information:

Click the link to add information to this solution:
I was wondering if it is at possible to get a autocadd drawing of the pieces that need to be built for your cnc hardware kit

In regards to adding more items to a previous purchase, please email or call: customerservice@buildyourcnc.com/281-815-7701, so we can stop the previous shipment and add the items you wish to add to the previous order.

Also depending on size and weight of the new item, a additional coverage price for shipping might be required.

Click the link to add information to this solution:
I just submitted an order but would like to add an item to it before it ships

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

There are many possible options for making a lathe. Typically, a lathe is run by a spindle at the head stock (which you can find here https://buildyourcnc.com/SpindlesAndAccessories.aspx) which will rotate the object rather than a fourth axis, however you will need to create or buy the clamp mechanism of a regular lathe to hold the object in place. You will be able to control the on/off either manually or via software, but the speed (RPM) will have to be controlled manually.
You can create a more indexed alternative to a lathe by using our rotary axis at the head stock (found here https://buildyourcnc.com/item/axes-4th). either way, the tail stock center can be found here https://buildyourcnc.com/item/axes-4th. This will give you full control of the turning via software.

You will want to use linear rails and their associated bearing blocks (found here https://buildyourcnc.com/item/mechanical-rails-HIWIN-Linear-20mm and herehttps://buildyourcnc.com/item/mechanical-rails-linear-guide-rails-20mm) to run along the length of the item being turned and you will need linear rails to be run perpendicular (towards and away) to the object being turned that would hold either the blade (for a traditional lathe) or a spindle (for the indexed version containing the rotary axis).

Where you have linear rail, you will also need lead screw (found here https://buildyourcnc.com/item/mechanical-leadscrews-lead-screw-!5-5-starts-10-tpi) to transmit motion using motors (and drivers) of your choice also with various options (found here https://buildyourcnc.com/category/nema and here https://buildyourcnc.com/category/driver). You will need 2 - Drivers (either 3.0A or 6.0A, the 6.0A driver will be for our larger motors hence you will have more torque available) and 2 - Motor's (either our Nema 24's or Nema 34's, the Nema 24 will work with our 3.0A driver while the Nema 34 will work the 6.0A)
To control these motors, you will need a parallel breakout board and Mach 3 software to control the two axes (or three with the rotary axis) found here https://buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay and https://buildyourcnc.com/item/control-SOFTWARE-mach3.

You will need couplings to couple the lead screws to the motor shafts (found here https://buildyourcnc.com/couplings.aspx). All of the miscellaneous hardware you need can also be found here https://buildyourcnc.com/Hardware.aspx.

Click the link to add information to this solution:
CNC Wood Lathe project - Would like to have the guts to a 2 axis DIY lathe. Can you let me know of a possible one stop shop solution? Would like it to be at least 40" on the X axis.

If you purchase the greenLean, you will get everything you need except a router, computer to operate the machine, and software to control the machine. You state that you have a computer. You can use this computer, but you will need to determine if it has a parallel port, or if you are going to need the USB controller option. As for the software, there are too many different options for you to choose from. We would not be able to tell you which to get, and how much it will cost you. This is a matter of preference. I can tell you, however, that you will need 3 types of software to complete a CNC project. You will need CAD software to design your design, CAM software to add tool paths and convert the design to g-code, and then control software to take the g-code and operate the machine.

Additional Information:
20

Click the link to add information to this solution:
I am building a wet plasma table for my shop that is 8'x 16'. I will need hardware and software. Please heko me wuth the list, My phone is 9124273734. I would like to talk with someone if possible. Thanks, Rus