If you would like to use a spindle rather than a router on your existing CNC, we will send you another set of components that will allow the spindle to be mounted properly which includes the z-axis rails, rail support, spindle mounts and the dust shoe components. You can find this item to purchase here: https://www.buildyourcnc.com/category/z-axis

Click the link to add information to this solution:
I own a blacktoe 2x4 cnc. I need to convert to 2.2kw spindle. I cuurently am using the porter cable router spindle.Thanks.

If you would like to use a spindle rather than a router on your existing CNC, we will send you another set of components that will allow the spindle to be mounted properly which includes the z-axis rails, rail support, spindle mounts and the dust shoe components. You can find this item to purchase here: https://www.buildyourcnc.com/category/z-axis

Click the link to add information to this solution:
I have blacktoe 4.1 with porter cable 890 router.To convert to spindle(2.2kw) can I just change the mount?

If you would like to use a spindle rather than a router on your existing CNC, we will send you another set of components that will allow the spindle to be mounted properly which includes the z-axis rails, rail support, spindle mounts and the dust shoe components. You can find this item to purchase here: https://www.buildyourcnc.com/category/z-axis

Click the link to add information to this solution:
I HAVE BLACKTOE 4.1 WITH PORTER CABLE 890 ROUTER.TO CONVERT TO SPINDLE(2.2KW) CAN JUST CHANGE THE MOUNT?

You will not be able to use a router mount for a spindle. You will need to get a spindle mount for your Z axis.

Click the link to add information to this solution:
I currently own a blacktoe router cnc.Want to convert to spindle.Do I use the same Z axis mount?

The motor mounts for the PC 890 series routers will fit the Bosch 1617 routers as well, however you will need to adjust the top mount to accept the slight edge of the Bosch 1617 router at the top motor mount.

Click the link to add information to this solution:
I have a blacktoe router table with a porter cable 892 currently in it. Which other router(s) fit the same mount?

We are currently working on a relay board that will connect to USB breakout board, and the router/spindle for both the on/off function. Unfortunately we still do not have it completed or ready to be placed on our website, but it is in the final stages of testing. Please check back regularly for updated stock!

Here is a link to a tutorial for a DIY relay circuit:

Click the link to add information to this solution:
I AM PUTTING TOGETHER THE BLACKFOOT AND USING A PORTER CABLE ROUTER. CONFUSED ON HOW TO RELAY ROUTETR WITH USB BOARD. IS THERE ANOTHER SWITCH THAT GOES BETWEEN BOARD ROUTER SO PLANET CNC CAN TURN PERHAPS VACUUM OFF?

You are making the right choice. The overall cost benefit of a spindle over a router is worth the change. We used a router back in 2008-2012 and constantly replaced it due to the daily use, but we are still using the same spindle we began using back in 2012.

We sell a mount that you can find here:
https://www.buildyourcnc.com/item/spindle-inverter-2!2kw-spindle-80mm-mount

The mount fits standard 80mm spindles.

Click the link to add information to this solution:
Have a CNC routher that uses the Porter Cable 78125 considering 2.2kw spindle and controller do you have any mounts and our recommenadtions?

The 2.2kW Spindle has many advantages over a standard router such as the Porter Cable. The most obvious benefit to the user is the significant reduction of both dust and noise.

Additional Information:


Additional Information:
What size water source is needed and how long can it be used before it is too warm? Do you have a pressure vs. flow curve for the spindle so I can properly size the water pump?

Additional Information:
I used a small pond pump inside a 5 gallon bucket. I put a little bit of windshield washer fluid in with it to keep anything from growing in it. It's worked great. I've had 1 hour run times with no noticeable increase in spindle temp.

Additional Information:

Click the link to add information to this solution:
I am interested in buying the 2.2 kW spindle. Does it run much quieter than a 2 hp Porter Cable router? You also mention a pump with a bucket of water. How long until the water is too warm to cool the spindle?

You will need a Z-axis mount for Spindle if you are currently using a router.

Click the link to add information to this solution:
Do I need Z axis mount for spindle? I currently have router cnc blacktoe

Yes, our porter cable collets and nuts will fit the porter cable 7518.

Additional Information:

Click the link to add information to this solution:
HAVE PORTER CABLE 7518 ROUTER ON MY CNC AND WOULD LIKE TO KNOW IF YOUR ER20 COLLET NUT, FOR THE CABLE, WILL FIT ROUTER.

We are currently working on a relay board that will connect to USB breakout board, and the router/spindle for both the on/off function. Unfortunately we still do not have it completed or ready to be placed on our website, but it is in the final stages of testing. Please check back regularly for updated stock!

Here is a link to a tutorial for a DIY relay circuit:

Click the link to add information to this solution:
I am putting together the Blackfoot and I am using a porter cable router. I am confused on how to relay the routetr with the USB board. is there another relay switch that goes between the USB board and the router so that planet CNC can turn the router and perhaps the vacuum on and off?

We currently cannot release or sell any plans at this current moment! We apologize for this inconvenience, however if you email us at customerservice@buildyourcnc.com. We can help you get the current parts you will need, for a fully functional 2.2kW z-axis assembly.

Click the link to add information to this solution:
I purachased a bluechick from you in 2011. I am upgrading from a Porter-cable router to a 2.2kw spindle. Can you supply me with drawings for the spindle mount so that I can cut the parts?

Yes, we can make a redLeaf system that has all 6A drivers for use with the 651 oz-in motors. We can also wire the electronics in a way that two of the drivers will use the pins of the same axis so that axis will drive two drivers and motors.

Click the link to add information to this solution:
I am building a cnc router with twin ball screws on the long axis and I will have a rotary axis as well. I need a 5 axis breaker board using only 4 axis total. Can you help me?

You can use the standard electronics combo: http://www.buildyourcnc.com/item/electronicsAndMotors-3axis-425-elcombo. The size of the stepping motors are generally sized with the overall machine structural weight, inertia of parts, the type of mechanical parts used to move the axes, and actually, less by the router which is more connect to how the machine is controlled.

Click the link to add information to this solution:
If I use a Porter Cable 3-3/4 router motor what size stepper motors do I need?

The wire that is connected to the spindle can be a simple extension cord, that you find at a local hardware store. However there is a missing wire that is required(ground) which will have to be the same amperage of the extension cord.

Click the link to add information to this solution:
What wire do I need to power the spindle (ie, from the 220 outlet to the spindle). Would a dryer cable work? Is there specific amperage the wire needs?

The blackToe 2'x4' cnc machine is sold as a kit only. We offer plans for the scratch (book) build machine that can be found here for purchase and also comes with a DVD showing the build process: http://www.buildyourcnc.com/cnckitintro.aspx and the plans for build in the book is on the CNC book page: http://www.buildyourcnc.com/Book.aspx.

You can use the same size stepping motors referenced in the book: http://www.buildyourcnc.com/category/elcombo

Click the link to add information to this solution:
I would like to build the 2’x 4’ blackToe2x4v40 CNC router. I have your book. I want to build the latest model blackToe2x4 v40. Are those the correct plans on your web book page ? Is there a bill of materials? If I use a Porter Cable 3-3/4 router motor what size stepper motors do I need?

To control a spindle using the USB CNC interface, you will need a relay board that contains a transistor that can activate the relay with a power source with enough current that can activate the relay. This video explains all of the information you will need to develop this relay circuit:

Click the link to add information to this solution:
i have a breakout usb controller iam using a spindle output to active a relay 5V but it didnt work.... whats the problem, what else i need to active that realy 5v 10A?

If you remove the dust shoe, you should be able to reach the collet to remove the end mill.

Click the link to add information to this solution:
DO HAVE TO REMOVE THE PORTER CABLE 892 ROUTER EVERY TIME CHANGE BIT?

We actually tried dissassembling one of our spindles in house with no success, but I just found a good thread on CNCZone that has a good set of photos and instructions.

Here is the link: http://www.cnczone.com/forums/spindles-vfd/129454-water-cooled-chinese-spindle-disassembly.html

Please let me know if this helps.

Additional Information:
Also, If you have no success, let us know and we will make an attempt here on video.

Click the link to add information to this solution:
Are there instructions to disassemble the 2.2KW spindle (220v)? We need to replace the bearings.